Search by Drug Name or NDC
NDC 00264-7623-20 Dextrose And Sodium Chloride 10; .2 g/100mL; g/100mL Details
Dextrose And Sodium Chloride 10; .2 g/100mL; g/100mL
Dextrose And Sodium Chloride is a INTRAVENOUS INJECTION, SOLUTION in the HUMAN PRESCRIPTION DRUG category. It is labeled and distributed by B. Braun Medical Inc.. The primary component is DEXTROSE; SODIUM CHLORIDE.
Product Information
| NDC | 00264-7623 |
|---|---|
| Product ID | 0264-7623_c488441b-de6f-412a-a12d-b9a3d5949ca2 |
| Associated GPIs | 79993002202038 |
| GCN Sequence Number | 063603 |
| GCN Sequence Number Description | dextrose 10 % and 0.2 % NaCl DEHP FR BG 10 %-0.2 % INTRAVEN |
| HIC3 | C5K |
| HIC3 Description | IV SOLUTIONS: DEXTROSE-SALINE |
| GCN | 99324 |
| HICL Sequence Number | 006094 |
| HICL Sequence Number Description | DEXTROSE 10 % AND 0.2 % SODIUM CHLORIDE |
| Brand/Generic | Generic |
| Proprietary Name | Dextrose And Sodium Chloride |
| Proprietary Name Suffix | n/a |
| Non-Proprietary Name | DEXTROSE and SODIUM CHLORIDE |
| Product Type | HUMAN PRESCRIPTION DRUG |
| Dosage Form | INJECTION, SOLUTION |
| Route | INTRAVENOUS |
| Active Ingredient Strength | 10; .2 |
| Active Ingredient Units | g/100mL; g/100mL |
| Substance Name | DEXTROSE; SODIUM CHLORIDE |
| Labeler Name | B. Braun Medical Inc. |
| Pharmaceutical Class | Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC] |
| DEA Schedule | n/a |
| Marketing Category | NDA |
| Application Number | NDA019631 |
| Listing Certified Through | 2024-12-31 |
Package
Package Images
NDC 00264-7623-20 (00264762320)
| NDC Package Code | 0264-7623-20 |
|---|---|
| Billing NDC | 00264762320 |
| Package | 24 CONTAINER in 1 CASE (0264-7623-20) / 250 mL in 1 CONTAINER |
| Marketing Start Date | 1988-02-24 |
| NDC Exclude Flag | N |
| Pricing Information | N/A |
Standard Product Labeling (SPL)/Prescribing Information SPL 8e6569ce-9714-497f-a94b-c6975c1d76f6 Details
DESCRIPTION
(See chart below for quantitative information.)
Dextrose and Sodium Chloride Injections USP are sterile, nonpyrogenic and contain no bacteriostatic or antimicrobial agents. These products are intended for intravenous administration.
The formulas of the active ingredients are:
| Ingredients | Molecular Formula | Molecular Weight |
|---|---|---|
| Sodium Chloride USP | NaCl | 58.44 |
| Hydrous Dextrose USP |  | 198.17 |
| Composition – Each 100 mL contains: | Concentration of Electrolytes (mEq/liter) | ||||||
|---|---|---|---|---|---|---|---|
| Hydrous Dextrose USP | Sodium Chloride USP | Calories per liter | Calculated Osmolarity mOsmol/liter | pH | |||
| Solution | Sodium | Chloride | |||||
| Water for Injection USP qs | |||||||
| 3.3% Dextrose and 0.30% Sodium Chloride Injection USP | 3.3 g | 0.3 g | 51 | 51 | 110 | 270 | 4.5 (3.5–6.5) |
| 5% Dextrose and 0.9% Sodium Chloride Injection USP | 5 g | 0.9 g | 154 | 154 | 170 | 560 | 4.4 (3.5–6.5) |
| 5% Dextrose and 0.45% Sodium Chloride Injection USP | 5 g | 0.45 g | 77 | 77 | 170 | 405 | 4.4 (3.5–6.5) |
| 5% Dextrose and 0.33% Sodium Chloride Injection USP | 5 g | 0.33 g | 56 | 56 | 170 | 365 | 4.4 (3.5–6.5) |
| 5% Dextrose and 0.20% Sodium Chloride Injection USP | 5 g | 0.2 g | 34 | 34 | 170 | 320 | 4.4 (3.5–6.5) |
| 10% Dextrose and 0.45% Sodium Chloride Injection USP | 10 g | 0.45 g | 77 | 77 | 340 | 660 | 4.3 (3.5–6.5) |
| 10% Dextrose and 0.20% Sodium Chloride Injection USP | 10 g | 0.2 g | 34 | 34 | 340 | 575 | 4.3 (3.5–6.5) |
Not made with natural rubber latex, PVC or DEHP.
The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary.
Addition of medication should be accomplished using complete aseptic technique.
The closure system has two ports; the one for the administration set has a tamper evident plastic protector and the other is a medication addition site. Refer to the Directions for Use of the container.
CLINICAL PHARMACOLOGY
Dextrose and Sodium Chloride Injections USP provide electrolytes and calories and are a source of water for hydration. All are capable of inducing diuresis depending on the clinical condition of the patient.
Sodium, the major cation of the extracellular fluid, functions primarily in the control of water distribution, fluid balance, and osmotic pressure of body fluids. Sodium is also associated with chloride and bicarbonate in the regulation of the acid-base equilibrium of body fluid.
Chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base balance of the body are reflected by changes in the chloride concentration.
Dextrose provides a source of calories. Dextrose is readily metabolized, may decrease losses of body protein and nitrogen, promotes glycogen deposition and decreases or prevents ketosis if sufficient doses are provided.
INDICATIONS AND USAGE
CONTRAINDICATIONS
WARNINGS
The administration of intravenous solutions can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentration. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration. Solutions containing sodium ions should be used with great care, if at all, in patients with congestive heart failure, severe renal insufficiency, and in clinical states in which there is sodium retention with edema. In patients with diminished renal function, administration of solutions containing sodium ions may result in sodium retention. Infusion of isotonic (0.9%) sodium chloride during or immediately after surgery may result in excessive sodium retention. Use the patient's circulatory system status as a guide.
Excessive administration of potassium-free dextrose solutions may result in significant hypokalemia. Serum potassium levels should be maintained and potassium supplemented as required.
Solutions containing dextrose and low electrolyte concentrations should not be administered simultaneously with blood through the same infusion set because of the possibility of pseudoagglutination or hemolysis.
PRECAUTIONS
General
These solutions should be used with care in patients with hypervolemia, renal insufficiency, urinary tract obstruction, or impending or frank cardiac decompensation. Extraordinary electrolyte losses such as may occur during protracted nasogastric suction, vomiting, diarrhea or gastrointestinal fistula drainage may necessitate additional electrolyte supplementation.
Additional essential electrolytes, minerals and vitamins should be supplied as needed. Sodium-containing solutions should be administered with caution to patients receiving corticosteroids or corticotropin, or to other salt-retaining patients. Care should be exercised in administering solutions containing sodium to patients with renal or cardiovascular insufficiency, with or without congestive heart failure, particularly if they are postoperative or elderly.
Infusion of more than one liter of isotonic (0.9%) sodium chloride per day may supply more sodium and chloride than normally found in serum, and can exceed normal tolerance, resulting in hypernatremia; this may also cause a loss of bicarbonate ions, resulting in an acidifying effect.
Solutions containing dextrose should be used with caution in patients with overt or known subclinical diabetes mellitus, or carbohydrate intolerance for any reason. Hypokalemia may develop during parenteral administration of hypertonic dextrose solutions. Sufficient amounts of potassium should be added to dextrose solutions administered to fasting patients with good renal function, especially those on digitalis therapy.
To minimize the risk of possible incompatibilities arising from mixing any of these solutions with other additives that may be prescribed, the final infusate should be inspected for cloudiness or precipitation immediately after mixing, prior to administration and periodically during administration.
Do not use plastic containers in series connection.
If administration is controlled by a pumping device, care must be taken to discontinue pumping action before the container runs dry or air embolism may result. If administration is not controlled by a pumping device, refrain from applying excessive pressure (>300mmHg) causing distortion to the container such as wringing or twisting. Such handling could result in breakage of the container.
These solutions are intended for intravenous administration using sterile equipment. It is recommended that intravenous administration apparatus be replaced at least once every 24 hours.
Use only if solution is clear and container and seals are intact.
Laboratory Tests
Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance during prolonged parenteral therapy or whenever the condition of the patient warrants such evaluation. Significant deviations from normal concentrations may require tailoring of the electrolyte pattern, in these or alternative solutions.
Carcinogenesis, Mutagenesis, Impairment of Fertility
Studies with Dextrose and Sodium Chloride Injections USP have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility.
Pregnancy
Teratogenic Effects
Animal reproduction studies have not been conducted with Dextrose and Sodium Chloride Injections USP. It is also not known whether Dextrose and Sodium Chloride Injections USP can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Dextrose and Sodium Chloride Injections USP should be given to a pregnant woman only if clearly needed.
Labor and Delivery
The effects of Dextrose and Sodium Chloride Injections USP on the duration of labor or delivery, on the possibility that forceps delivery or other intervention or resuscitation of the newborn will be necessary, and on the later growth, development, and functional maturation of the child are unknown.
As reported in the literature, sodium and dextrose containing solutions have been administered during labor and delivery. Caution should be exercised, and the fluid balance, glucose and electrolyte concentrations, and acid-base balance, of both mother and fetus should be evaluated periodically or whenever warranted by the condition of the patient or fetus.
Nursing Mothers
It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when Dextrose and Sodium Chloride Injections USP are administered to a nursing woman.
Pediatric Use
Safety and effectiveness of Dextrose and Sodium Chloride Injections USP in pediatric patients have not been established by adequate and well-controlled studies.
Dextrose is safe and effective for the stated indications in pediatric patients (see INDICATIONS AND USAGE). As reported in the literature, the dosage selection and constant infusion rate of intravenous dextrose must be selected with caution in pediatric patients, particularly neonates and low birth weight infants, because of the increased risk of hyperglycemia/hypoglycemia. Frequent monitoring of serum glucose concentrations is required when dextrose is prescribed to pediatric patients, particularly neonates and low birth weight infants.
In neonates or in very small infants even small volumes of fluid may affect fluid and electrolyte balance. Care must be exercised in treatment of neonates, especially pre-term neonates, whose renal function may be immature and whose ability to excrete fluid and solute loads may be limited. Fluid intake, urine output, and serum electrolytes should be monitored closely. See WARNINGS and DOSAGE AND ADMINISTRATION.
Geriatric Use
Clinical studies of Dextrose and Sodium Chloride Injections USP did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Other reported clinical experience has not identified differences in responses between elderly and younger patients.
In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.
These drugs are known to be substantially excreted by the kidney, and the risk of toxic reactions to these drugs may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.
See WARNINGS.
ADVERSE REACTIONS
Reactions which may occur because of the solution or the technique of administration include febrile response, infection at the site of injection, venous thrombosis or phlebitis extending from the site of injection, extravasation and hypervolemia.
Too rapid infusion of hypertonic solutions may cause local pain and venous irritation. Rate of administration should be adjusted according to tolerance. Use of the largest peripheral vein and a small bore needle is recommended. (See DOSAGE AND ADMINISTRATION.)
Symptoms may result from an excess or deficit of one or more of the ions present in the solution; therefore, frequent monitoring of electrolyte levels is essential.
Hypernatremia may be associated with edema and exacerbation of congestive heart failure due to the retention of water, resulting in an expanded extracellular fluid volume. If infused in large amounts, chloride ions may cause a loss of bicarbonate ions, resulting in an acidifying effect.
The physician should also be alert to the possibility of adverse reactions to drug additives diluted and administered from the plastic container. Prescribing information for drug additives to be administered in this manner should be consulted.
If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures, and save the remainder of the fluid for examination if deemed necessary.
OVERDOSAGE
DOSAGE AND ADMINISTRATION
These solutions are for intravenous use only.
Dosage is to be directed by a physician and is dependent upon age, weight, clinical condition of the patient and laboratory determinations. Frequent laboratory determinations and clinical evaluation are essential to monitor changes in blood glucose and electrolyte concentrations, and fluid and electrolyte balance during prolonged parenteral therapy.
When a hypertonic solution is to be administered peripherally, it should be slowly infused through a small bore needle, placed well within the lumen of a large vein to minimize venous irritation. Carefully avoid infiltration.
In the average adult, daily requirements of sodium and chloride are met by the infusion of one liter of fluid containing 0.9% sodium chloride (154 mEq each of sodium and chloride).
Fluid administration should be based on calculated maintenance or replacement fluid requirements for each patient.
Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store.
Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit.
Pediatric Use
There is no specific pediatric dose. The dose is dependent on weight, clinical condition, and laboratory results. See WARNINGS and PRECAUTIONS.
HOW SUPPLIED
Dextrose and Sodium Chloride Injections USP are supplied sterile and nonpyrogenic in EXCEL® Containers. The 1000 mL containers are packaged 12 per case; the 500 mL and 250 mL containers are packaged 24 per case.
| Canada DIN | NDC | REF | Size |
|---|---|---|---|
| 3.3% Dextrose and 0.30% Sodium Chloride Injection USP | |||
| 01927981 | 0264-7608-00 | L6080-00 | 1000 mL |
| 0264-7608-10 | L6081-00 | 500 mL | |
| 5% Dextrose and 0.9% Sodium Chloride Injection USP | |||
| 01924435 | 0264-7610-00 | L6100 | 1000 mL |
| 0264-7610-10 | L6101 | 500 mL | |
| 5% Dextrose and 0.45% Sodium Chloride Injection USP | |||
| 01927531 | 0264-7612-00 | L6120 | 1000 mL |
| 0264-7612-10 | L6121 | 500 mL | |
| 0264-7612-20 | L6122 | 250 mL | |
| 5% Dextrose and 0.33% Sodium Chloride Injection USP | |||
| 0264-7614-00 | L6140 | 1000 mL | |
| 0264-7614-10 | L6141 | 500 mL | |
| 5% Dextrose and 0.20% Sodium Chloride Injection USP | |||
| 01927558 | 0264-7616-00 | L6160 | 1000 mL |
| 0264-7616-10 | L6161 | 500 mL | |
| 0264-7616-20 | L6162 | 250 mL | |
| 10% Dextrose and 0.45% Sodium Chloride Injection USP | |||
| 0264-7622-00 | L6220 | 1000 mL | |
| 10% Dextrose and 0.20% Sodium Chloride Injection USP | |||
| 0264-7623-20 | L6232 | 250 mL | |
SPL UNCLASSIFIED SECTION
Directions for Use of EXCEL® Container
Caution: Do not use plastic containers in series connection.
To Open
Tear overwrap down at notch and remove solution container. Check for minute leaks by squeezing solution container firmly. If leaks are found, discard solution as sterility may be impaired. If supplemental medication is desired, follow directions below before preparing for administration.
NOTE: Before use, perform the following checks:
Inspect each container. Read the label. Ensure solution is the one ordered and is within the expiration date.
Invert container and carefully inspect the solution in good light for cloudiness, haze, or particulate matter. Any container which is suspect should not be used.
Use only if solution is clear and container and seals are intact.
Preparation for Administration
1. Remove plastic protector from sterile set port at bottom of container.
2. Attach administration set. Refer to complete directions accompanying set.
To Add Medication
Warning: Some additives may be incompatible.
To Add Medication Before Solution Administration
1. Prepare medication site.
2. Using syringe with 18 – 22 Ga. needle, puncture medication port and inner diaphragm and inject.
3. Squeeze and tap ports while ports are upright and mix solution and medication thoroughly.
To Add Medication During Solution Administration
1. Close clamp on the set.
2. Prepare medication site.
3. Using syringe with 18 – 22 Ga. needle of appropriate length (at least 5/8 inch), puncture
resealable medication port and inner diaphragm and inject.
4. Remove container from IV pole and/or turn to an upright position.
5. Evacuate both ports by tapping and squeezing them while container is in the upright position.
6. Mix solution and medication thoroughly.
7. Return container to in use position and continue administration.
SPL UNCLASSIFIED SECTION
PRINCIPAL DISPLAY PANEL - 1000 mL Container Label
3.3% Dextrose and
0.30% Sodium Chloride
Injection USP
REF L6080-00
NDC 0264-7608-00
DIN 01927981
1000 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 3.3 g;
Sodium Chloride USP 0.3 g; Water for Injection USP qs
pH: 4.5 (3.5-6.5); Calc. Osmolarity: 270 mOsmol/liter
Electrolytes (mEq/liter): Na+ 51; Cl– 51
Sterile, nonpyrogenic. Single dose container. Do not use in
series connection. For intravenous use only. Use only if
solution is clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With
Blood. Some additives may be incompatible. Consult
with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the
overwrap, check for minute leaks by squeezing container firmly. If
leaks are found, discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-252
LD-183-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 500 mL Container Label
3.3% Dextrose and
0.30% Sodium Chloride
Injection USP
REF L6081-00
NDC 0264-7608-10
DIN 01927981
500 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 3.3 g; Sodium Chloride USP 0.3 g;
Water for Injection USP qs
pH: 4.5 (3.5-6.5); Calc. Osmolarity: 270 mOsmol/liter
Electrolytes (mEq/liter): Na+ 51; Cl– 51
Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For
intravenous use only. Use only if solution is clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood. Some additives may be
incompatible. Consult with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from
freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap, check for minute
leaks by squeezing container firmly. If leaks are found, discard solution as sterility may
be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-246
LD-184-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 1000 mL Container Label
5% Dextrose and
0.9% Sodium Chloride
Injection USP
REF L6100
NDC 0264-7610-00
DIN 01924435
HK 22608
1000 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g;
Sodium Chloride USP 0.9 g; Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 560 mOsmol/liter,
hypertonic
Electrolytes (mEq/liter): Na+ 154; Cl– 154
Sterile, nonpyrogenic. Single dose container. Do not use in
series connection. For intravenous use only. Use only if
solution is clear and container and seals are intact.
WARNINGS: Some additives may be incompatible. Consult
with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the
overwrap, check for minute leaks by squeezing container firmly. If
leaks are found, discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-253
LD-177-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 500 mL Container Label
5% Dextrose and
0.9% Sodium Chloride
Injection USP
REF L6101
NDC 0264-7610-10
DIN 01924435
HK 22608
500 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g; Sodium Chloride USP 0.9 g;
Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 560 mOsmol/liter, hypertonic
Electrolytes (mEq/liter): Na+ 154; Cl– 154
Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For
intravenous use only. Use only if solution is clear and container and seals are
intact.
WARNINGS: Some additives may be incompatible. Consult with pharmacist. When
introducing additives, use aseptic techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect
from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap, check for minute
leaks by squeezing container firmly. If leaks are found, discard solution as sterility
may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-247
LD-176-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 1000 mL Container Label
5% Dextrose and
0.45% Sodium Chloride
Injection USP
REF L6120
NDC 0264-7612-00
DIN 01927531
HK 22607
1000 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g;
Sodium Chloride USP 0.45 g; Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 405 mOsmol/liter,
hypertonic
Electrolytes (mEq/liter): Na+ 77; Cl– 77
Sterile, nonpyrogenic. Single dose container. Do not use in
series connection. For intravenous use only. Use only if
solution is clear and container and seals are intact.
WARNINGS: Some additives may be incompatible. Consult
with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the
overwrap, check for minute leaks by squeezing container firmly. If
leaks are found, discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-254
LD-108-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 500 mL Container Label
5% Dextrose and
0.45% Sodium Chloride
Injection USP
REF L6121
NDC 0264-7612-10
DIN 01927531
HK 22607
500 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g; Sodium Chloride USP 0.45 g;
Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 405 mOsmol/liter, hypertonic
Electrolytes (mEq/liter): Na+ 77; Cl– 77
Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For
intravenous use only. Use only if solution is clear and container and seals are
intact.
WARNINGS: Some additives may be incompatible. Consult with pharmacist. When
introducing additives, use aseptic techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect
from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap, check for minute
leaks by squeezing container firmly. If leaks are found, discard solution as sterility
may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-248
LD-113-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 250 mL Container Label
5% Dextrose and
0.45% Sodium Chloride
Injection USP
REF L6122
NDC 0264-7612-20
DIN 01927531
HK 22607
250 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g; Sodium
Chloride USP 0.45 g; Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 405 mOsmol/liter,
hypertonic
Electrolytes (mEq/liter): Na+ 77; Cl– 77
Sterile, nonpyrogenic. Single dose container. Do not use in series
connection. For intravenous use only. Use only if solution is clear and
container and seals are intact.
WARNINGS: Some additives may be incompatible. Consult with
pharmacist. When introducing additives, use aseptic techniques.
Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive
heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap,
check for minute leaks by squeezing container firmly. If leaks are found,
discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-245
LD-114-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 1000 mL Container Label
5% Dextrose and
0.33% Sodium Chloride
Injection USP
REF L6140
NDC 0264-7614-00
1000 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g;
Sodium Chloride USP 0.33 g; Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 365 mOsmol/liter,
hypertonic
Electrolytes (mEq/liter): Na+ 56; Cl– 56
Sterile, nonpyrogenic. Single dose container. Do not use in
series connection. For intravenous use only. Use only if
solution is clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood.
Some additives may be incompatible. Consult with
pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the
overwrap, check for minute leaks by squeezing container firmly. If
leaks are found, discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
Y94-003-255
LD-115-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 500 mL Container Label
5% Dextrose and
0.33% Sodium Chloride
Injection USP
REF L6141
NDC 0264-7614-10
500 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g; Sodium Chloride USP 0.33 g;
Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 365 mOsmol/liter, hypertonic
Electrolytes (mEq/liter): Na+ 56; Cl– 56
Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For
intravenous use only. Use only if solution is clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood. Some additives may be
incompatible. Consult with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from
freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap, check for
minute leaks by squeezing container firmly. If leaks are found, discard solution as
sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
Y94-003-249
LD-174-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 1000 mL Container Label
5% Dextrose and
0.20% Sodium Chloride
Injection USP
REF L6160
NDC 0264-7616-00
DIN 01927558
HK 22606
1000 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g;
Sodium Chloride USP 0.2 g; Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 320 mOsmol/liter
Electrolytes (mEq/liter): Na+ 34 ; Cl– 34
Sterile, nonpyrogenic. Single dose container. Do not use in
series connection. For intravenous use only. Use only if
solution is clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood.
Some additives may be incompatible. Consult with
pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the
overwrap, check for minute leaks by squeezing container firmly. If
leaks are found, discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-256
LD-172-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 500 mL Container Label
5% Dextrose and
0.20% Sodium Chloride
Injection USP
REF L6161
NDC 0264-7616-10
DIN 01927558
HK 22606
500 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g; Sodium Chloride USP 0.2 g;
Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 320 mOsmol/liter
Electrolytes (mEq/liter): Na+ 34; Cl– 34
Sterile, nonpyrogenic. Single dose container. Do not use in series connection. For
intravenous use only. Use only if solution is clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood. Some additives may be
incompatible. Consult with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive heat. Protect from
freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap, check for minute
leaks by squeezing container firmly. If leaks are found, discard solution as sterility may
be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-250
LD-112-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 250 mL Container Label
5% Dextrose and
0.20% Sodium Chloride
Injection USP
REF L6162
NDC 0264-7616-20
DIN 01927558
HK 22606
250 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 5 g; Sodium
Chloride USP 0.2 g; Water for Injection USP qs
pH: 4.4 (3.5-6.5); Calc. Osmolarity: 320 mOsmol/liter
Electrolytes (mEq/liter): Na+ 34; Cl– 34
Sterile, nonpyrogenic. Single dose container. Do not use in series
connection. For intravenous use only. Use only if solution is clear and
container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood. Some
additives may be incompatible. Consult with pharmacist. When
introducing additives, use aseptic techniques. Mix thoroughly.
Do not store.
Recommended Storage: Room temperature (25°C). Avoid excessive
heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap,
check for minute leaks by squeezing container firmly. If leaks are found,
discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
In Canada, distributed by:
B. Braun of Canada, Ltd.
Scarborough, Ontario M1H 2W4
Y94-003-258
LD-171-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 1000 mL Container Label
10% Dextrose and
0.45% Sodium Chloride
Injection USP
REF L6220
NDC 0264-7622-00
1000 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 10 g;
Sodium Chloride USP 0.45 g; Water for Injection USP qs
pH: 4.3 (3.5-6.5); Calc. Osmolarity: 660 mOsmol/liter,
hypertonic
Electrolytes (mEq/liter): Na+ 77; Cl– 77
Sterile, nonpyrogenic. Single dose container. Do not use in
series connection. For intravenous use only. Use only if
solution is clear and container and seals are intact.
WARNINGS: Some additives may be incompatible. Consult
with pharmacist. When introducing additives, use aseptic
techniques. Mix thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the
overwrap, check for minute leaks by squeezing container firmly. If
leaks are found, discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
Y94-003-257
LD-170-3
EXP
LOT
PRINCIPAL DISPLAY PANEL - 250 mL Container Label
10% Dextrose and
0.20% Sodium Chloride
Injection USP
REF L6232
NDC 0264-7623-20
250 mL
EXCEL® CONTAINER
Each 100 mL contains: Hydrous Dextrose USP 10 g;
Sodium Chloride USP 0.2 g; Water for Injection USP qs
pH: 4.3 (3.5-6.5); Calc. Osmolarity: 575 mOsmol/liter,
hypertonic
Electrolytes (mEq/liter): Na+ 34; Cl– 34
Sterile, nonpyrogenic. Single dose container. Do not use in series
connection. For intravenous use only. Use only if solution is
clear and container and seals are intact.
WARNINGS: Do Not Administer Simultaneously With Blood.
Some additives may be incompatible. Consult with pharmacist.
When introducing additives, use aseptic techniques. Mix
thoroughly. Do not store.
Recommended Storage: Room temperature (25°C). Avoid
excessive heat. Protect from freezing. See Package Insert.
Do not remove overwrap until ready for use. After removing the overwrap,
check for minute leaks by squeezing container firmly. If leaks are found,
discard solution as sterility may be impaired.
Not made with natural rubber latex, PVC or DEHP.
Rx only
EXCEL is a registered trademark of B. Braun Medical Inc.
B. Braun Medical Inc.
Bethlehem, PA 18018-3524 USA
1-800-227-2862
Y94-003-259
LD-169-4
EXP
LOT
INGREDIENTS AND APPEARANCE
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
| DEXTROSE AND SODIUM CHLORIDE
dextrose and sodium chloride injection, solution |
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
|
||||||||||||||||||||
| Labeler - B. Braun Medical Inc. (002397347) |