House Dust Mite, Dermatophagoides farinae 10000 [AU]/mL Injection, 30 mL — NDC 49643-0702-30 package photo

House Dust Mite, Dermatophagoides farinae 10000 [AU]/mL Injection, 30 mL

by Allermed Laboratories, Inc. · 30 mL in 1 VIAL, MULTI-DOSE (49643-702-30)
NDC 49643-0702-30
🏷️ FDA NDC (as labeled) 49643-702-30 billing pads the product segment with a zero
This package
Contains30 mL Pack sizes4 compare ↓
Rx only Brand On market Non-controlled
🗂️ Data synced Aug 20, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

🆔 Identity & classification

FDA NDC (as labeled) 49643-702-30
Product NDC 49643-702
11-digit billing NDC 49643070230
RxCUI 852825, 852829
UNII PR9U2YPF3Q, 57L1Z5378K
Application # BLA102212
SPL Set ID 3b19e1e4-1a28-4515-ac20-cc4a9b2d45e6
Established class (EPC) Standardized Insect Allergenic Extract
Physiologic effect Increased Histamine Release; Cell-mediated Immunity; Increased IgG Production
Chemical class Antigens, Dermatophagoides; Insect Proteins; Allergens
DEA schedule Non-controlled
Marketing category BLA
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 1986-12-24
Route CUTANEOUS, INTRADERMAL, SUBCUTANEOUS
Dosage form INJECTION
Substance DERMATOPHAGOIDES FARINAE
Biologic (Purple Book) 351(a)
Why two NDCs? The FDA registers this code as 49643-702-30 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 49643-0702-30. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Standardized Insect Allergenic Extract class.

Pharmacologic class Standardized Insect Allergenic Extract
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerAllermed Laboratories, Inc.
FDA applicationBLA102212 (BLA)
Labeler code49643
First marketedDec 1986
Product typeHuman Prescription Drug
Portfolio199 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • 0.53 g / 1 mL UNII PDC6A3C0OX
    Glycerin is a clear, thick liquid derived from plant oils or fats. It acts as a humectant to retain moisture, a sweetener, and a solvent in medications.
  • 0.004 g / 1 mL UNII 339NCG44TV
    Phenol is a chemical compound derived from coal tar or petroleum. It serves as a preservative and antimicrobial agent in medicines, helping prevent bacterial and fungal growth to keep the product stable and safe during storage.
  • 0.00125 g / 1 mL UNII 8MDF5V39QO
    A white powder form of baking soda that acts as a buffer and pH regulator in medicines. It helps maintain the right acid-base balance and may aid tablet disintegration.
  • 0.0025 g / 1 mL UNII 451W47IQ8X
    Sodium chloride is common table salt. It's used in medicines as a buffer to maintain proper pH, as a filler to add bulk, or to adjust the osmotic balance in liquid formulations.
  • UNII 059QF0KO0R
    Water is a liquid solvent that dissolves and mixes ingredients together in liquid medicines, syrups, and injections. It helps distribute the active drug evenly throughout the product.

5 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMedingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer eachPer package
Retail pharmacies payNADAC · weekly Not in the retail survey — common for institutional, discontinued, or low-volume packs.
Medicaid paysCMS SDUD · 12 mo No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · quarterly No Part D plan price is available for this NDC in our data.
ℹ️
No price is published for this exact package yet. CMS surveys NADAC per package size, so a different pack of the same drug often has one.
Try another pack size: 5 ml 10 ml 50 ml
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Standardized Mite D. farinae 10000 [AU]/mL 00268-0275-10 ALK-Abello, 10 ml FDA listed
Standardized Mite D. farinae 10000 [AU]/mL 00268-7000-06 ALK-Abello, 5 ml FDA listed
Standardized Mite Dermatophagoides farinae 10000 [AU]/mL 22840-0034-03 Greer 5 ml FDA listed
House Dust Mite, Dermatophagoides farinae 10000 [AU]/mLthis 49643-0702-30 Allermed 30 ml FDA listed
Standardized Mite, Dermatophagoides farinae, Bulk, 10000 AU per mL 10000 [AU]/mL 65044-6723-02 Jubilant 10 ml FDA listed
About this product: this is a biologic. Biologics don't have small-molecule generics — competition comes from FDA-licensed biosimilars (shown above), not generics.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

Availability & biosimilar status

🏛️
1974
First FDA approval
Mar 1974
📍
2026
Currently FDA-listed
52 years listed
🧬
·
Biosimilars
see Purple Book
🧬Biologic — competition comes from biosimilars

Biologics have no small-molecule generics; biosimilar competition is tracked in the FDA Purple Book.

Where does this data come from?
Patents and exclusivity from the FDA Purple Book (biologics), refreshed from public FDA data. Biosimilar launch timing is an estimate, not a guarantee.

🔬 Reported adverse events (FAERS)

Read carefully: FAERS reports are voluntary and unverified. Counts are not incidence, do not establish causation, are subject to reporting bias, and cannot be used to compare one drug to another. Shown for signal context only. Reports for House Dust Mite, Dermatophagoides farinae — the ingredient across all brands.

Top reported reactions

Chest Discomfort3
Dizziness3
Wheezing3
Presyncope2
Urticaria2
Asthenia1
Blister1

Reporter sex

10 reports
Male · 20%
Female · 80%
Reports over time (by year) — tap or hover for the count & year
2022 2023 2024 2026 5 0
Most recent year is provisional (FAERS lags ~3 months).
Where does this data come from?
Adverse-event reports from the FDA Adverse Event Reporting System (FAERS) via openFDA. FAERS reports are voluntary and unverified — counts are not incidence and don’t establish causation.

📦 Packaging — all sizes for this product

Package NDCDescription Marketing startStatus
49643-0702-05 5 mL in 1 VIAL, MULTI-DOSE (49643-702-05) 1986-12-24 Active
49643-0702-10 10 mL in 1 VIAL, MULTI-DOSE (49643-702-10) 1986-12-24 Active
49643-0702-30 You're viewing this 30 mL in 1 VIAL, MULTI-DOSE (49643-702-30) 1986-12-24 Active
49643-0702-50 50 mL in 1 VIAL, MULTI-DOSE (49643-702-50) 1986-12-24 Active

You're viewing one of 4 pack sizes for this product.

Pack size FAQ

What quantity is in NDC 49643-0702-30?
NDC 49643-0702-30 contains 30 mL — 30 ml in 1 vial, multi-dose.
What is the difference between NDC 49643-0702-30 and NDC 49643-0702-05?
Both are House Dust Mite, Dermatophagoides farinae 10000 [AU]/mL Injection — the drug itself is identical. NDC 49643-0702-30 is the 30 mL package, while NDC 49643-0702-05 is the 5 ml package.
What NDC number is used to bill for this package of House Dust Mite, Dermatophagoides farinae 10000 [AU]/mL Injection?
Bill NDC 49643-0702-30 — the 11-digit billing format is 49643070230. Pharmacy and medical claims use the 11-digit form; the FDA label may print a shorter form of the same code.

🧭 About this NDC listing & data coverage

Finished prescription product
What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos ✓ Available
Inactive ingredients (structured) ✓ Available
NADAC pharmacy acquisition price (CMS) — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey.
Orange Book / therapeutic-equivalence data — Not published for this NDC Applies only to products approved under an NDA/ANDA; many listings are out of scope.
HCPCS J-code billing crosswalk — Not published for this NDC Most self-administered / retail products have no J-code — that is normal.
Medicaid utilization (CMS SDUD) — Not published for this NDC CMS reports utilization only for NDCs with Medicaid claims above its privacy threshold.
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Why is there no price listed?
The pricing shown on our NDC pages comes from CMS NADAC, a voluntary survey of retail community pharmacy invoices. CMS does not publish a NADAC for every NDC — packages outside the retail survey (institutional and hospital products, bulk packages, discontinued items, and many OTC items) may never receive one. A missing price reflects the survey's scope, not this product's actual cost, and does not mean the product is free or unavailable.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The FDA registers it as 49643-702-30, which is what is printed on the packaging and shown on DailyMed. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero: 49643-0702-30, written without dashes as 49643070230. The Identity section at the top of this page lists every form of this code.
What do the three segments of this NDC mean?
In 49643-0702-30, the first segment (49643) is the labeler code FDA assigned to Allermed Laboratories, Inc.; the middle segment (0702) identifies this specific product — its ingredient, strength, and dosage form; and the last segment (30) identifies this exact package size and type. Together they name one specific package of one specific product.
Is this package still being marketed?
Yes, per the latest FDA NDC Directory data on this page: this package is listed as actively marketed, with no marketing end date reported by Allermed Laboratories, Inc.. Listing status can change — the directory data on this page refreshes weekly.
Does this product come in other package sizes?
Yes — the FDA directory lists 3 other package presentations of this same product, including 5 ml (49643-0702-05), 10 ml (49643-0702-10), 50 ml (49643-0702-50). Each has its own NDC and its own page — see the package list near the top of this page.
Who lists this product with the FDA?
Allermed Laboratories, Inc. is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🚨 Boxed Warning ~1 min read

WARNINGS This product is intended for use by physicians who are experienced in the administration of allergenic extracts or for use under the guidance of an allergy specialist. The initial dose must be based on skin testing as described in the dosage and administration section of this insert. Patients being switched from alum-absorbed or other types of precipitated extracts or non-standardized extracts to this extract should be started as though they were coming under treatment for the first time.

Patients should be instructed to recognize adverse reaction symptoms and cautioned to contact the physician's office if symptoms occur. As with all allergenic extracts, severe systemic reactions may occur and in certain individuals, especially steroid dependent/liable asthmatics, these reactions maybe life-threatening or cause death (11). Patients should be observed for at least 20 minutes following treatment.

Emergency measures as well as personnel trained in their use should be immediately available in the event of a life-threatening reaction. Patients being switched from one lot of extract to another from the same manufacturer should have the dose reduced to 25 percent. Patients receiving beta-blocking drugs may be refractive to the usual dose of epinephrine, in the event that epinephrine is required to control an adverse allergic reaction to this product.

This product should never be injected intravenously. See also the WARNINGS, and ADVERSE REACTIONS sections below. Serious adverse reactions to this product should be reported to MEDWATCH, Food and Drug Administration, 5600 Fishers Lane, MD 20852-9787.

Telephone 1-800-822-7967 or www.vaers.hhs.gov.

🎯 Indications and Usage 77 words

INDICATIONS AND USAGE Standardized mite extract is indicated for use in the diagnosis of patients with a history of allergy to mites or house dust and for the treatment of patients with a history of mite allergy who have established sensitivity to mites by diagnostic skin testing. The use of mite extract for the above purposes should be made only by physicians with special familiarity and knowledge of allergy as described in a standard allergy textbook (10).

⏱️ Dosage and Administration ~3 min read

DOSAGE AND ADMINISTRATION Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. The product should be discarded if discoloration or particles are observed. DIAGNOSTIC USE: Percutaneous Tests : The skin test concentration of 10,000 AU/mL in dropper vials is used for scratch or prick-puncture testing.

Puncture tests performed with D. farinae extract on 5 persons sensitive to mite showed a mean diameter wheal of 8.8 mm ± 1.8 mm and mean diameter erythema of 39.2 mm ± 5.3 mm. Puncture tests with D. pteronyssinus extract on 10 persons sensitive to mite showed a mean diameter wheal of 7.8 mm ± 4.1 mm and mean erythema of 33.7 mm ± 12.0 mm. Intradermal Tests : Extract for intradermal testing should be prepared by diluting the 10,000 AU/mL stock concentrate in bulk vials with sterile saline with or without human serum albumin.

Intradermal skin tests (0.05 mL) in persons highly sensitive to mite showed the following results: Table 1 AU/mL to elicit 50 mm sum of diameter erythema reaction Allergen No. of Persons Mean Range D. farinae 5 0.0040 0.0013-0.0124 D. pteronyssinus 10 0.0031 0.0001-0.1416 Intradermal tests should only be performed after a scratch or prick-puncture test has been administered with a negative result. Patients who do not react to a valid scratch or prick-puncture test should be tested intradermally with 0.02 to 0.05 mL of a 10 AU/mL (1:1,000 v/v of the 10,000 AU/mL concentrate).

If this test is negative, a second intradermal test may be performed using a 100 AU/mL (1:100 v/v dilution of 10,000 AU/mL concentrate). Skin tests are graded in terms of the wheal and erythema response noted at 15 to 20 minutes. Wheal and erythema size may be recorded by actual measurement of the extent of both responses.

THERAPEUTIC USE: The dosage of mite extract administered by subcutaneous injection is highly individualized and varies according to the degree of sensitivity of the patient, his clinical response and tolerance to the extract administered during the early phases of an injection regimen. In patients who appear to be highly sensitive by history and skin test, the initial dose of the extract should be 0.05 mL of a

0.1AU/mL dilution or as established by skin test titration. The amount of allergenic extract is increased at each injection by not more than 50% - 100% of the previous amount, and the next increment is governed by the response to the last injection. Large local reactions which persist for longer than 24 hours are generally considered an indication for repeating the previous dose or reducing the dose.

Any evidence of systemic reaction is an indication for a significant reduction (at least 50%) in the subsequent dose. The upper limits of dosage have not been established; however, doses larger than 0.2 mL of the concentrate may be painful due to the glycerin content of the extract. The optimal interval between doses of mite extract has not been definitely established.

However, as is customarily practiced, injections are given one or two times per week until the maintenance dose of extract is reached. At this time, the injection interval may be increased to 2 weeks, then to 3 weeks and finally to 4 weeks. If the patient does not return for 6 to 8 weeks after the last injection, the dose should be reduced to 25% of the last dose.

If longer than 8 weeks, a dose reduction of one, two or three dilutions may be made depending on a consideration of the components and the patient's sensitivity The dosage and the interval between injections may need to be modified according to the clinical response of the patient. When switching patients to fresh extract, the initial dose should be reduced to one-quarter (25%) of the previous dose. The usual duration of treatment has not been established.

A period of three to five years of injection therapy constitutes an average course of treatment. Children and older age patients appear t…

Contraindications 145 words

CONTRAINDICATIONS Injections of mite extract should not be administered in the presence of diseases characterized by a bleeding diathesis. Immunotherapy should not be started in patients until a specific diagnosis of Type I allergy to mite is made by a physician based on skin testing with this product. Other contraindications include: EXTREME SENSITIVITY TO MITE: Determined from previous anaphylaxis following skin testing, immunotherapy, or natural exposure.

AUTOIMMUNE DISEASE: Individuals with autoimmune disease maybe at risk, due to the possibility of routine immunizations exacerbating symptoms of the underlying disease. MYOCARDIAL INFARCTION: Patients who have experienced a recent myocardial infarction may not be able to tolerate immunotherapy. The benefit-to-risk ratio must be carefully evaluated.

CHILDREN WITH NEPHROTIC SYNDROME: Children with nephrotic syndrome require careful consideration and probably should not receive immunotherapy due to a variety of seemingly unrelated events that may cause an exacerbation of nephrotic disease.

⚠️ Warnings ~1 min read

WARNINGS Concentrated extract must be diluted with sterile diluent prior to first use on a patient for treatment or intradermal testing. All concentrates of allergenic extract are manufactured to assure high potency and therefore have the ability to cause serious local and systemic reactions, including death in sensitive patients (11). Patients should be informed of this risk and precautions should be discussed prior to initiating immunotherapy (see PRECAUTIONS below).

Allergenic extract should be temporarily withheld from patients or the dose adjusted downward if any of the following conditions exist: 1) severe symptoms of rhinitis and/or asthma; 2) infection or flu accompanied by fever; 3) exposure to excessive amounts of clinically relevant allergen prior to a scheduled injection. The dosage must be reduced when starting a patient on fresh standardized mite extract or when transferring a patient from non-standardized or modified extract to standardized extract, even though the labeled strength of the old and new vials may be the same.

This is necessary due to a loss of extract potency during storage in the physician's office. The mite allergen content of old and new extract may be compared and adjusted by dosage reduction and/or dilution before the new extract is administered. The amount of new extract given should not exceed 25% of the last dose given from the old vial, assuming both extracts contain comparable amounts of mite allergen.

Any evidence of a local or generalized reaction requires a reduction in dosage during the initial stages of immunotherapy, as well as during maintenance therapy. Beta-blocking drugs may make patients refractory to the usual dose of epinephrine, in the event epinephrine is required to treat an adverse allergic reaction.

🤒 Adverse Reactions ~2 min read

ADVERSE REACTIONS Adverse systemic reactions usually occur within minutes and consist primarily of allergic symptoms such as generalized skin erythema, urticaria, pruritus, angioedema, rhinitis, wheezing, laryngeal edema and hypotension. Less commonly, nausea, emesis, abdominal cramps, diarrhea and uterine contractions may occur. Severe reactions may cause shock and loss of consciousness.

Fatalities have occurred rarely (11). Systemic reactions occur with varying frequency in different clinics. To some extent, the reaction rate is related to the type and dose of administered extract and to the degree of sensitivity of the patient.

Despite all precautions, occasional reactions are unavoidable. Reports from regulatory authorities in Sweden to the Center for Biologics Evaluation and Research (CBER) indicated that several deaths have been associated with the use of mite extracts. CBER was subsequently informed that these deaths may have been related to use by physicians or other health professionals untrained in the administration of potent allergens, rather than a product defect.

It should be noted that anaphylaxis and deaths following the injection of mite and other extracts also have been reported by the British Committee on Safety in Medicine in the British Medical Journal, 293:943, 1986. Local reactions consisting of erythema, itching, swelling, tenderness and sometimes pain may occur at the injection site. These reactions may appear within a few minutes to hours and persist for several days.

Local cold applications and oral antihistamines may be effective treatment. For marked and prolonged local reactions, steroids may be helpful. The treatment of systemic allergic reactions is somewhat dependent upon the symptom complex.

Epinephrine hydrochloride 1:1,000 aqueous, in an adult dose of 0.3 - 0.5 mL (or 0.01 mL per kg. for children) administeredsubcutaneously in the opposite arm is the immediate treatment of choice. A tourniquet should be placed above the site of the extract injection if the injection was done on the extremities. Antihistamines may offer relief of recurrent urticaria, associated skin reactions and gastrointestinal symptoms.

Persistent wheezing may necessitate intravenous aminophylline treatment. For profound shock and hypotension, intravenous fluids, vasopressors and oxygen also may be needed. Maintenance of an open airway is critical if upper airway obstruction is present.

Corticosteroids may provide benefit if symptoms are prolonged or recurrent.

🆘 Overdosage 67 words

OVERDOSAGE A strong local reaction to the injection of extract may be treated with oral antihistamines and the local application of a cold compress. The dosage must be reduced and additional extract must not be given until all evidence of the reaction has disappeared. A systemic reaction following the injection of extract must be treated immediately with Epinephrine hydrochloride 1:1,000 aqueous (see Adverse Reactions, paragraph 4 above).

🧬 Clinical Pharmacology 147 words

CLINICAL PHARMACOLOGY The mechanism for the pharmacologic action of allergenic extracts used diagnostically is based on the liberation of histamine and other substances when the allergen reacts with IgE antibody attached to mast cells. The mechanism of the therapeutic effect is not well understood and further research is required to substantiate current hypotheses. Mites belonging to the genus Dermatophagoides are found in approximately 80% of house dust samples throughout the world (2,3).

D. farinae is common in much of the United States (3), although D. pteronyssinus is predominant in certain coastal regions and both species are commonly found in homes (4,5). The diagnosis of mite allergy is established by the allergy history and skin test reactivity (6,7). Immunotherapy with mite extract has been studied by several investigators.

It is generally believed that hyposensitization with this product is helpful in reducing symptoms associated with house dust allergy (8,9).

📦 How Supplied / Storage and Handling 147 words

HOW SUPPLIED Extract of D. farinae and D. pteronyssinus containing 5,000 and 10,000 Allergy Units per mL is supplied in 50% glycerol v/v in 10 mL, 30 mL and 50 mL vials. Extract containing 10,000 Allergy Units per mL is supplied in 50% glycerol v/v in dropper vials for scratch or prick-puncture testing. An equal v/v mixture of the two mites is offered in 10, 30 and 50 mL vial sizes at a concentration of 2,500 AU/mL or 5,000 AU/mL for each mite.

See DESCRIPTION above for the complete list of the active and inactive ingredients of this product. Extract of D. farinae and D. pteronyssinus may be diluted in sterile buffered saline containing 0.4% phenol or in sterile buffered saline containing human serum albumin and 0.4% phenol. STORAGE AND HANDLING Extract should be stored at 2-8°C since higher temperatures may adversely affect stability.

Do not freeze.

📋 Description ~1 min read

DESCRIPTION Mite extract is a sterile solution containing the extractables of mite whole bodies in 0.25% sodium chloride, 0.125% sodium bicarbonate, 50% glycerol by volume and 0.4% phenol as a preservative. The mites are grown on a medium of yeast and pork and are handled and cleaned in a manner to remove more than 99% of the food medium. The medium contains no material of human origin.

This extract may be administered by the scratch, prick-puncture, or intradermal methods of skin testing for diagnostic purposes and subcutaneously for therapeutic purposes as directed under Dosage and Administration. Intradermal skin tests in patients who were puncture test positive (Sum E ≥ 40 mm) to either D. farinae or D. pteronyssinus extract were performed with extracts of the mite food medium obtained from the same supplier. The results, submitted to the FDA by several manufacturers, were as follows: By intradermal testing, there was 1 positive (Sum E ≥ 20 mm) in 44 individuals at an estimated 1% level of medium content (approximately the same as contained in the mite extract).

At a ten-fold increase (estimated 10% medium content), 4 positives in 40 individuals were observed. Two of the individuals who were skin test positive to the mite extract and who also were skin test positive to the medium extract were also skin test positive to an extract of yeast (Saccharomyces sp.) when tested by the puncture method. The extract is standardized by comparing its relative potency by ELISA competition to a U.S. reference mite extract available from the Center for Biologics Evaluation and Research, U.S.

Food and Drug Administration. The U.S. reference extract has been assigned a potency of 10,000 AU/mL based on quantitative skin testing (1).

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.