Valsartan and Hydrochlorothiazide 80 mg; 12.5 mg Tablet, Film Coated, 1,000-count — NDC 65162-0845-11 package photo

Valsartan and Hydrochlorothiazide 80 mg; 12.5 mg Tablet, Film Coated, 1,000-count

by Amneal Pharmaceuticals LLC · 1000 TABLET, FILM COATED in 1 BOTTLE (65162-845-11)
NDC 65162-0845-11
🏷️ FDA NDC (as labeled) 65162-845-11 billing pads the product segment with a zero
This package
Contains1,000-count Pack sizes4 compare ↓
Also priced by: Part D plans $0.3156/unit — full pricing hub ↓
Rx only Generic On market Non-controlled
🗂️ Data synced Sep 10, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

🆔 Identity & classification

FDA NDC (as labeled) 65162-845-11
Product NDC 65162-845
11-digit billing NDC 65162084511
UNII 0J48LPH2TH, 80M03YXJ7I
UPC 0365162849097, 0365162847093, 0365162846096, 0365162848090
Application # ANDA204382
SPL Set ID c9acbc95-3629-4276-842b-5c074844dba7
Established class (EPC) Thiazide Diuretic; Angiotensin 2 Receptor Blocker
Mechanism of action Angiotensin 2 Receptor Antagonists
Physiologic effect Increased Diuresis
Chemical class Thiazides
DEA schedule Non-controlled
Marketing category ANDA
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 2023-08-14
Route ORAL
Dosage form TABLET, FILM COATED
Substance VALSARTAN; HYDROCHLOROTHIAZIDE
TE code (Orange Book) AB · RLD · RS
Why two NDCs? The FDA registers this code as 65162-845-11 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 65162-0845-11. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Thiazide Diuretic class.

Pharmacologic class Thiazide Diuretic
Drug family (ATC) Renin-inhibitors, Thiazides, plain
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerAmneal Pharmaceuticals LLC
Application holderAMNEAL PHARMACEUTICALS OF NEW YORK LLC
FDA applicationANDA204382 (ANDA)
Labeler code65162
First marketedAug 2023
Product typeHuman Prescription Drug
Portfolio472 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

📖 What it is MedlinePlus · NLM

Hydrochlorothiazide is used alone or in combination with other medications to treat high blood pressure. Hydrochlorothiazide is used to treat edema (fluid retention; excess fluid held in body tissues) caused by various medical problems, including heart, kidney, and liver disease and to treat edema caused by using certain medications including estrogen and corticosteroids. Hydrochlorothiazide is in a class of medications called diuretics ('water pills'). It works by causing the kidneys to get rid of unneeded water and salt from the body into the urine. High blood pressure is a common condition...

Read the full MedlinePlus article ↗
📗 Our plain-language guide HelloPharmacist
  • This tablet combines two different blood pressure-lowering medicines in one pill: valsartan, which relaxes your blood vessels, and hydrochlorothiazide, a water pill that helps your...
  • What exactly is this medication and why did my doctor prescribe it?
  • You can take it either way — with or without food. The hydrochlorothiazide part isn't affected by food at all. Food does reduce how much valsartan your body absorbs, but since you...
  • Does it matter if I take it with food or on an empty stomach?
📖 Read our full Valsartan and Hydrochlorothiazide guide →
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

💊 What it looks like

Color pink / red / brown / yellow
ShapeOval
Imprint849;AN
Size18 mm
ScoringNot scored
One label can cover several strengths, so colors may be combined — always confirm a loose pill against the dispensed prescription label or a pharmacist.
Where does this data come from?
Physical description (imprint, shape, color, scoring, coating) from this product’s FDA Structured Product Labeling (SPL), mirrored from DailyMed / openFDA.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • UNII OP1R32D61U
    Microcrystalline cellulose is a purified form of cellulose, a natural fiber from plant sources. It acts as a binder and filler in tablets and capsules, helping hold ingredients together and give the medicine its shape and size.
  • UNII M28OL1HH48
    Croscarmellose sodium is a plant-based substance derived from cellulose. It acts as a disintegrant, helping tablets and capsules break down quickly in the digestive system so the medicine can be absorbed.
  • UNII WZB9127XOA
    A synthetic red dye used to color medications and make them easier to identify. It serves as a colorant in tablets, capsules, and liquid formulations.
  • UNII EX438O2MRT
    Ferric oxide yellow is a naturally occurring iron compound used as a colorant in medications. It gives tablets, capsules, and other forms a yellow or golden hue for identification and appearance.
  • UNII XM0M87F357
    A dark iron oxide compound that gives medicines their black or dark color. It's used as a colorant in tablets and capsules to help identify the product and make it visually distinctive.
  • UNII 3NXW29V3WO
    Hypromellose is a plant-based thickener made from cellulose. It's used in medicines as a binder to hold ingredients together, a coating for tablets, and a thickener for liquids.
  • UNII 70097M6I30
    Magnesium stearate is a salt made from magnesium and stearic acid, a fatty substance. It's used in tablets and capsules as a lubricant and glidant to help ingredients flow smoothly during manufacturing and prevent sticking.
  • UNII 3WJQ0SDW1A
    Polyethylene glycol is a synthetic liquid or solid polymer used in medicines as a solvent, lubricant, and humectant. It helps dissolve active ingredients, reduces friction during manufacturing, and retains moisture in the final product.
  • UNII 532B59J990
    Polyvinyl alcohol is a synthetic polymer made from plant-derived materials. It's used as a binder to hold ingredients together, a film-former in coatings, and a thickener in liquid formulations.
  • UNII ETJ7Z6XBU4
    Silicon dioxide is a naturally occurring mineral used as a glidant and anti-caking agent. It helps powder ingredients flow smoothly and prevents clumping during manufacturing and storage.
  • UNII 7SEV7J4R1U
    A powder made from a naturally occurring mineral. In medicines, talc works as a glidant and anti-caking agent, helping tablets and capsules flow smoothly during manufacturing and preventing clumping.
  • UNII 15FIX9V2JP
    Titanium dioxide is a bright white mineral powder commonly used as a colorant and opacifying agent. It makes pills and tablets white or lighter in color and helps make coatings non-transparent.

12 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMedingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer eachPer package
Retail pharmacies payNADAC · weekly Not in the retail survey — common for institutional, discontinued, or low-volume packs.
Medicaid paysCMS SDUD · 12 mo No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · Q2 2026 $0.3156 $315.60 / 1000 tablets
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 00378-6321-77 Mylan 90 tablets $0.100 AB Availability likely
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 33342-0074-10 Macleods 90 tablets $0.100 AB Availability likely
Diovan HCT 80 mg/1; 12.5 mg 00078-0314-34 Novartis 90 tablets $10.565 AB Availability likely
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 42291-0965-90 AvKARE 90 tablets AB FDA listed
Valsartan And Hydrochlorothiazide 80 mg/1; 12.5 mg 43547-0311-03 Solco 30 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 46708-0453-10 Alembic 100 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 50090-3292-00 A-S 90 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 50090-3576-00 A-S 90 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 53746-0845-90 Amneal 90 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 62332-0079-10 Alembic 100 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 63187-0571-30 Proficient 30 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 63187-0943-30 Proficient 30 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mgthis 65162-0845-11 Amneal 1000 tablets AB FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 65862-0547-10 Aurobindo 10 tablets FDA listed
valsartan and hydrochlorothiazide 80 mg/1; 12.5 mg 70771-1485-00 Zydus 1000 tablets FDA listed
Valsartan and Hydrochlorothiazide 12.5 mg/1; 80 mg 71205-0249-30 Proficient 30 tablets FDA listed
Valsartan and Hydrochlorothiazide 80 mg/1; 12.5 mg 71205-0327-30 Proficient 30 tablets AB FDA listed
Valsartan And Hydrochlorothiazide 80 mg/1; 12.5 mg 71335-2618-01 Bryant 30 tablets AB FDA listed
Valsartan And Hydrochlorothiazide 80 mg/1; 12.5 mg 50228-0147-10 ScieGen 1000 tablets AB FDA listed
About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

Availability & generic status

🏛️
2023
On the market since
Aug 2023
📍
2026
Currently FDA-listed
3 years listed
🔓
·
Generic on the market
this product is a generic
This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

🔬 Reported adverse events (FAERS)

Read carefully: FAERS reports are voluntary and unverified. Counts are not incidence, do not establish causation, are subject to reporting bias, and cannot be used to compare one drug to another. Shown for signal context only. Reports for Valsartan and Hydrochlorothiazide — the ingredient across all brands.

Top reported reactions

Blood Pressure Increased1,182
Hypertension996
Dizziness971
Headache878
Fatigue832
Malaise770
Death753

Age at onset

Neonate2
Adult435
Elderly519

Reporter sex

17,095 reports
Male · 36%
Female · 64%
Unknown · 0%

Serious outcomes

Hospitalization5,175
Reports over time (by year) — tap or hover for the count & year
2020 2022 2024 2026 736 138
Most recent year is provisional (FAERS lags ~3 months).
Where does this data come from?
Adverse-event reports from the FDA Adverse Event Reporting System (FAERS) via openFDA. FAERS reports are voluntary and unverified — counts are not incidence and don’t establish causation.

📦 Packaging — all sizes for this product

Package NDCDescription Marketing startStatus
65162-0845-03 30 TABLET, FILM COATED in 1 BOTTLE (65162-845-03) 2023-08-14 Active
65162-0845-09 90 TABLET, FILM COATED in 1 BOTTLE (65162-845-09) 2023-08-14 Active
65162-0845-11 You're viewing this 1000 TABLET, FILM COATED in 1 BOTTLE (65162-845-11) 2023-08-14 Active
65162-0845-50 500 TABLET, FILM COATED in 1 BOTTLE (65162-845-50) 2023-08-14 Active

You're viewing the largest of 4 pack sizes for this product.

Pack size FAQ

What quantity is in NDC 65162-0845-11?
NDC 65162-0845-11 is a 1,000-count package — 1000 tablet, film coated in 1 bottle.
What is the difference between NDC 65162-0845-11 and NDC 65162-0845-03?
Both are Valsartan and Hydrochlorothiazide 80 mg; 12.5 mg Tablet, Film Coated — the drug itself is identical. NDC 65162-0845-11 is the 1,000-count package, while NDC 65162-0845-03 is the 30 tablets package.
What NDC number is used to bill for this package of Valsartan and Hydrochlorothiazide 80 mg; 12.5 mg Tablet, Film Coated?
Bill NDC 65162-0845-11 — the 11-digit billing format is 65162084511. Pharmacy and medical claims use the 11-digit form; the FDA label may print a shorter form of the same code.

🧭 About this NDC listing & data coverage

Finished prescription product
What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos ✓ Available
Inactive ingredients (structured) ✓ Available
NADAC pharmacy acquisition price (CMS) — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey.
Orange Book / therapeutic-equivalence data ✓ Available
HCPCS J-code billing crosswalk — Not published for this NDC Most self-administered / retail products have no J-code — that is normal.
Medicaid utilization (CMS SDUD) — Not published for this NDC CMS reports utilization only for NDCs with Medicaid claims above its privacy threshold.
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Why is there no price listed?
The pricing shown on our NDC pages comes from CMS NADAC, a voluntary survey of retail community pharmacy invoices. CMS does not publish a NADAC for every NDC — packages outside the retail survey (institutional and hospital products, bulk packages, discontinued items, and many OTC items) may never receive one. A missing price reflects the survey's scope, not this product's actual cost, and does not mean the product is free or unavailable.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The FDA registers it as 65162-845-11, which is what is printed on the packaging and shown on DailyMed. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero: 65162-0845-11, written without dashes as 65162084511. The Identity section at the top of this page lists every form of this code.
What do the three segments of this NDC mean?
In 65162-0845-11, the first segment (65162) is the labeler code FDA assigned to Amneal Pharmaceuticals LLC; the middle segment (0845) identifies this specific product — its ingredient, strength, and dosage form; and the last segment (11) identifies this exact package size and type. Together they name one specific package of one specific product.
Is this package still being marketed?
Yes, per the latest FDA NDC Directory data on this page: this package is listed as actively marketed, with no marketing end date reported by Amneal Pharmaceuticals LLC. Listing status can change — the directory data on this page refreshes weekly.
Does this product come in other package sizes?
Yes — the FDA directory lists 3 other package presentations of this same product, including 30 tablets (65162-0845-03), 90 tablets (65162-0845-09), 500 tablets (65162-0845-50). Each has its own NDC and its own page — see the package list near the top of this page.
Who lists this product with the FDA?
Amneal Pharmaceuticals LLC is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🚨 Boxed Warning 78 words

WARNING: FETAL TOXICITY When pregnancy is detected, discontinue valsartan and hydrochlorothiazide tablets as soon as possible. (5.1) Drugs that act directly on the renin-angiotensin system can cause injury and death to the developing fetus. (5.1) WARNING: FETAL TOXICITY See full prescribing information for complete boxed warning.

When pregnancy is detected, discontinue valsartan and hydrochlorothiazide tablets as soon as possible. (5.1) Drugs that act directly on the renin-angiotensin system can cause injury and death to the developing fetus. (5.1)

🎯 Indications and Usage ~3 min read

1 INDICATIONS AND USAGE Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the ARB class to which valsartan principally belongs.

There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals.

For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits.

The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.

Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy.

Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks.

Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient’s risk.

Data from the high dose multifactorial trial [see Clinical Studies (14.1) ] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets comp…

⏱️ Dosage and Administration ~1 min read

2 DOSAGE AND ADMINISTRATION Dose once daily. Titrate as needed to a maximum dose of 320 mg/25 mg. (2) May be used as add-on/switch therapy for patients not adequately controlled on any of the components (valsartan or HCTZ). (2) May be substituted for titrated components. (2.3)

2.1General Considerations The usual starting dose is valsartan and hydrochlorothiazide tablets 160 mg/12.5 mg once daily. The dosage can be increased after 1 to 2 weeks of therapy to a maximum of one 320 mg/25 mg tablet once daily as needed to control blood pressure [see Clinical Studies (14.2) ]. Maximum antihypertensive effects are attained within 2 to 4 weeks after a change in dose.

2.2Add-On Therapy A patient whose blood pressure is not adequately controlled with valsartan (or another ARB) alone or hydrochlorothiazide alone may be switched to combination therapy with valsartan and hydrochlorothiazide tablets. A patient who experiences dose-limiting adverse reactions on either component alone may be switched to valsartan and hydrochlorothiazide tablets containing a lower dose of that component in combination with the other to achieve similar blood pressure reductions. The clinical response to valsartan and hydrochlorothiazide tablets should be subsequently evaluated and if blood pressure remains uncontrolled after 3 to 4 weeks of therapy, the dose may be titrated up to a maximum of 320 mg/25 mg.

2.3Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components.

2.4Initial Therapy Valsartan and hydrochlorothiazide tablets are not recommended as initial therapy in patients with intravascular volume depletion [see Warnings and Precautions (5.2) ].

2.5Use with Other Antihypertensive Drugs Valsartan and hydrochlorothiazide tablets may be administered with other antihypertensive agents.

💊 Dosage Forms and Strengths 158 words

3 DOSAGE FORMS AND STRENGTHS Valsartan and Hydrochlorothiazide Tablets USP, 80 mg/12.5 mg are pink, ovaloid, film-coated, unscored tablet debossed with “845” on one side and “AN” on the other side. Valsartan and Hydrochlorothiazide Tablets USP, 160 mg/12.5 mg are red, ovaloid, film-coated, unscored tablet debossed with “846” on one side and “AN” on the other side. Valsartan and Hydrochlorothiazide Tablets USP, 160 mg/25 mg are brown, ovaloid, film-coated, unscored tablet debossed with “847” on one side and “AN” on the other side.

Valsartan and Hydrochlorothiazide Tablets USP, 320 mg/12.5 mg are light pink, ovaloid, film-coated, unscored, beveled edge tablet debossed with “848” on one side and “AN” on the other side. Valsartan and Hydrochlorothiazide Tablets USP, 320 mg/25 mg are yellow, ovaloid, film-coated, unscored, beveled edge tablet debossed with “849” on one side and “AN” on the other side. Tablets (valsartan/HCTZ): 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, 320 mg/25 mg (3)

Contraindications 80 words

4 CONTRAINDICATIONS Valsartan and hydrochlorothiazide tablets are contraindicated in patients who are hypersensitive to any component of this product. Because of the hydrochlorothiazide component, this product is contraindicated in patients with anuria or hypersensitivity to other sulfonamide-derived drugs. Do not co-administer aliskiren with valsartan and hydrochlorothiazide tablets in patients with diabetes [see Drug Interactions (7) ] .

Anuria; Hypersensitivity to any sulfonamide-derived drugs or any component; Do not co-administer aliskiren with valsartan and hydrochlorothiazide tablets in patients with diabetes. (4)

⚠️ Warnings and Cautions ~2 min read

5 WARNINGS AND PRECAUTIONS Hypotension: Correct volume depletion prior to initiation. (5.2) Observe for signs of fluid or electrolyte imbalance. (5.9) Monitor renal function and potassium in susceptible patients. (5.3, 5.7) Exacerbation or activation of systemic lupus erythematosus. (5.5) Acute angle-closure glaucoma. (5.8)

5.1Fetal Toxicity Pregnancy Category D Use of drugs that act on the renin-angiotensin system during the second and third trimesters of pregnancy reduces fetal renal function and increases fetal and neonatal morbidity and death. Resulting oligohydramnios can be associated with fetal lung hypoplasia and skeletal deformations. Potential neonatal adverse effects include skull hypoplasia, anuria, hypotension, renal failure, and death.

When pregnancy is detected, discontinue valsartan and hydrochlorothiazide as soon as possible [see Use in Specific Populations (8.1) ]. Intrauterine exposure to thiazide diuretics is associated with fetal or neonatal jaundice, thrombocytopenia, and possibly other adverse reactions that have occurred in adults.

5.2Hypotension in Volume- and/or Salt-Depleted Patients Excessive reduction of blood pressure was rarely seen (0.7%) in patients with uncomplicated hypertension treated with valsartan and hydrochlorothiazide in controlled trials. In patients with an activated renin-angiotensin system, such as volume- and/or salt-depleted patients receiving high doses of diuretics, symptomatic hypotension may occur. This condition should be corrected prior to administration of valsartan and hydrochlorothiazide, or the treatment should start under close medical supervision.

If hypotension occurs, the patient should be placed in the supine position and, if necessary, given an intravenous infusion of normal saline. A transient hypotensive response is not a contraindication to further treatment, which usually can be continued without difficulty once the blood pressure has stabilized.

5.3Impaired Renal Function Changes in renal function including acute renal failure can be caused by drugs that inhibit the renin-angiotensin system and by diuretics. Patients whose renal function may depend in part on the activity of the renin-angiotensin system (e.g., patients with renal artery stenosis, chronic kidney disease, severe congestive heart failure, or volume depletion) may be at particular risk of developing acute renal failure on valsartan and hydrochlorothiazide. Monitor renal function periodically in these patients.

Consider withholding or discontinuing therapy in patients who develop a clinically significant decrease in renal function on valsartan and hydrochlorothiazide [see Drug Interactions (7) ] .

5.4Hypersensitivity Reaction Hydrochlorothiazide: Hypersensitivity reactions to hydrochlorothiazide may occur in patients with or without a history of allergy or bronchial asthma, but are more likely in patients with such a history.

5.5Systemic Lupus Erythematosus Hydrochlorothiazide: Thiazide diuretics have been reported to cause exacerbation or activation of systemic lupus erythematosus.

5.6Lithium Interaction Increases in serum lithium concentrations and lithium toxicity have been reported with concomitant use of valsartan or thiazide diuretics. Monitor lithium levels in patients receiving valsartan and hydrochlorothiazide tablets and lithium [see Drug Interactions (7) ].

5.7Potassium Abnormalities Valsartan and Hydrochlorothiazide In the controlled trials of various doses of valsartan and hydrochlorothiazide the incidence of hypertensive patients who developed hypokalemia (serum potassium < 3.5 mEq/L) was 3.0%; the incidence of hyperkalemia (serum potassium > 5.7 mEq/L) was 0.4%. Hydrochlorothiazide can cause hypokalemia and hyponatremia. Hypomagnesemia can result in hypokalemia which appears difficult to treat despite potassium repletion.

Drugs that inhibit the renin-angiotensin system can cause hyperkalemia. Monitor serum electrolytes periodically. If hypokalemia is accompanied by clinical s…

🤒 Adverse Reactions ~2 min read

6 ADVERSE REACTIONS The most common reasons for discontinuation of therapy with valsartan and hydrochlorothiazide were headache and dizziness. The only adverse experience that occurred in ≥2% of patients treated with valsartan and hydrochlorothiazide and at a higher incidence than placebo was nasopharyngitis (2.4% vs. 1.9%).

(6.1) To report SUSPECTED ADVERSE REACTIONS, contact Amneal Pharmaceuticals at 1-877-835-5472 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch .

6.1Clinical Trials Experience Because clinical studies are conducted under widely varying conditions, adverse reactions rates observed in the clinical studies of a drug cannot be directly compared to rates in the clinical studies of another drug and may not reflect the rates observed in practice. The adverse reaction information from clinical trials does, however, provide a basis for identifying the adverse events that appear to be related to drug use and for approximating rates. Hypertension Valsartan and hydrochlorothiazide has been evaluated for safety in more than 5,700 patients, including over 990 treated for over 6 months, and over 370 for over 1 year.

Adverse experiences have generally been mild and transient in nature and have only infrequently required discontinuation of therapy. The overall incidence of adverse reactions with valsartan and hydrochlorothiazide was comparable to placebo. The overall frequency of adverse reactions was neither dose-related nor related to gender, age, or race.

In controlled clinical trials, discontinuation of therapy due to side effects was required in 2.3% of valsartan and hydrochlorothiazide patients and 3.1% of placebo patients. The most common reasons for discontinuation of therapy with valsartan and hydrochlorothiazide were headache and dizziness. The only adverse reaction that occurred in controlled clinical trials in at least 2% of patients treated with valsartan and hydrochlorothiazide and at a higher incidence in valsartan and hydrochlorothiazide (n=4372) than placebo (n=262) patients was nasopharyngitis (2.4% vs.

1.9%). Dose-related orthostatic effects were seen in fewer than 1% of patients. In individual trials, a dose-related increase in the incidence of dizziness was observed in patients treated with valsartan and hydrochlorothiazide.

Other adverse reactions that have been reported with valsartan and hydrochlorothiazide (>0.2% of valsartan and hydrochlorothiazide patients in controlled clinical trials) without regard to causality, are listed below: Cardiovascular: Palpitations and tachycardia Ear and Labyrinth: Tinnitus and vertigo Gastrointestinal: Dyspepsia, diarrhea, flatulence, dry mouth, nausea, abdominal pain, abdominal pain upper, and vomiting General and Administration Site Conditions: Asthenia, chest pain, fatigue, peripheral edema and pyrexia Infections and Infestations: Bronchitis, bronchitis acute, influenza, gastroenteritis, sinusitis, upper respiratory tract infection, and urinary tract infection Investigations: Blood urea increased Musculoskeletal: Arthralgia, back pain, muscle cramps, myalgia, and pain in extremity Nervous System: Dizziness postural, paresthesia, and somnolence Psychiatric: Anxiety and insomnia Renal and Urinary: Pollakiuria Reproductive System: Erectile dysfunction Respiratory, Thoracic and Mediastinal: Dyspnea, cough, nasal congestion, pharyngolaryngeal pain, and sinus congestion Skin and Subcutaneous Tissue: Hyperhidrosis and rash Vascular: Hypotension Other reported reactions seen less frequently in clinical trials included abnormal vision, anaphylaxis, bronchospasm, constipation, depression, dehydration, decreased libido, dysuria, epistaxis, flushing, gout, increased appetite, muscle weakness, pharyngitis, pruritus, sunburn, syncope, and viral infection.

Initial Therapy-Hypertension In a clinical study in patients with severe hypertension (diastolic blood pressure ≥ 110 mmHg and systolic blood pressure ≥ 140 mmHg), the overall pattern of adverse reactions reported through si…

🔄 Drug Interactions ~2 min read

7 DRUG INTERACTIONS Valsartan and Hydrochlorothiazide Lithium: Increases in serum lithium concentrations and lithium toxicity have been reported during concomitant administration of lithium with angiotensin II receptor antagonists or thiazides. Monitor lithium levels in patients taking valsartan and hydrochlorothiazide. Valsartan No clinically significant pharmacokinetic interactions were observed when valsartan was co-administered with amlodipine, atenolol, cimetidine, digoxin, furosemide, glyburide, hydrochlorothiazide, or indomethacin.

The valsartan-atenolol combination was more antihypertensive than either component, but it did not lower the heart rate more than atenolol alone. Co-administration of valsartan and warfarin did not change the pharmacokinetics of valsartan or the time-course of the anticoagulant properties of warfarin. CYP 450 Interactions: In vitro metabolism studies indicate that CYP 450 mediated drug interactions between valsartan and co-administered drugs are unlikely because of the low extent of metabolism [see Clinical Pharmacology (12.3) ].

Transporters: The results from an in vitro study with human liver tissue indicate that valsartan is a substrate of the hepatic uptake transporter OATP1B1 and the hepatic efflux transporter MRP2. Co-administration of inhibitors of the uptake transporter (rifampin, cyclosporine) or efflux transporter (ritonavir) may increase the systemic exposure to valsartan. Non-Steroidal Anti-Inflammatory Agents including Selective Cyclooxygenase-2 Inhibitors (COX-2 Inhibitors): In patients who are elderly, volume-depleted (including those on diuretic therapy), or with compromised renal function, co-administration of NSAIDs, including selective COX-2 inhibitors, with angiotensin II receptor antagonists, including valsartan, may result in deterioration of renal function, including possible acute renal failure.

These effects are usually reversible. Monitor renal function periodically in patients receiving valsartan and NSAID therapy. The antihypertensive effect of angiotensin II receptor antagonists, including valsartan may be attenuated by NSAIDs including selective COX-2 inhibitors.

Potassium: Concomitant use of valsartan with other agents that block the renin-angiotensin system, potassium-sparing diuretics (e.g., spironolactone, triamterene, amiloride), potassium supplements, or salt substitutes containing potassium or other drugs that may increase potassium levels (e.g., heparin) may lead to increases in serum potassium and in heart failure patients to increases in serum creatinine. If co-medication is considered necessary, monitoring of serum potassium is advisable. Dual Blockade of the Renin-Angiotensin System (RAS): Dual blockade of the RAS with angiotensin receptor blockers, ACE inhibitors, or aliskiren is associated with increased risks of hypotension, hyperkalemia, and changes in renal function (including acute renal failure) compared to monotherapy.

Most patients receiving the combination of two RAS inhibitors do not obtain any additional benefit compared to monotherapy. In general, avoid combined use of RAS inhibitors. Closely monitor blood pressure, renal function, and electrolytes in patients on valsartan and hydrochlorothiazide and other agents that affect the RAS.

Do not co-administer aliskiren with valsartan and hydrochlorothiazide in patients with diabetes. Avoid use of aliskiren with valsartan and hydrochlorothiazide in patients with renal impairment (GFR <60 mL/min). Hydrochlorothiazide: When administered concurrently, the following drugs may interact with thiazide diuretics: Antidiabetic Drugs (oral agents and insulin) - Dosage adjustment of the antidiabetic drug may be required.

Nonsteroidal Anti-inflammatory Drugs (NSAIDs and COX-2 selective inhibitors) - When valsartan and hydrochlorothiazide and nonsteroidal anti-inflammatory agents are used concomitantly, the patient should be observed closely to determine if the desired effect of the diuretic is obtained. Ca…

👥 Use in Specific Populations ~3 min read

8 USE IN SPECIFIC POPULATIONS Nursing Mothers: Nursing or drug should be discontinued. (8.3)

8.1Pregnancy Pregnancy Category D Use of drugs that act on the renin-angiotensin system during the second and third trimesters of pregnancy reduces fetal renal function and increases fetal and neonatal morbidity and death. Resulting oligohydramnios can be associated with fetal lung hypoplasia and skeletal deformations. Potential neonatal adverse effects include skull hypoplasia, anuria, hypotension, renal failure, and death.

When pregnancy is detected, discontinue valsartan and hydrochlorothiazide as soon as possible. These adverse outcomes are usually associated with use of these drugs in the second and third trimester of pregnancy. Most epidemiologic studies examining fetal abnormalities after exposure to antihypertensive use in the first trimester have not distinguished drugs affecting the renin-angiotensin system from other antihypertensive agents.

Appropriate management of maternal hypertension during pregnancy is important to optimize outcomes for both mother and fetus. In the unusual case that there is no appropriate alternative to therapy with drugs affecting the renin-angiotensin system for a particular patient, apprise the mother of the potential risk to the fetus. Perform serial ultrasound examinations to assess the intra-amniotic environment.

If oligohydramnios is observed, discontinue valsartan and hydrochlorothiazide, unless it is considered lifesaving for the mother. Fetal testing may be appropriate, based on the week of pregnancy. Patients and physicians should be aware, however, that oligohydramnios may not appear until after the fetus has sustained irreversible injury.

Closely observe infants with histories of in utero exposure to valsartan and hydrochlorothiazide for hypotension, oliguria, and hyperkalemia [see Use in Specific Populations (8.4) ]. Hydrochlorothiazide Thiazides can cross the placenta, and concentrations reached in the umbilical vein approach those in the maternal plasma. Hydrochlorothiazide, like other diuretics, can cause placental hypoperfusion.

It accumulates in the amniotic fluid, with reported concentrations up to 19 times higher than in umbilical vein plasma. Use of thiazides during pregnancy is associated with a risk of fetal or neonatal jaundice or thrombocytopenia. Since they do not prevent or alter the course of EPH (Edema, Proteinuria, Hypertension) gestosis (pre-eclampsia), these drugs should not be used to treat hypertension in pregnant women.

The use of hydrochlorothiazide for other indications (e.g., heart disease) in pregnancy should be avoided.

8.3Nursing Mothers It is not known whether valsartan is excreted in human milk. Valsartan was excreted into the milk of lactating rats; however, animal breast milk drug levels may not accurately reflect human breast milk levels. Hydrochlorothiazide is excreted in human breast milk.

Because many drugs are excreted into human milk and because of the potential for adverse reactions in nursing infants from valsartan and hydrochlorothiazide, a decision should be made whether to discontinue nursing or discontinue the drug, taking into account the importance of the drug to the mother.

8.4Pediatric Use Safety and effectiveness of valsartan and hydrochlorothiazide in pediatric patients have not been established. Neonates with a history of in utero exposure to valsartan and hydrochlorothiazide If oliguria or hypotension occurs, direct attention toward support of blood pressure and renal perfusion. Exchange transfusions or dialysis may be required as a means of reversing hypotension and/or substituting for disordered renal function.

8.5Geriatric Use In the controlled clinical trials of valsartan and hydrochlorothiazide, 764 (17.5%) patients treated with valsartan and hydrochlorothiazide were ≥ 65 years and 118 (2.7%) were ≥ 75 years. No overall difference in the efficacy or safety of valsartan and hydrochlorothiazide was observed between these patient…

🆘 Overdosage ~1 min read

10 OVERDOSAGE Valsartan and Hydrochlorothiazide Limited data are available related to overdosage in humans. The most likely manifestations of overdosage would be hypotension and tachycardia; bradycardia could occur from parasympathetic (vagal) stimulation. Depressed level of consciousness, circulatory collapse and shock have been reported.

If symptomatic hypotension should occur, supportive treatment should be instituted. Valsartan is not removed from the plasma by dialysis. The degree to which hydrochlorothiazide is removed by hemodialysis has not been established.

The most common signs and symptoms observed in patients are those caused by electrolyte depletion (hypokalemia, hypochloremia, hyponatremia) and dehydration resulting from excessive diuresis. If digitalis has also been administered, hypokalemia may accentuate cardiac arrhythmias. In rats and marmosets, single oral doses of valsartan up to 1,524 and 762 mg/kg in combination with hydrochlorothiazide at doses up to 476 and 238 mg/kg, respectively, were very well tolerated without any treatment-related effects.

These no adverse effect doses in rats and marmosets, respectively, represent 46.5 and 23 times the maximum recommended human dose (MRHD) of valsartan and 188 and 113 times the MRHD of hydrochlorothiazide on a mg/m 2 basis (calculations assume an oral dose of 320 mg/day valsartan in combination with 25 mg/day hydrochlorothiazide and a 60 kg patient). Valsartan Valsartan was without grossly observable adverse effects at single oral doses up to 2,000 mg/kg in rats and up to 1,000 mg/kg in marmosets, except for salivation and diarrhea in the rat and vomiting in the marmoset at the highest dose (60 and 31 times, respectively, the MRHD on a mg/m 2 basis) (calculations assume an oral dose of 320 mg/day and a 60 kg patient).

Hydrochlorothiazide The oral LD 50 of hydrochlorothiazide is greater than 10 g/kg in both mice and rats, which represents 2,027 and 4,054 times, respectively, the MRHD on a mg/m 2 basis (calculations assume an oral dose of 25 mg/day and a 60 kg patient).

🧬 Clinical Pharmacology ~3 min read

12 CLINICAL PHARMACOLOGY

12.1Mechanism of Action Angiotensin II is formed from angiotensin I in a reaction catalyzed by angiotensin-converting enzyme (ACE, kininase II). Angiotensin II is the principal pressor agent of the renin-angiotensin system, with effects that include vasoconstriction, stimulation of synthesis and release of aldosterone, cardiac stimulation, and renal reabsorption of sodium. Valsartan blocks the vasoconstrictor and aldosterone-secreting effects of angiotensin II by selectively blocking the binding of angiotensin II to the AT 1 receptor in many tissues, such as vascular smooth muscle and the adrenal gland.

Its action is therefore independent of the pathways for angiotensin II synthesis. There is also an AT 2 receptor found in many tissues, but AT 2 is not known to be associated with cardiovascular homeostasis. Valsartan has much greater affinity (about 20,000-fold) for the AT 1 receptor than for the AT 2 receptor.

The primary metabolite of valsartan is essentially inactive with an affinity for the AT 1 receptor about one 200 th that of valsartan itself. Blockade of the renin-angiotensin system with ACE inhibitors, which inhibit the biosynthesis of angiotensin II from angiotensin I, is widely used in the treatment of hypertension. ACE inhibitors also inhibit the degradation of bradykinin, a reaction also catalyzed by ACE.

Because valsartan does not inhibit ACE (kininase II) it does not affect the response to bradykinin. Whether this difference has clinical relevance is not yet known. Valsartan does not bind to or block other hormone receptors or ion channels known to be important in cardiovascular regulation.

Blockade of the angiotensin II receptor inhibits the negative regulatory feedback of angiotensin II on renin secretion, but the resulting increased plasma renin activity and angiotensin II circulating levels do not overcome the effect of valsartan on blood pressure. Hydrochlorothiazide is a thiazide diuretic. Thiazides affect the renal tubular mechanisms of electrolyte reabsorption, directly increasing excretion of sodium and chloride in approximately equivalent amounts.

Indirectly, the diuretic action of hydrochlorothiazide reduces plasma volume, with consequent increases in plasma renin activity, increases in aldosterone secretion, increases in urinary potassium loss, and decreases in serum potassium. The renin-aldosterone link is mediated by angiotensin II, so co-administration of an angiotensin II receptor antagonist tends to reverse the potassium loss associated with these diuretics. The mechanism of the antihypertensive effect of thiazides is unknown.

12.2Pharmacodynamics Valsartan Valsartan inhibits the pressor effect of angiotensin II infusions. An oral dose of 80 mg inhibits the pressor effect by about 80% at peak with approximately 30% inhibition persisting for 24 hours. No information on the effect of larger doses is available.

Removal of the negative feedback of angiotensin II causes a 2- to 3-fold rise in plasma renin and consequent rise in angiotensin II plasma concentration in hypertensive patients. Minimal decreases in plasma aldosterone were observed after administration of valsartan; very little effect on serum potassium was observed. Hydrochlorothiazide After oral administration of hydrochlorothiazide, diuresis begins within 2 hours, peaks in about 4 hours and lasts about 6 to 12 hours.

Drug Interactions Hydrochlorothiazide Alcohol, barbiturates, or narcotics: Potentiation of orthostatic hypotension may occur. Skeletal muscle relaxants: Possible increased responsiveness to muscle relaxants such as curare derivatives. Digitalis glycosides: Thiazide-induced hypokalemia or hypomagnesemia may predispose the patient to digoxin toxicity.

12.3Pharmacokinetics Valsartan Valsartan peak plasma concentration is reached 2 to 4 hours after dosing. Valsartan shows bi-exponential decay kinetics following intravenous administration, with an average elimination half-life of about 6 hours. Absolut…

📦 How Supplied / Storage and Handling ~1 min read

16 HOW SUPPLIED/STORAGE AND HANDLING Valsartan and Hydrochlorothiazide Tablets USP, 80 mg/12.5 mg are supplied as pink, ovaloid, film-coated unscored tablets debossed with “845” on one side and “AN” on the other side. They are available as follows: Bottles of 30: NDC 65162-845-03 Bottles of 90: NDC 65162-845-09 Bottles of 500: NDC 65162-845-50 Bottles of 1000: NDC 65162-845-11 Valsartan and Hydrochlorothiazide Tablets USP, 160 mg/12.5 mg are supplied as red, ovaloid, film-coated, unscored tablets debossed with “846” on one side and “AN” on the other side.

They are available as follows: Bottles of 30: NDC 65162-846-03 Bottles of 90: NDC 65162-846-09 Bottles of 500: NDC 65162-846-50 Bottles of 1000: NDC 65162-846-11 Valsartan and Hydrochlorothiazide Tablets USP, 160 mg/25 mg are supplied as brown, ovaloid, film-coated, unscored tablets debossed with “847” on one side and “AN” on the other side. They are available as follows: Bottles of 30: NDC 65162-847-03 Bottles of 90: NDC 65162-847-09 Bottles of 500: NDC 65162-847-50 Bottles of 1000: NDC 65162-847-11 Valsartan and Hydrochlorothiazide Tablets USP, 320 mg/12.5 mg are supplied as light pink, ovaloid, film-coated, unscored, beveled edge tablets debossed with “848” on one side and “AN” on the other side.

They are available as follows: Bottles of 30: NDC 65162-848-03 Bottles of 90: NDC 65162-848-09 Bottles of 500: NDC 65162-848-50 Bottles of 1000: NDC 65162-848-11 Valsartan and Hydrochlorothiazide Tablets USP, 320 mg/25 mg are supplied as yellow, ovaloid, film-coated, unscored, beveled edge tablets debossed with “849” on one side and “AN” on the other side. They are available as follows: Bottles of 30: NDC 65162-849-03 Bottles of 90: NDC 65162-849-09 Bottles of 500: NDC 65162-849-50 Bottles of 1000: NDC 65162-849-11 Store at 20° to 25°C (68° to 77°F); excursions permitted between 15° to 30°C (59° to 86°F) [see USP Controlled Room Temperature].

Protect from moisture. Dispense in tight container as defined in the USP.

📋 Description ~1 min read

11 DESCRIPTION Valsartan and hydrochlorothiazide tablets, USP are a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT 1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N -(1-oxopentyl)- N -[[2'-(1 H -tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C 24 H 29 N 5 O 3 , its molecular weight is 435.52 g/mol, and its structural formula is: Valsartan, USP is almost white, hygroscopic powder.

It is practically insoluble in water, freely soluble in anhydrous ethanol and sparingly soluble in methylene chloride. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, n -butylamine, and in dimethyl formamide; sparingly soluble in methanol; and insoluble in ether, chloroform, and in dilute mineral acids.

Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2 H -1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C 7 H 8 ClN 3 O 4 S 2 , its molecular weight is 297.74 g/mol, and its structural formula is: Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan, USP and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg.

The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, hypromellose, iron oxide yellow, polyethylene glycol, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, talc and titanium dioxide. The 80 mg/12.5 mg tablets also contain FD&C Red No. 40 and ferrosoferric oxide.

The 160 mg/12.5 mg tablets also contain iron oxide red. The 160 mg/25 mg tablets also contain iron oxide red and ferrosoferric oxide. The 320 mg/12.5 mg tablets also contain iron oxide red and ferrosoferric oxide. q r

💬 Information for Patients 197 words

17 PATIENT COUNSELING INFORMATION Information for Patients Advise the patient to read the FDA-approved patient labeling ( Patient Information ). Pregnancy: Female patients of childbearing age should be told about the consequences of exposure to valsartan and hydrochlorothiazide during pregnancy. Discuss treatment options with women planning to become pregnant.

Patients should be asked to report pregnancies to their physicians as soon as possible. Symptomatic Hypotension: A patient receiving valsartan and hydrochlorothiazide should be cautioned that lightheadedness can occur, especially during the first days of therapy, and that it should be reported to the prescribing physician. The patients should be told that if syncope occurs, valsartan and hydrochlorothiazide should be discontinued until the physician has been consulted.

All patients should be cautioned that inadequate fluid intake, excessive perspiration, diarrhea, or vomiting can lead to an excessive fall in blood pressure, with the same consequences of lightheadedness and possible syncope. Potassium Supplements: A patient receiving valsartan and hydrochlorothiazide should be told not to use potassium supplements or salt substitutes containing potassium without consulting the prescribing physician. Manufactured by: Amneal Pharmaceuticals Pvt.

Ltd. Oral Solid Dosage Unit Ahmedabad 382213, INDIA Distributed by: Amneal Pharmaceuticals LLC Bridgewater, NJ 08807 Rev. 02-2019-00

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.