HomeNDC LookupIngredientsCefazolin › 60505-6143-04
Cefazolin 10 g Injection, Powder, For Solution, 10 vials — NDC 60505-6143-04 package photo

Cefazolin 10 g Injection, Powder, For Solution, 10 vials

by Apotex Corp. · 10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (60505-6143-4) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (60505-6143-0)
NDC 60505-6143-04
🏷️ FDA NDC (as labeled) 60505-6143-4 billing pads the package segment with a zero
Rx only Generic On market Non-controlled
🗂️ Data synced Jul 24, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →
⚠️
Other active recalls for Cefazolin (different manufacturers) — 1 · tap to view
These affect other manufacturers’ products for the same ingredient — not necessarily the exact NDC on this page.
Class I · Jun 27, 2025 — Labeling: Label Mix-Up; cartons of Cefazolin for Injection, USP 1 gram were found to contain vials labeled as penicillin G potassium for Injection, USP, 20 million Unit. The vials contained Cefozalin (Sandoz Inc) · FDA recall D-0569-2025
Each entry is an official FDA enforcement report — look up any recall number in the FDA recall database ↗

🆔 Identity & classification

FDA NDC (as labeled) 60505-6143-4
Product NDC 60505-6143
11-digit billing NDC 60505614304
NCPDP billing unit EA — each (per item)
RxCUI 313920
UNII P380M0454Z
UPC 0360505614301
Application # ANDA209217
SPL Set ID 81d1783a-2baa-4d65-856a-f5ce38d24804
Established class (EPC) Cephalosporin Antibacterial
Chemical class Cephalosporins
DEA schedule Non-controlled
Marketing category ANDA
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 2019-03-28
Route INTRAVENOUS
Dosage form INJECTION, POWDER, FOR SOLUTION
Substance CEFAZOLIN SODIUM
GPI-14 02100015102125
GPI class ceFAZolin Sodium
GCN Seq No 064591
GCN 15558
HICL code 003976
Ingredient (HICL) Cefazolin Sodium
HIC1 code W
Therapeutic class — broad (HIC1) Anti-Infecting Agents
HIC2 code W1
Therapeutic class — intermediate (HIC2) Antibiotics
HIC3 code W1W
Therapeutic class — specific (HIC3) Cephalosporin Antibiotics - 1St Generation
AHFS code 08:12.06.04
AHFS class 1St Generation Cephalosporin Antibiotics
FDB label name CEFAZOLIN 10 GM VIAL
FDB brand name Cefazolin Sodium
Legend status F — Federal legend — prescription drug or device
TE code (Orange Book) AP · RLD · RS
Why two NDCs? The FDA registers this code as 60505-6143-4 — a 5-4-1 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the package segment → 60505-6143-04. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Cephalosporin Antibacterial class.

Pharmacologic class Cephalosporin Antibacterial
Drug family (ATC) First-generation cephalosporins
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerApotex Corp.
Application holderQILU ANTIBIOTICS PHARMACEUTICAL CO LTD
FDA applicationANDA209217 (ANDA)
Labeler code60505
First marketedMar 2019
Product typeHuman Prescription Drug
Portfolio306 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Label name CEFAZOLIN 10 GM VIAL Ingredient Cefazolin Sodium
📖 What it is MedlinePlus · NLM

Cefazolin injection is used to treat certain infections caused by bacteria. Cefazolin injection also may be used around the time of surgery in order to prevent the patient from getting an infection. Cefazolin injection is in a class of medications called cephalosporin antibiotics. It works by killing bacteria. Antibiotics such as cefazolin injection will not work for colds, flu, or other viral infections. Taking antibiotics when they are not needed may cause them not to work later when you do have an infection from bacteria.

Read the full MedlinePlus article ↗
📗 Our plain-language guide HelloPharmacist
  • Cefazolin treats a wide range of serious bacterial infections — things like pneumonia, urinary tract infections, skin infections, bone and joint infections, and even bloodstream in...
  • What kinds of infections does cefazolin treat?
  • No, cefazolin only comes as an injection. It's either given directly into a vein (IV) or into a muscle (IM), depending on the product being used. A nurse or other healthcare profes...
  • How will I receive cefazolin — do I take a pill?
📖 Read our full Cefazolin guide →
7
Nutrient depletion considerations

Cefazolin may be associated with lower levels of 7 nutrients — worth a chat with your pharmacist, not a cause for alarm.

An association is not a deficiency. Educational only — don't start or stop anything without professional guidance.
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

A current SPL was checked, but it does not contain a structured or narrative inactive-ingredient list for this product. This does not mean the product has no inactive ingredients.
Where does this data come from?
Source: official FDA Structured Product Labeling (SPL) via DailyMed and the openFDA label index. Structured IACT rows and label-wide narrative are kept separate; availability and product-level specificity depend on the submitted label.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer mLPer package
Retail pharmacies payNADAC · weekly Not in the retail survey — common for institutional, discontinued, or low-volume packs.
Medicaid paysCMS SDUD · 12 mo $14.82
Medicare drug plans payPart D · Q2 2026 $9.33
Medicare Part B allowsASP · J0690 $0.796 / J0690 unit
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🧾 Billing & reimbursement

FDA NDC (as labeled)60505-6143-4
11-digit billing NDC60505-6143-04
Format5-4-1 as registered → padded to 5-4-2 for billing (zero added to the package segment)
HCPCS J-codeJ0690
DescriptorINJECTION, CEFAZOLIN SODIUM, 500 MG
Billing units / pkg20 units
Crosswalk sourcePDAC NDC-HCPCS crosswalk (DME MAC / DMEPOS)
Where does this data come from?
The HCPCS J-code crosswalk comes from the CMS ASP NDC-HCPCS crosswalk and the DMEPDAC (DME MAC) NDC-HCPCS crosswalk — free public CMS data. Billing units are derived from the code’s descriptor and the package amount.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Cefazolin 10 g 00143-9261-10 Hikma 10 vials AP FDA listed
Cefazolin 20 g 00143-9665-10 Hikma 1 injection AP FDA listed
Cefazolin 10 g 00143-9983-03 Hikma 10 vials AP FDA listed
Cefazolin 10 g 00781-3452-95 Sandoz 10 vials AP FDA listed
Cefazolin 10 g 44567-0708-10 WG 10 vials FDA listed
Cefazolin 10 gthis 60505-6143-04 Apotex 10 vials AP FDA listed
Cefazolin 10 g 60505-6244-04 Apotex 10 vials AP FDA listed
Cefazolin 10 g 63323-0238-61 Fresenius 10 vials FDA listed
Cefazolin 100 g 66288-1100-01 Samson 1 injection FDA listed
Cefazolin 300 g 66288-1300-01 Samson 1 injection FDA listed
Cefazolin 10 g 72572-0056-10 Civica, 10 vials AP FDA listed
About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

Availability & generic status

🏛️
2019
On the market since
Mar 2019
📍
2026
Currently FDA-listed
7 years listed
🔓
·
Generic on the market
this product is a generic
This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

🗺️ Medicaid utilization & spend

📍 This exact package only: Medicaid data is reported per full 11-digit NDC — labeler, product and pack size — so every number here is for 60505-6143-04, not the drug overall. Other pack sizes report separately.
💊 Pharmacy benefit only: These are Medicaid outpatient pharmacy claims, billed by NDC. They exclude the medical benefit — clinic- or hospital-administered drugs billed under HCPCS J-codes — so drugs used mostly that way (e.g. Avastin, Lucentis, Keytruda) can look low or missing here. That’s expected, not an error.
📅 Q1 2025 – Q4 2025 · 4 quarters of data
ⓘ The newest quarter is usually incomplete when first published; states restate recent quarters in later CMS releases, so the latest figures typically revise upward. State coverage-policy changes can also shift quarter-to-quarter totals.
Prescriptions last 4 qtrs
8.9K
Units reimbursed last 4 qtrs
34.4K
Gross reimbursed last 4 qtrs
$510.3K
Avg / prescription
$57.41
Avg / unit
$14.8221
Latest quarter Q4 2025
2.1KRx
Fee-for-service vs managed care
48% FFS 52% MCO
Fee-for-service · 4,250 Rx Managed care · 4,638 Rx
State Medicaid map
Alaska: 104 units · 14.2 per 100k residents AK Maine: no data reported ME Washington: 2,418 units · 31.0 per 100k residents WA Idaho: 231 units · 11.8 per 100k residents ID Montana: no data reported MT North Dakota: no data reported ND Minnesota: 101 units · 1.8 per 100k residents MN Wisconsin: 59 units · 1.0 per 100k residents WI Michigan: 848 units · 8.4 per 100k residents MI New York: 2,731 units · 14.0 per 100k residents NY Vermont: no data reported VT New Hampshire: no data reported NH Oregon: 313 units · 7.4 per 100k residents OR Nevada: 524 units · 16.4 per 100k residents NV Wyoming: 71 units · 12.2 per 100k residents WY South Dakota: no data reported SD Iowa: no data reported IA Illinois: 526 units · 4.2 per 100k residents IL Indiana: 115 units · 1.7 per 100k residents IN Ohio: 1,408 units · 11.9 per 100k residents OH Pennsylvania: 334 units · 2.6 per 100k residents PA New Jersey: 504 units · 5.4 per 100k residents NJ Massachusetts: 92 units · 1.3 per 100k residents MA California: 4,919 units · 12.6 per 100k residents CA Utah: 42 units · 1.2 per 100k residents UT Colorado: 1,325 units · 22.5 per 100k residents CO Nebraska: 814 units · 41.2 per 100k residents NE Missouri: 99 units · 1.6 per 100k residents MO Kentucky: 436 units · 9.6 per 100k residents KY West Virginia: no data reported WV Virginia: 384 units · 4.4 per 100k residents VA Maryland: 24 units · 0.4 per 100k residents MD Connecticut: 663 units · 18.3 per 100k residents CT Rhode Island: 722 units · 65.9 per 100k residents RI Arizona: 797 units · 10.7 per 100k residents AZ New Mexico: 239 units · 11.3 per 100k residents NM Kansas: no data reported KS Arkansas: 274 units · 8.9 per 100k residents AR Tennessee: 154 units · 2.2 per 100k residents TN North Carolina: 9,660 units · 89.2 per 100k residents NC South Carolina: 35 units · 0.7 per 100k residents SC Delaware: 131 units · 12.7 per 100k residents DE Oklahoma: 1,451 units · 35.8 per 100k residents OK Louisiana: no data reported LA Mississippi: 66 units · 2.2 per 100k residents MS Alabama: no data reported AL Georgia: 49 units · 0.4 per 100k residents GA D.C.: 60 units · 8.8 per 100k residents DC Hawaii: no data reported HI Texas: 1,393 units · 4.6 per 100k residents TX Florida: 310 units · 1.4 per 100k residents FL
Units reimbursed · per 100k residents
0.489.2
gray = no data reported
Colors are per 100,000 residents, so big states don’t automatically dominate. Tap or hover a state for its actual totals.
Tap or hover a state
…for its Medicaid breakdown
🏆 Top states by units · per 100k residents
1 North Carolina 89.2 /100k
2 Rhode Island 65.9 /100k
3 Nebraska 41.2 /100k
4 Oklahoma 35.8 /100k
5 Washington 31.0 /100k
6 Colorado 22.5 /100k
7 Connecticut 18.3 /100k
8 Nevada 16.4 /100k
National units — by quarter
💵 About the dollar figures: “reimbursed” is what Medicaid paid pharmacies before confidential manufacturer rebates, so the program’s real net cost is lower than these numbers. Fee-for-service and managed-care claims are combined unless split above. Source: CMS State Drug Utilization Data; per-100k rates use 2023 Census population estimates.

🔬 Reported adverse events (FAERS)

Read carefully: FAERS reports are voluntary and unverified. Counts are not incidence, do not establish causation, are subject to reporting bias, and cannot be used to compare one drug to another. Shown for signal context only. Reports for Cefazolin — the ingredient across all brands.

Top reported reactions

Hypotension702
Anaphylactic Reaction644
Anaphylactic Shock601
Rash592
Pyrexia512
Renal Failure488
Acute Kidney Injury432

Age at onset

Neonate111
Infant24
Child83
Adolescent59
Adult997
Elderly653

Reporter sex

11,986 reports
Male · 51%
Female · 49%
Unknown · 0%

Serious outcomes

Hospitalization6,061
Life-threatening2,101
Death1,387
Disabling302
Reports over time (by year) — tap or hover for the count & year
2019 2021 2023 2026 1,008 0
Most recent year is provisional (FAERS lags ~3 months).
Where does this data come from?
Adverse-event reports from the FDA Adverse Event Reporting System (FAERS) via openFDA. FAERS reports are voluntary and unverified — counts are not incidence and don’t establish causation.

📦 Packaging — all sizes for this product

Package NDCDescription Marketing startStatus
60505-6143-04 You're viewing this 10 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (60505-6143-4) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, PHARMACY BULK PACKAGE (60505-6143-0) 2019-03-28 Active

🧭 About this NDC listing & data coverage

Finished prescription product
What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos ✓ Available
Inactive ingredients (structured) — Not published for this NDC The labeler did not submit a structured excipient list, or no SPL is available.
NADAC pharmacy acquisition price (CMS) — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey.
Orange Book / therapeutic-equivalence data ✓ Available
HCPCS J-code billing crosswalk ✓ Available
Medicaid utilization (CMS SDUD) ✓ Available
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Why is there no price listed?
The pricing shown on our NDC pages comes from CMS NADAC, a voluntary survey of retail community pharmacy invoices. CMS does not publish a NADAC for every NDC — packages outside the retail survey (institutional and hospital products, bulk packages, discontinued items, and many OTC items) may never receive one. A missing price reflects the survey's scope, not this product's actual cost, and does not mean the product is free or unavailable.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The FDA registers it as 60505-6143-4, which is what is printed on the packaging and shown on DailyMed. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero: 60505-6143-04, written without dashes as 60505614304. The Identity section at the top of this page lists every form of this code.
What do the three segments of this NDC mean?
In 60505-6143-04, the first segment (60505) is the labeler code FDA assigned to Apotex Corp.; the middle segment (6143) identifies this specific product — its ingredient, strength, and dosage form; and the last segment (04) identifies this exact package size and type. Together they name one specific package of one specific product.
Is this package still being marketed?
Yes, per the latest FDA NDC Directory data on this page: this package is listed as actively marketed, with no marketing end date reported by Apotex Corp.. Listing status can change — the directory data on this page refreshes weekly.
Who lists this product with the FDA?
Apotex Corp. is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
Does this product have a billing J-code?
Yes — this NDC cross-references HCPCS code J0690 for medical-claim billing (typically used when a product is administered in a clinical setting rather than dispensed at a retail pharmacy). See the Billing section on this page.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🎯 Indications and Usage ~2 min read

INDICATIONS AND USAGE Cefazolin for Injection, USP is indicated in the treatment of the following serious infections due to susceptible organisms: Respiratory Tract Infections: Due to S. pneumoniae , Klebsiella species, H. influenzae , S. aureus (penicillin-sensitive and penicillin-resistant), and group A beta-hemolytic streptococci. Injectable benzathine penicillin is considered to be the drug of choice in treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cefazolin for Injection, USP is effective in the eradication of streptococci from the nasopharynx; however, data establishing the efficacy of Cefazolin for Injection, USP in the subsequent prevention of rheumatic fever are not available at present.

Urinary Tract Infections: Due to E. coli , P. mirabilis , Klebsiella species, and some strains of enterobacter and enterococci. Skin and Skin Structure Infections: Due to S. aureus (penicillin-sensitive and penicillin-resistant), group A beta-hemolytic streptococci, and other strains of streptococci. Biliary Tract Infections: Due to E. coli , various strains of streptococci, P. mirabilis , Klebsiella species and S. aureus .

Bone and Joint Infections: Due to S. aureus. Genital Infections: (i.e., prostatitis, epididymitis) due to E. coli , P. mirabilis , Klebsiella species, and some strains of enterococci. Septicemia: Due to S. pneumoniae , S. aureus (penicillin-sensitive and penicillin-resistant), P. mirabilis , E. coli and Klebsiella species.

Endocarditis: Due to S. aureus (penicillin-sensitive and penicillin-resistant) and group A beta-hemolytic streptococci. Perioperative Prophylaxis: The prophylactic administration of Cefazolin for Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of certain postoperative infections in patients undergoing surgical procedures which are classified as contaminated or potentially contaminated (e.g., vaginal hysterectomy, and cholecystectomy in high-risk patients such as those older than 70 years, with acute cholecystitis, obstructive jaundice, or common duct bile stones).

The perioperative use of Cefazolin for Injection, USP may also be effective in surgical patients in whom infection at the operative site would present a serious risk (e.g., during open-heart surgery and prosthetic arthroplasty). The prophylactic administration of Cefazolin for Injection, USP should usually be discontinued within a 24 hour period after the surgical procedure. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection, USP may be continued for 3 to 5 days following the completion of surgery.

If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism so that appropriate therapy may be instituted. (See DOSAGE AND ADMINISTRATION .) To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cefazolin for Injection, USP and other antibacterial drugs, Cefazolin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.

In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

⏱️ Dosage and Administration ~3 min read

DOSAGE AND ADMINISTRATION THE INTENT OF THE PHARMACY BULK PACKAGE FOR THIS PRODUCT IS FOR PREPARATION OF SOLUTIONS FOR IV INFUSION ONLY. Usual Adult Dosage: Type of Infection Dose Frequency Moderate to severe infections 500 mg to 1 gram every 6 to 8 hrs. Mild infections caused by susceptible gram-positive cocci 250 mg to 500 mg every 8 hours Acute, uncomplicated urinary tract infections 1 gram every 12 hours Pneumococcal pneumonia 500 mg every 12 hours Severe, life-threatening infections (e.g., endocarditis, septicemia) In rare instances, doses of up to 12 grams of Cefazolin for injection per day have been used.

1 gram to 1.5 grams every 6 hours Perioperative Prophylactic Use: To prevent postoperative infection in contaminated or potentially contaminated surgery, recommended doses are: a. 1 gram IV administered 1 / 2 hour to 1 hour prior to the start of surgery. b. For lengthy operative procedures (e.g., 2 hours or more), 500 mg to 1 gram IV during surgery (administration modified depending on the duration of the operative procedure). c.

500 mg to 1 gram IV every 6 to 8 hours for 24 hours postoperatively. It is important that (1) the preoperative dose be given just ( 1 / 2 to 1 hour) prior to the start of surgery so that adequate antibiotic levels are present in the serum and tissues at the time of initial surgical incision; and (2) Cefazolin for Injection be administered, if necessary, at appropriate intervals during surgery to provide sufficient levels of the antibiotic at the anticipated moments of greatest exposure to infective organisms. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection may be continued for 3 to 5 days following the completion of surgery.

Dosage Adjustment for Patients With Reduced Renal Function: Cefazolin for Injection may be used in patients with reduced renal function with the following dosage adjustments: Patients with a creatinine clearance of 55 mL/min. or greater or a serum creatinine of 1.5 mg % or less can be given full doses. Patients with creatinine clearance rates of 35 to 54 mL/min. or serum creatinine of 1.6 to 3 mg % can also be given full doses but dosage should be restricted to at least 8 hour intervals. Patients with creatinine clearance rates of 11 to 34 mL/min. or serum creatinine of 3.1 to 4.5 mg % should be given 1 / 2 the usual dose every 12 hours.

Patients with creatinine clearance rates of 10 mL/min. or less or serum creatinine of 4.6 mg % or greater should be given 1 / 2 the usual dose every 18 to 24 hours. All reduced dosage recommendations apply after an initial loading dose appropriate to the severity of the infection. Patients undergoing peritoneal dialysis: See CLINICAL PHARMACOLOGY .

Pediatric Dosage: In pediatric patients, a total daily dosage of 25 to 50 mg per kg (approximately 10 to 20 mg per pound) of body weight, divided into 3 or 4 equal doses, is effective for most mild to moderately severe infections. Total daily dosage may be increased to 100 mg per kg (45 mg per pound) of body weight for severe infections. Since safety for use in premature infants and in neonates has not been established, the use of Cefazolin for Injection in these patients is not recommended.

Pediatric Dosage Guide Weight 25 mg/kg/day Divided into 3 Doses 25 mg/kg/day Divided into 4 Doses Lbs Kg Approximate Single Dose mg/q8h Vol. (mL) needed with dilution of 125 mg/mL Approximate Single Dose mg/q6h Vol. (mL) needed with dilution of 125 mg/mL 10 4.5 40 mg 0.35 mL 30 mg 0.25 mL 20 9.0 75 mg 0.60 mL 55 mg 0.45 mL 30 13.6 115 mg 0.90 mL 85 mg 0.70 mL 40 18.1 150 mg 1.20 mL 115 mg 0.90 mL 50 22.7 190 mg 1.50 mL 140 mg 1.10 mL Weight 50 mg/kg/day Divided into 3 Doses 50 mg/kg/day Divided into 4 Doses Lbs Kg Approximate Single Dose mg/q8h Vol.

(mL) needed with dilution of 225 mg/mL Approximate Single Dose mg/q6h Vol. (mL) needed with dilution of 225 mg/mL 10 4.…

Contraindications 17 words

CONTRAINDICATIONS CEFAZOLIN FOR INJECTION IS CONTRAINDICATED IN PATIENTS WITH KNOWN ALLERGY TO THE CEPHALOSPORIN GROUP OF ANTIBIOTICS.

⚠️ Warnings ~1 min read

WARNINGS BEFORE THERAPY WITH CEFAZOLIN FOR INJECTION USP IS INSTITUTED, CAREFUL INQUIRY SHOULD BE MADE TO DETERMINE WHETHER THE PATIENT HAS HAD PREVIOUS HYPERSENSITIVITY REACTIONS TO CEFAZOLIN, CEPHALOSPORINS, PENICILLINS, OR OTHER DRUGS. IF THIS PRODUCT IS GIVEN TO PENICILLIN-SENSITIVE PATIENTS, CAUTION SHOULD BE EXERCISED BECAUSE CROSS-HYPERSENSITIVITY AMONG BETA-LACTAM ANTIBIOTICS HAS BEEN CLEARLY DOCUMENTED AND MAY OCCUR IN UP TO 10% OF PATIENTS WITH A HISTORY OF PENICILLIN ALLERGY. IF AN ALLERGIC REACTION TO CEFAZOLIN FOR INJECTION USP OCCURS, DISCONTINUE TREATMENT WITH THE DRUG.

SERIOUS ACUTE HYPERSENSITIVITY REACTIONS MAY REQUIRE TREATMENT WITH EPINEPHRINE AND OTHER EMERGENCY MEASURES, INCLUDING OXYGEN, IV FLUIDS, IV ANTIHISTAMINES, CORTICOSTEROIDS, PRESSOR AMINES, AND AIRWAY MANAGEMENT, AS CLINICALLY INDICATED. Pseudomembranous colitis has been reported with nearly all antibacterial agents, including cefazolin, and may range in severity from mild to life-threatening. Therefore, it is important to consider this diagnosis in patients who present with diarrhea subsequent to the administration of antibacterial agents.

Treatment with antibacterial agents alters the normal flora of the colon and may permit overgrowth of clostridia. Studies indicate that a toxin produced by Clostridium difficile is a primary cause of “antibiotic-associated colitis.” After the diagnosis of pseudomembranous colitis has been established, therapeutic measures should be initiated. Mild cases of pseudomembranous colitis usually respond to drug discontinuation alone.

In moderate to severe cases, consideration should be given to management with fluids and electrolytes, protein supplementation, and treatment with an oral antibacterial drug clinically effective against C. difficile colitis.

🤒 Adverse Reactions 155 words

ADVERSE REACTIONS The following reactions have been reported: Gastrointestinal: Diarrhea, oral candidiasis (oral thrush), vomiting, nausea, stomach cramps, anorexia, and pseudomembranous colitis. Onset of pseudomembranous colitis symptoms may occur during or after antibiotic treatment (see WARNINGS ). Nausea and vomiting have been reported rarely.

Allergic: Anaphylaxis, eosinophilia, itching, drug fever, skin rash, Stevens-Johnson syndrome. Hematologic: Neutropenia, leukopenia, thrombocytopenia, thrombocythemia. Hepatic: Transient rise in SGOT, SGPT, and alkaline phosphatase levels has been observed.

As with other cephalosporins, reports of hepatitis have been received. Renal: As with other cephalosporins, reports of increased BUN and creatinine levels, as well as renal failure, have been received. Local Reactions: Rare instances of phlebitis have been reported at site of injection.

Pain at the site of injection after intramuscular administration has occurred infrequently. Some induration has occurred. Other Reactions: Genital and anal pruritus (including vulvar pruritus, genital moniliasis, and vaginitis).

To report SUSPECTED ADVERSE EVENTS, contact FDA at 1-800-FDA-1088 or www.fda.gov.

🧬 Clinical Pharmacology ~3 min read

CLINICAL PHARMACOLOGY After intramuscular administration of Cefazolin for Injection to normal volunteers, the mean serum concentrations were 37 mcg/mL at 1 hour and 3 mcg/mL at 8 hours following a 500-mg dose, and 64 mcg/mL at 1 hour and 7 mcg/mL at 8 hours following a 1-gram dose. Studies have shown that following intravenous administration of Cefazolin for Injection to normal volunteers, mean serum concentrations peaked at approximately 185 mcg/mL and were approximately 4 mcg/mL at 8 hours for a 1-gram dose. The serum half-life for Cefazolin for Injection is approximately 1.8 hours following IV administration.

In a study (using normal volunteers) of constant intravenous infusion with dosages of 3.5 mg/kg for 1 hour (approximately 250 mg) and 1.5 mg/kg the next 2 hours (approximately 100 mg), Cefazolin produced a steady serum level at the third hour of approximately 28 mcg/mL. Studies in patients hospitalized with infections indicate that Cefazolin produces mean peak serum levels approximately equivalent to those seen in normal volunteers. Bile levels in patients without obstructive biliary disease can reach or exceed serum levels by up to 5 times; however, in patients with obstructive biliary disease, bile levels of Cefazolin for Injection are considerably lower than serum levels (< 1 mcg/mL).

In synovial fluid, the level of Cefazolin for Injection becomes comparable to that reached in serum at about 4 hours after drug administration. Studies of cord blood show prompt transfer of Cefazolin across the placenta. Cefazolin for Injection is present in very low concentrations in the milk of nursing mothers.

Cefazolin for Injection is excreted unchanged in the urine. In the first 6 hours approximately 60% of the drug is excreted in the urine and this increases to 70% to 80% within 24 hours. Cefazolin for Injection achieves peak urine concentrations of approximately 2,400 mcg/mL and 4,000 mcg/mL respectively following 500-mg and 1-gram intramuscular doses.

In patients undergoing peritoneal dialysis (2 L/hr.), Cefazolin for Injection produced mean serum levels of approximately 10 and 30 mcg/mL after 24 hours’ instillation of a dialyzing solution containing 50 mg/L and 150 mg/L, respectively. Mean peak levels were 29 mcg/mL (range 13 to 44 mcg/mL) with 50 mg/L (3 patients), and 72 mcg/mL (range 26 to 142 mcg/mL) with 150 mg/L (6 patients). Intraperitoneal administration of Cefazolin is usually well tolerated.

Controlled studies on adult normal volunteers, receiving 1 gram 4 times a day for 10 days, monitoring CBC, SGOT, SGPT, bilirubin, alkaline phosphatase, BUN, creatinine and urinalysis, indicated no clinically significant changes attributed to Cefazolin. Microbiology Mechanism of Action Cefazolin is a bactericidal agent that acts by inhibition of bacterial cell wall synthesis. Resistance Predominant mechanisms of bacterial resistance to cephalosporins include the presence of extended-spectrum beta-lactamases and enzymatic hydrolysis.

Antimicrobial Activity Cefazolin has been shown to be active against most isolates of the following microorganisms, both in vitro and in clinical infections as described in the INDICATIONS AND USAGE section. Gram-Positive Bacteria Staphylococcus aureus Staphylococcus epidermidis Streptococcus agalactiae Streptococcus pneumonia Streptococcus pyogenes Methicillin-resistant staphylococci are uniformly resistant to cefazolin. Gram-Negative Bacteria Escherichia coli Proteus mirabilis Most isolates of indole positive Proteus ( Proteus vulgaris ), Enterobacter spp., Morganella morganii, Providencia rettgeri, Serratia spp., and Pseudomonas spp. are resistant to cefazolin.

Susceptibility Testing For specific information regarding susceptibility test interpretive criteria and associated test methods and quality control standards recognized by FDA for this drug, please see: https://www.fda.gov/STIC.

📦 How Supplied / Storage and Handling 69 words

HOW SUPPLIED Cefazolin for Injection, USP, is supplied in 10 grams Pharmacy Bulk Package. Unit of Sale Strength NDC 60505-6143-4 Carton containing 10 10 grams/vial As with other cephalosporins, Cefazolin for Injection tends to darken depending on storage conditions; within the stated recommendations, however, product potency is not adversely affected. Before reconstitution protect from light and store at 20° to 25°C (68° to 77°F) [See USP Controlled Room Temperature].

📋 Description 206 words

DESCRIPTION Cefazolin for Injection, USP is a semi-synthetic cephalosporin for parenteral administration. It is the sodium salt of (6 R , 7 R )-3- {[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl)acetamido]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. The molecular formula is C 14 H 13 N 8 NaO 4 S 3 and molecular weight is 476.49.

Structural Formula: Each vial contains 48 mg (2 mEq) of sodium/1 gram of cefazolin. Cefazolin for Injection, USP is white or off-white powder or crystalline powder. Cefazolin for Injection, USP is supplied in 10 grams Pharmacy Bulk Packages.

Each Pharmacy Bulk Package contains cefazolin sodium equivalent to 10 grams of cefazolin. After reconstitution with either 45 mL or 96 mL of diluent the concentration is 1 gram cefazolin per 5 mL or 1 gram cefazolin per 10 mL, respectively. The pH of the reconstituted solution is between 4.0 and 6.0.

A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION , Directions for Proper Use of Pharmacy Bulk Package.) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION. structure

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.