FLUORESCITE fluorescein sodium 100 mg/mL Injection, Solution
Other active recalls for Fluorescein Sodium (different manufacturers) — 3 · tap to view
🆔 Identity & classification
Where does this data come from?
🏭 Manufacturer & labeler
Where does this data come from?
🩺 Clinical
Patient education
Supplement & herbal interactions
Where does this data come from?
Ask a licensed pharmacist directly — free, answered by our team.
🧪 Inactive Ingredients / Excipients
Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.
💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.
-
UNII QTT17582CB
A strong acid used to adjust and maintain the proper pH level in liquid medicines, ensuring stability and preventing breakdown of active ingredients.
-
UNII 55X04QC32I
A strong alkaline chemical used to adjust and maintain the pH balance of liquid medicines. It helps keep the medicine stable and ensures it stays effective during storage.
-
UNII 059QF0KO0R
Water is a liquid solvent that dissolves and mixes ingredients together in liquid medicines, syrups, and injections. It helps distribute the active drug evenly throughout the product.
3 inactive ingredients listed in the exact product block matched to this NDC.
Where does this data come from?
ingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.Inactive ingredient FAQ
Are inactive ingredients the same for every manufacturer?
Why might an inactive ingredient be missing?
Can inactive ingredients matter?
💲 Pricing
A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.
| Price system | Per mL | Per package |
|---|---|---|
| Retail pharmacies payNADAC · weekly | Not in the retail survey — common for institutional, discontinued, or low-volume packs. | |
| Medicaid paysCMS SDUD · 12 mo | $4.56 | $273.41 / 60 ml |
| Medicare drug plans payPart D · quarterly | No Part D plan price is available for this NDC in our data. | |
Where does this data come from?
🔁 Therapeutic equivalents
| Product | Labeler | Pack | NADAC/unit | TE | Status | Price vs. this |
|---|---|---|---|---|---|---|
| Fluorescite 100 mg/mLthis 00065-0092-65 | Alcon, | 12 vials | — | AP | FDA listed | — |
Where does this data come from?
⏳ Availability & generic status
The FDA lists approved generic versions of this medicine, but that does not always mean a pharmacy can get one today. Patent rules, launch agreements, supply and pricing can affect when generics actually arrive.
Where does this data come from?
🗺️ Medicaid utilization & spend
🔬 Reported adverse events (FAERS)
Top reported reactions
Reporter sex
Serious outcomes
Where does this data come from?
📦 Packaging — all sizes for this product
| Package NDC | Description | Marketing start | Status |
|---|---|---|---|
| 00065-0092-65 You're viewing this | 12 VIAL in 1 CARTON (0065-0092-65) / 5 mL in 1 VIAL | 1972-09-15 | Active |
🧭 About this NDC listing & data coverage
What data is (and isn’t) available for this NDC — tap to expand
| NDC identity (package / product / labeler codes) | ✓ Available |
| Labeler | ✓ Available |
| Product & package description | ✓ Available |
| Marketing category & status | ✓ Available |
| Active ingredient / dosage form / route | ✓ Available |
| FDA label (SPL via DailyMed) | ✓ Available |
| Package photos | ✓ Available |
| Inactive ingredients (structured) | ✓ Available |
| NADAC pharmacy acquisition price (CMS) | — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey. |
| Orange Book / therapeutic-equivalence data | ✓ Available |
| HCPCS J-code billing crosswalk | — Not published for this NDC Most self-administered / retail products have no J-code — that is normal. |
| Medicaid utilization (CMS SDUD) | ✓ Available |
Questions about this listing
Why is there no price listed?
Is the NDC printed on the package the same as the 11-digit billing NDC?
What do the three segments of this NDC mean?
Is this package still being marketed?
Who lists this product with the FDA?
Do I need a prescription for this product?
Where does this data come from?
📄 Full prescribing information FDA SPL
🎯 Indications and Usage ▾
1 INDICATIONS AND USAGE FLUORESCITE ® Injection 10% is indicated in diagnostic fluorescein angiography or angioscopy of the retina and iris vasculature. FLUORESCITE ® Injection 10% is indicated in diagnostic fluorescein angiography or angioscopy of the retina and iris vasculature. (1)
⏱️ Dosage and Administration ▾
2 DOSAGE AND ADMINISTRATION Adult Dose: The normal adult dose of FLUORESCITE® Injection 10% (100 mg/mL) is 500 mg via intravenous administration. (2.1) Pediatric Dose: For children, the dose should be calculated on the basis of 7.7 mg for each kg of actual body weight (or 35 mg for each 10 pounds of body weight) up to a maximum of 500 mg via intravenous administration. (2.1) Do not mix or dilute with other solutions or drugs (2.2)
2.1Dosing Adult Dose The normal adult dose of FLUORESCITE ® Injection 10% (100 mg/mL) is 500 mg via intravenous administration. Pediatric Dose For children, the dose should be calculated on the basis of 7.7 mg for each kg of actual body weight (or 35 mg for each 10 pounds of body weight) up to a maximum of 500 mg via intravenous administration.
2.2Preparation for Administration Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. Do not mix or dilute with other solutions or drugs. Flush IV before and after drugs are injected to avoid physical incompatibility reactions.
2.3Administration Inject the dose rapidly (1 mL per second is normally recommended) intravenously into the antecubital vein, after taking precautions to avoid extravasation. A syringe, filled with FLUORESCITE, may be attached to transparent tubing and a 23 gauge butterfly needle for injection. Insert the needle and draw the patient’s blood to the hub of the syringe so that a small air bubble separates the patient’s blood in the tubing from the fluorescein.
With the room lights on, slowly inject the blood back into the vein while watching the skin over the needle tip. If the needle has extravasated, the patient’s blood will be seen to bulge the skin and the injection should be stopped before any fluorescein is injected. When assured that extravasation has not occurred, the room light may be turned off and the fluorescein injection completed.
Luminescence usually appears in the retina and choroidal vessels in 7 to 14 seconds and can be observed by standard viewing equipment. Reduction in dose from 5 mL to 2 mL of FLUORESCITE Injection 10% may be appropriate in cases when a highly sensitive imaging system e.g., scanning laser ophthalmoscope is used.
💊 Dosage Forms and Strengths ▾
3 DOSAGE FORMS AND STRENGTHS Injection: 500mg/5 mL (100mg/mL) in a single-dose vial. Injection: 500mg/5 mL (100 mg/mL) in a single-dose vial (3)
⛔ Contraindications ▾
4 CONTRAINDICATIONS FLUORESCITE ® Injection 10% is contraindicated in patients with known hypersensitivity to fluorescein or any other ingredients in this product (4.1)
4.1Hypersensitivity FLUORESCITE ® Injection 10% is contraindicated in patients with known hypersensitivity to fluorescein sodium or any other ingredients in this product. Rare cases of death due to anaphylaxis have been reported. [see Warnings and Precautions (5.1) and Adverse Reactions ( 6.3 , 6.4 )]. Fluorescein sodium can induce serious intolerance reactions.
These reactions of intolerance are always unpredictable but they are more frequent in patients who have previously experienced an adverse reaction after fluorescein injection (symptoms other than nausea and vomiting) or in patients with history of allergy such as food or drug induced urticaria, asthma, eczema, allergic rhinitis. Detailed questioning of each patient is recommended before the angiography to evaluate any prior history of allergy.
⚠️ Warnings and Cautions ▾
5 WARNINGS AND PRECAUTIONS Respiratory reactions may require intervention. (5.1) Severe local tissue damage can occur with extravasation during injection. (5.2) Nausea and/or vomiting may occur within minutes following injection. (5.3)
5.1Respiratory Reactions Monitor closely when used in patients with a history of allergy or bronchial asthma. An emergency tray should be available in the event of possible reaction to FLUORESCITE ® Injection 10%. If a potential allergy is suspected, an intradermal skin test may be performed prior to IV administration, (i.e., 0.05 mL injected intradermally to be evaluated 30 to 60 minutes following injection).
Given the sensitivity and specificity of skin testing, a negative skin test is not proof that a patient is not allergic to fluorescein.
5.2Severe Local Tissue Damage Avoid extravasation during injection as the high pH of fluorescein solution can result in severe local tissue damage. The following complications resulting from extravasation of fluorescein have been reported: severe pain in the arm for several hours, sloughing of the skin, superficial phlebitis, subcutaneous granuloma, and toxic neuritis along the median curve in the antecubital area. When significant extravasation occurs, the injection should be discontinued and conservative measures to treat damaged tissue and to relieve pain should be implemented. [ see Administration (2.3) and Adverse Reactions (6.6) ] .
5.3Gastrointestinal Distress Nausea and/or vomiting and gastrointestinal distress occur commonly within the first few minutes following injection. These reactions usually subside within 10 minutes. Diarrhea has also been reported.
🤒 Adverse Reactions ▾
6 ADVERSE REACTIONS The following adverse reactions associated with the use of FLUORESCITE were identified in clinical studies or postmarketing reports. Because some of these reactions were reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. The most common adverse reactions include skin discoloration, urine discoloration, nausea, vomiting, and gastrointestinal distress.
(6) To report SUSPECTED ADVERSE REACTIONS, contact Alcon Laboratories,Inc. at 1-800-757-9195 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.
6.1Skin and Urine Discoloration The most common reaction is temporary yellowish discoloration of the skin and urine. Urine may attain a bright yellow color. Discoloration of the skin usually fades in 6 to 12 hours and usually fades in urine in 24 to 36 hours.
6.2Gastrointestinal Reactions Nausea, vomiting, and gastrointestinal distress are common adverse events. A strong taste may develop after injection. Diarrhea has also been reported.
6.3Hypersensitivity Reactions Symptoms and signs of hypersensitivity have occurred. Generalized hives and itching, bronchospasm and anaphylaxis have been reported. Rare cases of death have been reported. [see Contraindications (4.1) and Warnings and Precautions (5.1) ].
6.4Cardiopulmonary Reactions Cardiac arrest, basilar artery ischemia, severe shock and death may occur rarely.
6.5Neurologic Reactions Headache may occur. Convulsions and syncope may rarely occur following injection.
6.6Thrombophlebitis Thrombophlebitis at the injection site has been reported. Extravasation of the solution at the injection site causes intense pain at the site and a dull aching pain in the injected arm. [see Administration (2.3) and Warnings and Precautions (5.2) ].
👥 Use in Specific Populations ▾
8 USE IN SPECIFIC POPULATIONS Caution should be exercised when fluorescein is administered to a nursing woman. (8.3)
8.1Pregnancy Risk Summary There is insufficient data with the use of fluorescein in pregnant women to inform a drug-associated risk. Adequate animal reproduction studies have not been conducted with fluorescein. Fluorescein sodium should be given to a pregnant woman only if clearly needed.
The background risk of major birth defects and miscarriage for the indicated population is unknown; however, in the U.S. general population, the estimated background risk of major birth defects is 2%-4% and of miscarriage is 15%-20% of clinically recognized pregnancies Data Animal Data Intravenous administration of a single dose of fluorescein to pregnant rats resulted in rapid distribution into the amniotic fluid and fetus.
8.2Lactation Risk Summary Fluorescein injection has been demonstrated to be transferred into human milk for up to 4 days following IV administration.
8.4Pediatric Use Pediatric patients have been included in clinical studies. No overall differences in safety or effectiveness have been observed between pediatric and adult patients.
8.5Geriatric Use No overall differences in safety or effectiveness have been observed between elderly and other adult patients.
🤰 Pregnancy ▾
8.1Pregnancy Risk Summary There is insufficient data with the use of fluorescein in pregnant women to inform a drug-associated risk. Adequate animal reproduction studies have not been conducted with fluorescein. Fluorescein sodium should be given to a pregnant woman only if clearly needed.
The background risk of major birth defects and miscarriage for the indicated population is unknown; however, in the U.S. general population, the estimated background risk of major birth defects is 2%-4% and of miscarriage is 15%-20% of clinically recognized pregnancies Data Animal Data Intravenous administration of a single dose of fluorescein to pregnant rats resulted in rapid distribution into the amniotic fluid and fetus.
🧒 Pediatric Use ▾
8.4Pediatric Use Pediatric patients have been included in clinical studies. No overall differences in safety or effectiveness have been observed between pediatric and adult patients.
🧓 Geriatric Use ▾
8.5Geriatric Use No overall differences in safety or effectiveness have been observed between elderly and other adult patients.
🧬 Clinical Pharmacology ▾
12 CLINICAL PHARMACOLOGY
12.1Mechanism of Action Fluorescein sodium responds to electromagnetic radiation and light between the wavelengths of 465-490 nm and fluoresces, i.e., emits light at wavelengths of 520-530 nm. Thus, the hydrocarbon is excited by blue light and emits light that appears yellowish-green. Following intravenous injection of fluorescein sodium in an aqueous solution, the unbound fraction of the fluorescein can be excited with a blue light flash from a fundus camera as it circulates through the ocular vasculature, and the yellowish green fluorescence of the dye is captured by the camera.
In the fundus, the fluorescence of the dye demarcates the retinal and/or choroidal vasculature under observation, distinguishing it from adjacent areas/structures.
12.3Pharmacokinetics Distribution : Within 7 to 14 seconds after intravenous (IV) administration into antecubital vein, fluorescein usually appears in the central artery of the eye. Within a few minutes of IV administration of fluorescein sodium, a yellowish discoloration of the skin occurs, which begins to fade after 6 to 12 hours of dosing. Various estimates of volume of distribution indicate that fluorescein distributes well into interstitial space (0.5 L/kg).
Elimination Metabolism: Fluorescein undergoes rapid metabolism to fluorescein monoglucuronide. After IV administration of fluorescein sodium (14 mg/kg) to 7 healthy subjects, approximately 80% of fluorescein in plasma was converted to glucuronide conjugate after a period of 1 hour post dose, indicating relatively rapid conjugation. Excretion: Fluorescein and its metabolites are mainly eliminated via renal excretion.
After IV administration, the urine remains slightly fluorescent for 24 to 36 hours. A renal clearance of 1.75 mL/min/kg and a hepatic clearance (due to conjugation) of 1.50 mL/min/kg have been estimated. The systemic clearance of fluorescein was essentially complete by 48 to 72 hours after administration of 500 mg fluorescein.
📦 How Supplied / Storage and Handling ▾
16 HOW SUPPLIED/STORAGE AND HANDLING
16.1How Supplied FLUORESCITE ® (fluorescein injection, USP) 10% is supplied in a single-dose 5 mL glass vial with a gray FluroTec coated chlorobutyl stopper and purple flip-off aluminum seal. The vial stopper is not made with natural rubber latex. The vial contains a sterile, red-orange solution of fluorescein. NDC 0065-0092-65
16.2Storage Store at 2°to 25°C (36° to 77°F). Do Not Freeze
📋 Description ▾
11 DESCRIPTION FLUORESCITE ® (fluorescein injection, USP) 10% contains 10% w/v fluorescein. It is a sterile solution for use intravenously as a diagnostic aid. Its chemical name is 3’,6’-dihydroxyspiro[isobenzofuran-1(3H),9’-[9H]xanthene]-3-one.
The molecular weight is 332.31 g/mol. The active ingredient is represented by the chemical structure: FLUORESCITE ® (fluorescein injection, USP) 10% is supplied as a sterile, unpreserved, unit dose aqueous solution, that has a pH of 8.0 – 9.8 and an osmolality of 572-858 mOsm/kg. Active ingredient: fluorescein sodium Inactive Ingredients: Sodium hydroxide and/or hydrochloric acid (to adjust pH), and water for injection. chemical
💬 Information for Patients ▾
17 PATIENT COUNSELING INFORMATION Skin and Urine Discoloration After administration of fluorescein sodium, skin will attain a temporary yellowish discoloration. Urine attains a bright yellow color. Discoloration of the skin usually fades in 6 to 12 hours and usually fades in urine in 24 to 36 hours. [ see Adverse Reactions (6.1) ] Distributed By: ALCON LABORATORIES, INC. Fort Worth, Texas 76134 USA © 2006, 2016, 2020, 2025 Alcon Inc.