💉image loading
(from DailyMed)

UNASYN ampicillin sodium and sulbactam 100 mg/mL; 50 mg/mL Injection, Powder, For Solution — NDC 0049-0024-28 (Billing 00049-0024-28)

by Roerig · 1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE

This is a package of UNASYN ampicillin sodium and sulbactam 100 mg/mL; 50 mg/mL Injection, Powder, For Solution from Roerig, no longer marketed (first marketed Nov 1991), no longer in the FDA NDC Directory. It is this product's only package size.

NDC 00049-0024-28
🏷️ FDA NDC (as labeled) 0049-0024-28 billing pads the labeler segment with a zero
Rx only Brand Discontinued Non-controlled ⚠ Discontinued by firm ⇄ Compare with another NDC
🗂️ FDA directory synced Oct 1, 2026 · this listing last changed Jul 24, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

NDC database record

One package, one record: these facts belong to NDC 0049-0024-28 alone.

Record
FDA NDC Directory package listing · Human prescription drug
Code segments
0049 labeler · 0024 product · 28 package
Package marketed since
Nov 22, 1991
Sample package
No — commercial package
Listing certified through
Dec 31, 2027
Barcode (UPC-A, from the NDC)
3 0049002428 0
FDA record last changed
Jul 24, 2026
⚠️
Excluded from the active FDA NDC Directory. The labeler reported this product as discontinued, so it is excluded from the active NDC Directory. The listing was last certified through May 2010. A label may still appear on DailyMed, but the NDC is no longer in the current FDA NDC Directory. Search the FDA NDC Directory ↗

Identity & classification

Regulatory identifiers FDA, NLM and CMS codes for this package

FDA NDC (as labeled) 0049-0024-28
Product NDC 0049-0024
11-digit billing NDC 00049002428
NCPDP billing unit EA — each (per item)
RxCUI 205843, 240984
UNII JFN36L5S8K, DKQ4T82YE6
Application # NDA050608
SPL Set ID 12eeb72a-403d-41be-bae4-4cb930862884
Established class (EPC) Penicillin-class Antibacterial; beta Lactamase Inhibitor
Mechanism of action beta Lactamase Inhibitors
Chemical class Penicillins
DEA schedule Non-controlled
Marketing category NDA
Marketing status Discontinued
FDA listing status Discontinued by firm (certified through May 2010)
Marketing start 1991-11-22
Route INTRAMUSCULAR, INTRAVENOUS
Dosage form INJECTION, POWDER, FOR SOLUTION
Substance AMPICILLIN SODIUM; SULBACTAM SODIUM
TE code (Orange Book) AP · RLD · RS

Drug-database identifiers Medi-Span GPI and First Databank GCN / HICL / AHFS classification

GCN Seq No 022137
GCN 89523
HICL code 003948
Ingredient (HICL) Ampicillin Sod/Sulbactam Sod
HIC1 code W
Therapeutic class — broad (HIC1) Anti-Infecting Agents
HIC2 code W1
Therapeutic class — intermediate (HIC2) Antibiotics
HIC3 code W1A
Therapeutic class — specific (HIC3) Penicillin Antibiotics
AHFS code 08:12.16.08
AHFS class Aminopenicillin Antibiotics
FDB label name UNASYN 15 GM VIAL
FDB brand name Unasyn
Legend status F — Federal legend — prescription drug or device
Quick answers
  • GSN (GCN sequence number): 022137
  • GCN: 89523
  • HICL (First Databank): 003948
  • AHFS class code: 08:12.16.08
  • RxCUI (RxNorm): 205843
Why two NDCs? The FDA registers this code as 0049-0024-28 — a 4-4-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the labeler segment → 00049-0024-28. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

RxNorm drug class

This medicine belongs to the beta Lactamase Inhibitor class.

Pharmacologic class beta Lactamase Inhibitor
Drug family (ATC) Beta-lactamase inhibitors
How it works beta Lactamase Inhibitors
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

Clinical

Label name UNASYN 15 GM VIAL Ingredient Ampicillin Sod/Sulbactam Sod
📗 Our plain-language guide HelloPharmacist
  • This injection is used to fight specific bacterial infections — mainly skin and wound infections, infections inside the abdomen, and gynecological (pelvic) infections. It's especia...
  • What kinds of infections does this antibiotic treat?
  • Great question. Ampicillin is the main antibiotic that kills bacteria, but some bacteria make an enzyme called a beta-lactamase that destroys ampicillin before it can work. Sulbact...
  • Why does this antibiotic have two drugs in it?
📖 Read our full Ampicillin and Sulbactam Injection guide →
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer mLPer package
Retail pharmacies payNADAC · weekly Not in the retail survey — common for institutional, discontinued, or low-volume packs.
Medicaid paysCMS SDUD · 12 mo No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · quarterly No Part D plan price is available for this NDC in our data.
Medicare Part B allowsASP · J0295 $1.451 / J0295 unit —
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

Billing & reimbursement

FDA NDC (as labeled)0049-0024-28
11-digit billing NDC00049-0024-28
Format4-4-2 as registered → padded to 5-4-2 for billing (zero added to the labeler segment)
HCPCS J-codeJ0295
DescriptorInjection, ampicillin sodium/sulbactam sodium, per 1.5 gm
Billing units / pkg10 units
How the units are derivedThis package is 1; the HCPCS unit is 1.5 GM, so one package = 10 billing units.
Medicare Part B spend (2026 (Q1))$1,335 · 256 claims · $5.22 per claim (all NDCs under J0295)
Crosswalk sourceCMS ASP NDC-HCPCS Crosswalk
Where does this data come from?
The HCPCS J-code crosswalk comes from the CMS ASP NDC-HCPCS crosswalk and the DMEPDAC (DME MAC) NDC-HCPCS crosswalk — free public CMS data. Billing units are derived from the code’s descriptor and the package amount.

Packaging — all sizes for this product

Package NDCDescription Marketing startMarketing endStatus
00049-0024-28 You're viewing this Main listing 1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE 1991-11-22 — Discontinued by firm

Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Unasyn 100 mg/mL; 50 mg/mLthis 00049-0024-28 Roerig 1 vial — AP Discontinued —
Ampicillin and Sulbactam 100 mg/mL; 50 mg/mL 00641-6118-01 Hikma 100 ml — AP FDA listed —
ampicillin and sulbactam 100 mg/mL; 50 mg/mL 25021-0144-99 Sagent 1 bottle — AP FDA listed —
Ampicillin and Sulbactam 10 g/1; 5 g 44567-0212-01 WG 1 vial — AP FDA listed —
Ampicillin and Sulbactam 100 mg/mL; 50 mg/mL 55150-0118-99 Eugia 1 vial — AP FDA listed —
Ampicillin and Sulbactam 10 g/1; 5 g 71288-0033-75 Meitheal 1 bottle — AP FDA listed —
Ampicillin Sodium and Sulbactam Sodium 10 g/15g; 5 g/15g 72485-0418-15 Armas 1 bottle — AP FDA listed —
Ampicillin and Sulbactam 10 g/1; 5 g 72603-0444-01 NorthStar 10 bottles — AP FDA listed —
Ampicillin Sodium and Sulbactam Sodium 10 g/15g; 5 g/15g 83270-0308-01 ONESOURCE 1 bottle — AP FDA listed —
Ampicillin and Sulbactam 10 g/1; 5 g 83634-0108-99 Avenacy, 1 bottle — AP FDA listed —
About this product: this is the brand-name version. Some generic versions are approved by the FDA, but we could not confirm current pharmacy availability from our pricing/market data.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

Availability & generic status

🏛️
1991
On the market since
Nov 1991
📍
2026
Currently FDA-listed
35 years listed
🔒
·
Generic approved (availability unconfirmed)
see note
🔒Generic approved by FDA, but pharmacy availability is not confirmed

The FDA lists approved generic versions of this medicine, but that does not always mean a pharmacy can get one today. Patent rules, launch agreements, supply and pricing can affect when generics actually arrive.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

Loading inactive ingredients from the official FDA label in the background. No external source is being called by this page request.
Where does this data come from?
Source: official FDA Structured Product Labeling (SPL) via DailyMed and the openFDA label index. Structured IACT rows and label-wide narrative are kept separate; availability and product-level specificity depend on the submitted label.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

Manufacturer & labeler

LabelerRoerig
Application holderPFIZER INC
FDA applicationNDA050608 (NDA)
Labeler code00049
First marketedNov 1991
Product typeHuman Prescription Drug
Portfolio33 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Very long sections are excerpted here and marked; the full text is on DailyMed (linked in the sources below). Jump with a chip, search within the label, or expand everything.
🎯 Indications and Usage ~1 min read ▾

INDICATIONS AND USAGE UNASYN is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus , Escherichia coli , Efficacy for this organism in this organ system was studied in fewer than 10 infections. Klebsiella spp.

(including K. pneumoniae ), Proteus mirabilis , Bacteroides fragilis , Enterobacter spp., and Acinetobacter calcoaceticus. NOTE: For information on use in pediatric patients (see PRECAUTIONS-Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli , Klebsiella spp.

(including K. pneumoniae ), Bacteroides spp. (including B. fragilis ), and Enterobacter spp. Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli, and Bacteroides spp.

(including B. fragilis ). While UNASYN is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with UNASYN due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to UNASYN should not require the addition of another antibacterial.

Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to UNASYN. Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate.

To reduce the development of drug-resistant bacteria and maintain effectiveness of UNASYN and other antibacterial drugs, UNASYN should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

⏱️ Dosage and Administration ~2 min read ▾

DOSAGE AND ADMINISTRATION The pharmacy bulk package is for preparation of solutions for IV infusion only. UNASYN should be administered diluted with 50 mL to 100 mL of a compatible diluent as an intravenous infusion over 15–30 minutes. The recommended adult dosage of UNASYN is 1.5 g (ampicillin 1 g and sulbactam 0.5 g) to 3 g (ampicillin 2 g and sulbactam 1 g) every six hours.

This 1.5 g to 3 g range represents the total of ampicillin content plus the sulbactam content of UNASYN, and corresponds to a range of 1 g ampicillin and 0.5 g sulbactam to 2 g ampicillin and 1 g sulbactam. The total dose of sulbactam should not exceed 4 g per day. Pediatric Patients 1 Year of Age or Older The recommended daily dose of UNASYN in pediatric patients is 300 mg per kg of body weight administered via intravenous infusion in equally divided doses every 6 hours.

This 300 mg/kg/day dosage represents the total ampicillin content plus the sulbactam content of UNASYN, and corresponds to 200 mg ampicillin and 100 mg sulbactam per kg per day. The safety and efficacy of UNASYN administered via intramuscular injection in pediatric patients have not been established. Pediatric patients weighing 40 kg or more should be dosed according to adult recommendations, and the total dose of sulbactam should not exceed 4 g per day.

The course of intravenous therapy should not routinely exceed 14 days. In clinical trials, most pediatric patients received a course of oral antimicrobials following initial treatment with intravenous UNASYN. (see CLINICAL STUDIES section).

Impaired Renal Function In patients with impairment of renal function the elimination kinetics of ampicillin and sulbactam are similarly affected, hence the ratio of one to the other will remain constant whatever the renal function. The dose of UNASYN in such patients should be administered less frequently in accordance with the usual practice for ampicillin and according to the following recommendations: TABLE 3 UNASYN Dosage Guide for Patients with Renal Impairment Creatinine Clearance (mL/min/1.73m 2 ) Ampicillin and Sulbactam Half-Life (Hours) Recommended UNASYN Dosage ≥30 1 1.5 g to 3 g every 6 to 8 hours 15–29 5 1.5 g to 3 g every 12 hours 5–14 9 1.5 g to 3 g every 24 hours When only serum creatinine is available, the following formula (based on sex, weight, and age of the patient) may be used to convert this value into creatinine clearance.

The serum creatinine should represent a steady state of renal function. Males Weight (kg) x (140 – age) 72 x serum creatinine Females 0.85 x above value

⛔ Contraindications 50 words ▾

CONTRAINDICATIONS The use of UNASYN is contraindicated in individuals with a history of serious hypersensitivity reactions (e.g., anaphylaxis or Stevens-Johnson syndrome) to ampicillin, sulbactam or to other beta-lactam antibacterial drugs (e.g., penicillins and cephalosporins). UNASYN is contraindicated in patients with a previous history of cholestatic jaundice/hepatic dysfunction associated with UNASYN.

⚠️ Warnings ~2 min read ▾

WARNINGS Hypersensitivity Serious and occasionally fatal hypersensitivity (anaphylactic) reactions have been reported in patients on penicillin therapy. These reactions are more apt to occur in individuals with a history of penicillin hypersensitivity and/or hypersensitivity reactions to multiple allergens. There have been reports of individuals with a history of penicillin hypersensitivity who have experienced severe reactions when treated with cephalosporins.

Before therapy with a penicillin, careful inquiry should be made concerning previous hypersensitivity reactions to penicillins, cephalosporins, and other allergens. If an allergic reaction occurs, UNASYN should be discontinued and the appropriate therapy instituted. Hepatotoxicity Hepatic dysfunction, including hepatitis and cholestatic jaundice has been associated with the use of UNASYN.

Hepatic toxicity is usually reversible; however, deaths have been reported. Hepatic function should be monitored at regular intervals in patients with hepatic impairment. Severe Cutaneous Adverse Reactions UNASYN may cause severe skin reactions, such as toxic epidermal necrolysis (TEN), Stevens-Johnson syndrome (SJS), drug reaction with eosinophilia and systemic symptoms (DRESS), dermatitis exfoliative, erythema multiforme, and Acute generalized exanthematous pustulosis (AGEP).

If patients develop a skin rash they should be monitored closely and UNASYN discontinued if lesions progress (see CONTRAINDICATIONS and ADVERSE REACTIONS sections). Clostridioides difficile -Associated Diarrhea Clostridioides difficile -associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including UNASYN, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile .

C. difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibacterial drug use.

Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents. If CDAD is suspected or confirmed, ongoing antibacterial drug use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibacterial treatment of C. difficile , and surgical evaluation should be instituted as clinically indicated.

🤒 Adverse Reactions ~2 min read ▾

ADVERSE REACTIONS Adult Patients UNASYN is generally well tolerated. The following adverse reactions have been reported in clinical trials. Local Adverse Reactions Pain at IM injection site – 16% Pain at IV injection site – 3% Thrombophlebitis – 3% Phlebitis – 1.2% Systemic Adverse Reactions The most frequently reported adverse reactions were diarrhea in 3% of the patients and rash in less than 2% of the patients.

Additional systemic reactions reported in less than 1% of the patients were: itching, nausea, vomiting, candidiasis, fatigue, malaise, headache, chest pain, flatulence, abdominal distension, glossitis, urine retention, dysuria, edema, facial swelling, erythema, chills, tightness in throat, substernal pain, epistaxis and mucosal bleeding. Pediatric Patients Available safety data for pediatric patients treated with UNASYN demonstrate a similar adverse events profile to those observed in adult patients. Additionally, atypical lymphocytosis has been observed in one pediatric patient receiving UNASYN.

Adverse Laboratory Changes Adverse laboratory changes without regard to drug relationship that were reported during clinical trials were: Hepatic: Increased AST (SGOT), ALT (SGPT), alkaline phosphatase, and LDH. Hematologic: Decreased hemoglobin, hematocrit, RBC, WBC, neutrophils, lymphocytes, platelets and increased lymphocytes, monocytes, basophils, eosinophils, and platelets. Blood Chemistry: Decreased serum albumin and total proteins.

Renal: Increased BUN and creatinine. Urinalysis: Presence of RBC's and hyaline casts in urine. Post-marketing Experience In addition to adverse reactions reported from clinical trials, the following have been identified during post-marketing use of ampicillin sodium and sulbactam sodium or other products containing ampicillin.

Because they are reported voluntarily from a population of unknown size, estimates of frequency cannot be made. These events have been chosen for inclusion due to a combination of their seriousness, frequency, or potential causal connection to ampicillin sodium and sulbactam sodium. Infections and Infestations: Clostridioides difficile -associated diarrhea (see WARNINGS section).

Blood and Lymphatic System Disorders Hemolytic anemia, thrombocytopenic purpura, and agranulocytosis have been reported. These reactions are usually reversible on discontinuation of therapy and are believed to be hypersensitivity phenomena. Some individuals have developed positive direct Coombs Tests during treatment with UNASYN, as with other beta-lactam antibacterials.

Gastrointestinal Disorders: Abdominal pain, cholestatic hepatitis, cholestasis, hyperbilirubinemia, jaundice, abnormal hepatic function, melena, gastritis, stomatitis, dyspepsia, and black "hairy" tongue (see CONTRAINDICATIONS and WARNINGS sections). General Disorders and Administration Site Conditions: Injection site reaction Immune System Disorders: Serious and fatal hypersensitivity (anaphylactic) reactions (see WARNINGS section), Acute myocardial ischemia with or without myocardial infarction may occur as part of an allergic reaction.

Metabolism and Nutrition Disorders: Hypokalemia Nervous System Disorders: Convulsion and dizziness Renal and Urinary Disorders: Tubulointerstitial nephritis Musculoskeletal and Connective Tissue Disorders: Arthralgia Respiratory, Thoracic and Mediastinal Disorders: Dyspnea Skin and Subcutaneous Tissue Disorders: Toxic epidermal necrolysis, Stevens-Johnson syndrome, drug reaction with eosinophilia and systemic symptoms (DRESS), angioedema, Acute generalized exanthematous pustulosis (AGEP), erythema multiforme, exfoliative dermatitis, urticaria (see CONTRAINDICATIONS and WARNINGS sections), and linear IgA bullous dermatosis.

🔄 Drug Interactions 108 words ▾

Drug Interactions Probenecid decreases the renal tubular secretion of ampicillin and sulbactam. Concurrent use of probenecid with UNASYN may result in increased and prolonged blood levels of ampicillin and sulbactam. The concurrent administration of allopurinol and ampicillin increases substantially the incidence of rashes in patients receiving both drugs as compared to patients receiving ampicillin alone.

It is not known whether this potentiation of ampicillin rashes is due to allopurinol or the hyperuricemia present in these patients. There are no data with UNASYN and allopurinol administered concurrently. UNASYN and aminoglycosides should not be reconstituted together due to the in vitro inactivation of aminoglycosides by the ampicillin component of UNASYN.

🔄 Drug / Laboratory Test Interactions 92 words ▾

Drug/Laboratory Test Interactions Administration of UNASYN will result in high urine concentration of ampicillin. High urine concentrations of ampicillin may result in false positive reactions when testing for the presence of glucose in urine using Clinitest™, Benedict's Solution or Fehling's Solution. It is recommended that glucose tests based on enzymatic glucose oxidase reactions (such as Clinistix™ or Testape™) be used.

Following administration of ampicillin to pregnant women, a transient decrease in plasma concentration of total conjugated estriol, estriol-glucuronide, conjugated estrone and estradiol has been noted. This effect may also occur with UNASYN.

🤰 Pregnancy 75 words ▾

Pregnancy Reproduction studies have been performed in mice, rats, and rabbits at doses up to ten (10) times the human dose and have revealed no evidence of impaired fertility or harm to the fetus due to UNASYN. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.

(see PRECAUTIONS-Drug/Laboratory Test Interactions section).

🧒 Pediatric Use 102 words ▾

Pediatric Use The safety and effectiveness of UNASYN have been established for pediatric patients one year of age and older for skin and skin structure infections as approved in adults. Use of UNASYN in pediatric patients is supported by evidence from adequate and well-controlled studies in adults with additional data from pediatric pharmacokinetic studies, a controlled clinical trial conducted in pediatric patients and post-marketing adverse events surveillance. (see CLINICAL PHARMACOLOGY , INDICATIONS AND USAGE , ADVERSE REACTIONS , DOSAGE AND ADMINISTRATION , and CLINICAL STUDIES sections).

The safety and effectiveness of UNASYN have not been established for pediatric patients for intra-abdominal infections.

🆘 Overdosage 47 words ▾

OVERDOSAGE Neurological adverse reactions, including convulsions, may occur with the attainment of high CSF levels of beta-lactams. Ampicillin may be removed from circulation by hemodialysis. The molecular weight, degree of protein binding and pharmacokinetics profile of sulbactam suggest that this compound may also be removed by hemodialysis.

🧬 Clinical Pharmacology ~3 min read ▾

CLINICAL PHARMACOLOGY General Immediately after completion of a 15-minute intravenous infusion of UNASYN, peak serum concentrations of ampicillin and sulbactam are attained. Ampicillin serum levels are similar to those produced by the administration of equivalent amounts of ampicillin alone. Peak ampicillin serum levels ranging from 109 to 150 mcg/mL are attained after administration of 2000 mg of ampicillin plus 1000 mg sulbactam and 40 to 71 mcg/mL after administration of 1000 mg ampicillin plus 500 mg sulbactam.

The corresponding mean peak serum levels for sulbactam range from 48 to 88 mcg/mL and 21 to 40 mcg/mL, respectively. After an intramuscular injection of 1000 mg ampicillin plus 500 mg sulbactam, peak ampicillin serum levels ranging from 8 to 37 mcg/mL and peak sulbactam serum levels ranging from 6 to 24 mcg/mL are attained. The mean serum half-life of both drugs is approximately 1 hour in healthy volunteers.

Approximately 75 to 85% of both ampicillin and sulbactam are excreted unchanged in the urine during the first 8 hours after administration of UNASYN to individuals with normal renal function. Somewhat higher and more prolonged serum levels of ampicillin and sulbactam can be achieved with the concurrent administration of probenecid. In patients with impaired renal function the elimination kinetics of ampicillin and sulbactam are similarly affected, hence the ratio of one to the other will remain constant whatever the renal function.

The dose of UNASYN in such patients should be administered less frequently in accordance with the usual practice for ampicillin (see DOSAGE AND ADMINISTRATION section). Ampicillin has been found to be approximately 28% reversibly bound to human serum protein and sulbactam approximately 38% reversibly bound. The following average levels of ampicillin and sulbactam were measured in the tissues and fluids listed: TABLE 1 Concentration of UNASYN in Various Body Tissues and Fluids Fluid or Tissue Dose (grams) Ampicillin/Sulbactam Concentration (mcg/mL or mcg/g) Ampicillin/Sulbactam Peritoneal Fluid 0.5/0.5 IV 7/14 Blister Fluid (Cantharides) 0.5/0.5 IV 8/20 Tissue Fluid 1/0.5 IV 8/4 Intestinal Mucosa 0.5/0.5 IV 11/18 Appendix 2/1 IV 3/40 Penetration of both ampicillin and sulbactam into cerebrospinal fluid in the presence of inflamed meninges has been demonstrated after IV administration of UNASYN.

The pharmacokinetics of ampicillin and sulbactam in pediatric patients receiving UNASYN are similar to those observed in adults. Immediately after a 15-minute infusion of 50 to 75 mg UNASYN/kg body weight, peak serum and plasma concentrations of 82 to 446 mcg ampicillin/mL and 44 to 203 mcg sulbactam/mL were obtained. Mean half-life values were approximately 1 hour.

MICROBIOLOGY Mechanism of Action Ampicillin is similar to benzyl penicillin in its bactericidal action against susceptible organisms during the stage of active multiplication. It acts through the inhibition of cell wall mucopeptide biosynthesis. Ampicillin has a broad spectrum of bactericidal activity against many gram-positive and gram-negative aerobic and anaerobic bacteria.

(Ampicillin is, however, degraded by beta-lactamases and therefore the spectrum of activity does not normally include organisms which produce these enzymes). A wide range of beta-lactamases found in microorganisms resistant to penicillins and cephalosporins have been shown in biochemical studies with cell free bacterial systems to be irreversibly inhibited by sulbactam. Although sulbactam alone possesses little useful antibacterial activity except against the Neisseriaceae , whole organism studies have shown that sulbactam restores ampicillin activity against beta-lactamase producing strains.

In particular, sulbactam has good inhibitory activity against the clinically important plasmid mediated beta-lactamases most frequently responsible for transferred drug resistance. Sulbactam has no effect on the activity of ampicillin against ampicillin-susceptible strains… [Excerpted — this section continues on DailyMed.]

📦 How Supplied / Storage and Handling 217 words ▾

HOW SUPPLIED UNASYN (ampicillin and sulbactam) for injection, USP, a sterile off-white dry powder, is available in Pharmacy Bulk Package: Vials containing 15 g (ampicillin 10 g and sulbactam 5 g) NDC 0049-0024-28 (contains one of NDC 0049-0024-28). Vials containing 15 g (ampicillin 10 g and sulbactam 5 g) NDC 0049-1515-02 (contains one of NDC 0049-1515-01). UNASYN sterile powder is to be stored at or below 30°C (86°F) prior to reconstitution.

OTHER SIZE PACKAGES AVAILABLE UNASYN is also supplied in glass vial in the following package sizes: Carton of 10 single-dose vials containing 1.5 g (ampicillin 1 g and sulbactam 0.5 g) NDC 0049-0013-83 (10 of NDC 0049-0013-81). Carton of 10 single-dose vials containing 1.5 g (ampicillin 1 g and sulbactam 0.5 g) NDC 0049-0710-10 (10 of NDC 0049-0710-01). Carton of 10 single-dose vials containing 3 g (ampicillin 2 g and sulbactam 1 g) NDC 0049-0014-83 (10 of NDC 0049-0014-81).

Carton of 10 single-dose vials containing 3 g (ampicillin 2 g and sulbactam 1 g) NDC 0049-3003-10 (10 of NDC 0049-3003-01). To report SUSPECTED ADVERSE REACTIONS, contact Pfizer Inc. at 1-800-438-1985 or FDA at 1-800-FDA-1088 or http://www.fda.gov/ for voluntary reporting of adverse reactions. This product's labeling may have been updated.

For the most recent prescribing information, please visit www.pfizer.com . Rx only LAB-0018-26.0 Revised November 2025 Logo

📦 Storage and Handling 15 words ▾

UNASYN sterile powder is to be stored at or below 30°C (86°F) prior to reconstitution.

📋 Description ~1 min read ▾

DESCRIPTION UNASYN (ampicillin and sulbactam) for injection, USP is a sterile antibacterial fixed-combination drug product consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration. Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate and has a molecular weight of 371.39.

Its chemical formula is C 16 H 18 N 3 NaO 4 S. The structural formula is: Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate 4,4-dioxide.

Its chemical formula is C 8 H 10 NNaO 5 S with a molecular weight of 255.22. The structural formula is: UNASYN is available as a white to off-white dry powder for reconstitution. UNASYN dry powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions.

The pH of the solutions is between 8.0 and 10.0. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same.

UNASYN pharmacy bulk package is a vial containing a sterile preparation for parenteral use. The Pharmacy Bulk Package is for use in a pharmacy admixture setting; it provides many single doses of UNASYN for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (see DIRECTIONS FOR USE–Directions for Proper Use of Pharmacy Bulk Package section). Each 15 g vial contains ampicillin 10 g and sulbactam 5 g (equivalent to 10.627 g ampicillin sodium and 5.470 g sulbactam sodium).

Each 1.5 g of UNASYN contains approximately 115 mg of sodium. Chemical Structure Chemical Structure

💬 Information for Patients 173 words ▾

Information for Patients Patients should be counseled that antibacterial drugs including UNASYN should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When UNASYN is prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed.

Skipping doses or not completing the full course of therapy may (1) decrease the effectiveness of the immediate treatment and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by UNASYN or other antibacterial drugs in the future. Diarrhea is a common problem caused by antibacterials which usually ends when the antibacterial is discontinued. Sometimes after starting treatment with antibacterials, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibacterial.

If this occurs, patients should contact their physician as soon as possible.

⚠️ Precautions ~3 min read ▾

PRECAUTIONS General A high percentage of patients with mononucleosis who receive ampicillin develop a skin rash. Thus, ampicillin class antibacterials should not be administered to patients with mononucleosis. In patients treated with UNASYN the possibility of superinfections with mycotic or bacterial pathogens should be kept in mind during therapy.

If superinfections occur (usually involving Pseudomonas or Candida ), the drug should be discontinued and/or appropriate therapy instituted. Prescribing UNASYN in the absence of proven or strongly suspected bacterial infection or a prophylactic indication is unlikely to provide benefit to the patient and increases the risk of the development of drug-resistant bacteria. Information for Patients Patients should be counseled that antibacterial drugs including UNASYN should only be used to treat bacterial infections.

They do not treat viral infections (e.g., the common cold). When UNASYN is prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed. Skipping doses or not completing the full course of therapy may (1) decrease the effectiveness of the immediate treatment and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by UNASYN or other antibacterial drugs in the future.

Diarrhea is a common problem caused by antibacterials which usually ends when the antibacterial is discontinued. Sometimes after starting treatment with antibacterials, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibacterial. If this occurs, patients should contact their physician as soon as possible.

Drug Interactions Probenecid decreases the renal tubular secretion of ampicillin and sulbactam. Concurrent use of probenecid with UNASYN may result in increased and prolonged blood levels of ampicillin and sulbactam. The concurrent administration of allopurinol and ampicillin increases substantially the incidence of rashes in patients receiving both drugs as compared to patients receiving ampicillin alone.

It is not known whether this potentiation of ampicillin rashes is due to allopurinol or the hyperuricemia present in these patients. There are no data with UNASYN and allopurinol administered concurrently. UNASYN and aminoglycosides should not be reconstituted together due to the in vitro inactivation of aminoglycosides by the ampicillin component of UNASYN.

Drug/Laboratory Test Interactions Administration of UNASYN will result in high urine concentration of ampicillin. High urine concentrations of ampicillin may result in false positive reactions when testing for the presence of glucose in urine using Clinitest™, Benedict's Solution or Fehling's Solution. It is recommended that glucose tests based on enzymatic glucose oxidase reactions (such as Clinistix™ or Testape™) be used.

Following administration of ampicillin to pregnant women, a transient decrease in plasma concentration of total conjugated estriol, estriol-glucuronide, conjugated estrone and estradiol has been noted. This effect may also occur with UNASYN. Carcinogenesis, Mutagenesis, Impairment of Fertility Long-term studies in animals have not been performed to evaluate carcinogenic or mutagenic potential.

Pregnancy Reproduction studies have been performed in mice, rats, and rabbits at doses up to ten (10) times the human dose and have revealed no evidence of impaired fertility or harm to the fetus due to UNASYN. There are, however, no adequate and well-controlled studies in pregnant women. Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.

(see PRECAUTIONS-Drug/Laboratory Test Interactions section). Labor and Delivery Studies in guinea pigs have shown that intravenous… [Excerpted — this section continues on DailyMed.]

🍼 Nursing Mothers 26 words ▾

Nursing Mothers Low concentrations of ampicillin and sulbactam are excreted in the milk; therefore, caution should be exercised when UNASYN is administered to a nursing woman.

🔬 Clinical Studies 207 words ▾

CLINICAL STUDIES Skin and Skin Structure Infections in Pediatric Patients Data from a controlled clinical trial conducted in pediatric patients provided evidence supporting the safety and efficacy of UNASYN for the treatment of skin and skin structure infections. Of 99 pediatric patients evaluable for clinical efficacy, 60 patients received a regimen containing intravenous UNASYN, and 39 patients received a regimen containing intravenous cefuroxime. This trial demonstrated similar outcomes (assessed at an appropriate interval after discontinuation of all antimicrobial therapy) for UNASYN- and cefuroxime-treated patients: TABLE 2 Therapeutic Regimen Clinical Success Clinical Failure UNASYN 51/60 (85%) 9/60 (15%) Cefuroxime 34/39 (87%) 5/39 (13%) Most patients received a course of oral antimicrobials following initial treatment with intravenous administration of parenteral antimicrobials.

The study protocol required that the following three criteria be met prior to transition from intravenous to oral antimicrobial therapy: (1) receipt of a minimum of 72 hours of intravenous therapy; (2) no documented fever for prior 24 hours; and (3) improvement or resolution of the signs and symptoms of infection. The choice of oral antimicrobial agent used in this trial was determined by susceptibility testing of the original pathogen, if isolated, to oral agents available. The course of oral antimicrobial therapy should not routinely exceed 14 days.

📄 Carcinogenesis, Mutagenesis, Impairment of Fertility 19 words ▾

Carcinogenesis, Mutagenesis, Impairment of Fertility Long-term studies in animals have not been performed to evaluate carcinogenic or mutagenic potential.

📄 Package Label / Principal Display Panel 182 words ▾

PRINCIPAL DISPLAY PANEL - 15 g Bulk Vial Label Pfizer NDC 0049-0024-28 Rx only Unasyn ® (ampicillin sodium/ sulbactam sodium) 15 g* Sterile For Intravenous Use PHARMACY BULK PACKAGE NOT FOR DIRECT INFUSION PRINCIPAL DISPLAY PANEL - 15 g Bulk Vial Label

PRINCIPAL DISPLAY PANEL - 15 g Bulk Carton NDC 0049-0024-28 Rx only 1 Bottle Unasyn ® (ampicillin sodium/ sulbactam sodium) 15 g* PHARMACY BULK PACKAGE NOT FOR DIRECT INFUSION Sterile For Intravenous Use Pfizer PRINCIPAL DISPLAY PANEL - 15 g Bulk Carton

PRINCIPAL DISPLAY PANEL - 15 g Bulk Vial ampicillin and sulbactam Pfizer NDC 0049-1515-01 Sterile Unasyn ® (ampicillin and sulbactam) for injection, USP 15 g* For Intravenous Use PHARMACY BULK PACKAGE NOT FOR DIRECT INFUSION Rx only PRINCIPAL DISPLAY PANEL - 15 g Bulk Vial ampicillin and sulbactam

PRINCIPAL DISPLAY PANEL - 15 g Bulk Carton ampicillin and sulbactam NDC 0049-1515-02 Sterile 1 Vial Unasyn ® (ampicillin and sulbactam) for injection, USP 15 g* PHARMACY BULK PACKAGE NOT FOR DIRECT INFUSION For Intravenous Use Pfizer Rx only PRINCIPAL DISPLAY PANEL - 15 g Bulk Carton ampicillin and sulbactam

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗

Medicare Part D spend CMS · PART D · 2026 (Q1)

Medicare Part D (outpatient prescription) spending for Unasyn — the program that covers self-administered drugs. 1 manufacturer.
⚠️ Drug-level data: CMS publishes Part D spending by drug, not by NDC — these figures combine every manufacturer, strength and package size sold under the name Unasyn. That’s a different level of aggregation than the Medicaid card above, which is specific to this exact 11-digit NDC (pack size included), so the two aren’t directly comparable.
Period
Total Part D spend
$9.9K
Claims incl. refills
39
Beneficiaries
13
Spend / beneficiary
$758.83
Spend / claim
$252.94
Trend by period
💵 About the dollar figures: spending is what Part D plans paid before confidential manufacturer rebates, so the program’s real net cost is lower. A blank patient count means fewer than 11 people — CMS hides counts that small to protect privacy. Source: CMS Medicare Quarterly Part D Spending by Drug (data.cms.gov), updated quarterly.

Reported adverse events (FAERS)

Read carefully: FAERS reports are voluntary and unverified. Counts are not incidence, do not establish causation, are subject to reporting bias, and cannot be used to compare one drug to another. Shown for signal context only. Reports for UNASYN (this brand).

Top reported reactions

Pneumonia144
Pyrexia129
Dyspnoea88
Diarrhoea80
Pain77
Rash74
Vomiting64

Reporter sex

1,692 reports
Male · 50%
Female · 50%
Unknown · 0%

Serious outcomes

Death333
Disabling59
Reports over time (by year) — tap or hover for the count & year
2019 2021 2023 2026 68 0
Most recent year is provisional (FAERS lags ~3 months).
Where does this data come from?
Adverse-event reports from the FDA Adverse Event Reporting System (FAERS) via openFDA. FAERS reports are voluntary and unverified — counts are not incidence and don’t establish causation.

About this NDC listing & data coverage

Finished prescription product No longer marketed (per FDA listing data)
What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos — Not published for this NDC No photo available yet for this listing.
Inactive ingredients (structured) — Not published for this NDC The labeler did not submit a structured excipient list, or no SPL is available.
NADAC pharmacy acquisition price (CMS) — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey.
Orange Book / therapeutic-equivalence data ✓ Available
HCPCS J-code billing crosswalk ✓ Available
Medicaid utilization (CMS SDUD) — Not published for this NDC CMS reports utilization only for NDCs with Medicaid claims above its privacy threshold.
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Why is there no price listed?
The pricing shown on our NDC pages comes from CMS NADAC, a voluntary survey of retail community pharmacy invoices. CMS does not publish a NADAC for every NDC — packages outside the retail survey (institutional and hospital products, bulk packages, discontinued items, and many OTC items) may never receive one. A missing price reflects the survey's scope, not this product's actual cost, and does not mean the product is free or unavailable.
What does the discontinued status mean for this NDC?
The labeler reported a marketing end date (or the listing was delisted), so this specific package is no longer actively marketed. Remaining stock may still be dispensed for a time, and the NDC stays valid for historical records and claims — but data feeds (pricing, labeling) typically stop updating for it. Other package sizes or other manufacturers' versions of the same medication may still be marketed — see the equivalents section where available.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The form printed on the packaging and shown on DailyMed is the one the FDA registered. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero and the dashes are dropped. The Identity section at the top of this page lists each form of this code.
Who lists this product with the FDA?
Roerig is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
Does this product have a billing J-code?
Yes — this NDC cross-references HCPCS code J0295 for medical-claim billing (typically used when a product is administered in a clinical setting rather than dispensed at a retail pharmacy). See the Billing section on this page.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.