HomeNDC LookupIngredientsAmlodipine And Valsartan › 62332-0205-30
Amlodipine and Valsartan 5 mg; 160 mg Tablet, Film Coated, 30-count — NDC 62332-0205-30 package photo

Amlodipine and Valsartan 5 mg; 160 mg Tablet, Film Coated, 30-count

by Alembic Pharmaceuticals Inc. · 30 TABLET, FILM COATED in 1 BOTTLE (62332-205-30)
NDC 62332-0205-30
🏷️ FDA NDC (as labeled) 62332-205-30 billing pads the product segment with a zero
This package
Contains30-count Cost per ea$0.2758 NADAC Per package$8.27 / 30 tablets Pack sizes5 compare ↓
Also priced by: Medicaid pays $0.6665/unit · Part D plans $0.5923/unit — full pricing hub ↓
Rx only Generic On market Non-controlled
🗂️ Data synced Sep 10, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

🆔 Identity & classification

FDA NDC (as labeled) 62332-205-30
Product NDC 62332-205
11-digit billing NDC 62332020530
NCPDP billing unit EA — each (per item)
UNII 864V2Q084H, 80M03YXJ7I
Application # ANDA202713
SPL Set ID 6894085d-6076-4e2e-8105-a9bbb0bd93ef
Established class (EPC) Angiotensin 2 Receptor Blocker
Mechanism of action Angiotensin 2 Receptor Antagonists
DEA schedule Non-controlled
Marketing category ANDA
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 2016-12-01
Route ORAL
Dosage form TABLET, FILM COATED
Substance AMLODIPINE BESYLATE; VALSARTAN
GPI-14 36993002100310
GPI class amLODIPine Besylate-Valsartan
GCN Seq No 062180
GCN 97962
HICL code 034433
Ingredient (HICL) Amlodipine Besylate/Valsartan
HIC1 code A
Therapeutic class — broad (HIC1) Cardiovascular System
HIC2 code A4
Therapeutic class — intermediate (HIC2) Antihypertensives
HIC3 code A4H
Therapeutic class — specific (HIC3) Angiotensin Receptor Blockr-Calcium Channel Blockr
AHFS code 24:12.92.00
AHFS class Vasodilating Agents, Miscellaneous
FDB label name AMLODIPINE-VALSARTAN 5-160 MG
FDB brand name Amlodipine-Valsartan
Legend status F — Federal legend — prescription drug or device
TE code (Orange Book) AB · RLD · RS
Why two NDCs? The FDA registers this code as 62332-205-30 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 62332-0205-30. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Dihydropyridine Calcium Channel Blocker class.

Pharmacologic class Dihydropyridine Calcium Channel Blocker, Calcium Channel Blocker
Drug family (ATC) Renin-inhibitors, ACE inhibitors and calcium channel blockers, Dihydropyridine derivatives
How it works Calcium Channel Antagonists, Cytochrome P450 3A Inhibitors
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerAlembic Pharmaceuticals Inc.
Application holderALEMBIC PHARMACEUTICALS LTD
FDA applicationANDA202713 (ANDA)
Labeler code62332
First marketedDec 2016
Product typeHuman Prescription Drug
Portfolio491 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Label name AMLODIPINE-VALSARTAN 5-160 MG Ingredient Amlodipine Besylate/Valsartan
📗 Our plain-language guide HelloPharmacist
  • This tablet combines two different blood pressure medicines — amlodipine and valsartan — into a single pill. They each lower blood pressure in a different way, and together they're...
  • What is this medicine actually for, and why am I taking two drugs in one pill?
  • No — you can take amlodipine and valsartan tablets (including Exforge) with or without food. Pick whatever works best for your routine and try to take it at the same time every day...
  • Does it matter if I take this with food or on an empty stomach?
📖 Read our full Amlodipine / Valsartan guide →
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

💊 What it looks like

Color Yellow
ShapeOval
ImprintL301
Size21 mm
ScoringNot scored
One label can cover several strengths, so colors may be combined — always confirm a loose pill against the dispensed prescription label or a pharmacist.
Where does this data come from?
Physical description (imprint, shape, color, scoring, coating) from this product’s FDA Structured Product Labeling (SPL), mirrored from DailyMed / openFDA.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • UNII 2S7830E561
    Crospovidone is a synthetic polymer derived from povidone. It acts as a disintegrant, helping the tablet or capsule break apart quickly in the stomach so the active ingredient can be absorbed.
  • UNII 1K09F3G675
    Ferric oxide red is an inorganic iron compound used as a colorant in medicines. It gives tablets, capsules, or other dosage forms a red or reddish tint for identification and appearance.
  • UNII EX438O2MRT
    Ferric oxide yellow is a naturally occurring iron compound used as a colorant in medications. It gives tablets, capsules, and other forms a yellow or golden hue for identification and appearance.
  • UNII 0WZ8WG20P6
    Hypromellose 2910 is a plant-based cellulose derivative that acts as a thickener, binder, and film-coating agent. It helps control how quickly the medicine dissolves and protects the tablet or capsule from moisture and light.
  • UNII 70097M6I30
    Magnesium stearate is a salt made from magnesium and stearic acid, a fatty substance. It's used in tablets and capsules as a lubricant and glidant to help ingredients flow smoothly during manufacturing and prevent sticking.
  • UNII OP1R32D61U
    Microcrystalline cellulose is a purified form of cellulose, a natural fiber from plant sources. It acts as a binder and filler in tablets and capsules, helping hold ingredients together and give the medicine its shape and size.
  • UNII Q662QK8M3B
    Polyethylene glycol 8000 is a synthetic polymer made from ethylene oxide. It acts as a binder and filler in tablets and capsules, helping hold ingredients together and add bulk to the medicine.
  • UNII ETJ7Z6XBU4
    Silicon dioxide is a naturally occurring mineral used as a glidant and anti-caking agent. It helps powder ingredients flow smoothly and prevents clumping during manufacturing and storage.
  • UNII 7SEV7J4R1U
    A powder made from a naturally occurring mineral. In medicines, talc works as a glidant and anti-caking agent, helping tablets and capsules flow smoothly during manufacturing and preventing clumping.
  • UNII 15FIX9V2JP
    Titanium dioxide is a bright white mineral powder commonly used as a colorant and opacifying agent. It makes pills and tablets white or lighter in color and helps make coatings non-transparent.

10 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMedingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer eaPer package
Retail pharmacies payNADAC · weekly $0.276 $8.27 / 30 tablets
Medicaid paysCMS SDUD · 12 mo $0.6665 $20.00 / 30 tablets
Medicare drug plans payPart D · Q2 2026 $0.5923 $17.77 / 30 tablets
NADAC price history (per ea) — tap or hover for the price & month
Dec 2021 Jul 2022 Dec 2025 Aug 2026 $0.528 $0.276
▼ Down 37% over the last 24 months.
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Amlodipine And Valsartan 5 mg/1; 160 mg 00378-1721-93 Mylan 30 tablets $0.276 AB Availability likely
Amlodipine and Valsartan 5 mg/1; 160 mg 23155-0844-03 Heritage 30 tablets $0.276 AB Availability likely
amlodipine and valsartan 5 mg/1; 160 mg 33342-0279-07 Macleods 30 tablets $0.276 AB Availability likely
Amlodipine and Valsartan 5 mg/1; 160 mgthis 62332-0205-30 Alembic 30 tablets $0.276 AB Availability likely
Exforge 5 mg/1; 160 mg 00078-0488-15 Novartis 30 tablets $10.651 AB Availability likely +3762%
Amlodipine And Valsartan 5 mg/1; 160 mg 43386-0083-03 Lupin 30 tablets AB FDA listed
Amlodipine and Valsartan 5 mg/1; 160 mg 46708-0458-10 Alembic 100 tablets AB FDA listed
Amlodipine and Valsartan 5 mg/1; 160 mg 51407-0771-30 Golden 30 tablets AB FDA listed
Amlodipine and Valsartan 5 mg/1; 160 mg 64380-0214-01 Strides 30 tablets AB Discontinued
Amlodipine and valsartan 5 mg/1; 160 mg 65862-0737-03 Aurobindo 10 tablets AB FDA listed
Amlodipine and Valsartan 5 mg/1; 160 mg 68180-0764-02 Lupin 500 tablets FDA listed
About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

Availability & generic status

🏛️
2016
On the market since
Dec 2016
📍
2026
Currently FDA-listed
10 years listed
🔓
·
Generic on the market
this product is a generic
This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

🗺️ Medicaid utilization & spend

📍 This exact package only: Medicaid data is reported per full 11-digit NDC — labeler, product and pack size — so every number here is for 62332-0205-30, not the drug overall. Other pack sizes report separately.
💊 Pharmacy benefit only: These are Medicaid outpatient pharmacy claims, billed by NDC. They exclude the medical benefit — clinic- or hospital-administered drugs billed under HCPCS J-codes — so drugs used mostly that way (e.g. Avastin, Lucentis, Keytruda) can look low or missing here. That’s expected, not an error.
📅 Q1 2025 – Q4 2025 · 4 quarters of data
ⓘ The newest quarter is usually incomplete when first published; states restate recent quarters in later CMS releases, so the latest figures typically revise upward. State coverage-policy changes can also shift quarter-to-quarter totals.
Prescriptions last 4 qtrs
4K
Units reimbursed last 4 qtrs
192.8K
Gross reimbursed last 4 qtrs
$128.5K
Avg / prescription
$32.12
Avg / unit
$0.6665
Latest quarter Q4 2025
871Rx
Medicaid pays / ea
$0.6665
gross reimbursed
vs
NADAC / ea
$0.2758
acquisition cost
=
Spread
+$0.3907
+142% vs cost
What Medicaid paid per ea (before rebates; includes the pharmacy’s dispensing fee) compared with NADAC — the average price pharmacies pay to buy the drug. A positive spread means Medicaid reimbursed more than the purchase price, before manufacturer rebates.
Fee-for-service vs managed care
44% FFS 56% MCO
Fee-for-service · 1,761 Rx Managed care · 2,239 Rx
State Medicaid map
Alaska: 1,710 units · 233 per 100k residents AK Maine: no data reported ME Washington: no data reported WA Idaho: no data reported ID Montana: no data reported MT North Dakota: no data reported ND Minnesota: 7,085 units · 123 per 100k residents MN Wisconsin: 1,373 units · 23.2 per 100k residents WI Michigan: 6,945 units · 69.2 per 100k residents MI New York: 27,943 units · 143 per 100k residents NY Vermont: no data reported VT New Hampshire: no data reported NH Oregon: 720 units · 17.0 per 100k residents OR Nevada: no data reported NV Wyoming: no data reported WY South Dakota: no data reported SD Iowa: no data reported IA Illinois: no data reported IL Indiana: 870 units · 12.7 per 100k residents IN Ohio: 12,821 units · 109 per 100k residents OH Pennsylvania: 7,020 units · 54.2 per 100k residents PA New Jersey: 480 units · 5.2 per 100k residents NJ Massachusetts: no data reported MA California: 33,642 units · 86.3 per 100k residents CA Utah: no data reported UT Colorado: 3,000 units · 51.0 per 100k residents CO Nebraska: no data reported NE Missouri: 1,170 units · 18.9 per 100k residents MO Kentucky: 4,689 units · 104 per 100k residents KY West Virginia: 1,318 units · 74.5 per 100k residents WV Virginia: 11,735 units · 135 per 100k residents VA Maryland: 4,605 units · 74.5 per 100k residents MD Connecticut: 7,065 units · 195 per 100k residents CT Rhode Island: no data reported RI Arizona: 3,240 units · 43.6 per 100k residents AZ New Mexico: no data reported NM Kansas: no data reported KS Arkansas: no data reported AR Tennessee: 5,296 units · 74.3 per 100k residents TN North Carolina: 19,958 units · 184 per 100k residents NC South Carolina: 4,947 units · 92.1 per 100k residents SC Delaware: 330 units · 32.0 per 100k residents DE Oklahoma: 4,890 units · 121 per 100k residents OK Louisiana: 7,965 units · 174 per 100k residents LA Mississippi: 600 units · 20.4 per 100k residents MS Alabama: 1,958 units · 38.3 per 100k residents AL Georgia: 331 units · 3.0 per 100k residents GA D.C.: no data reported DC Hawaii: no data reported HI Texas: 4,702 units · 15.4 per 100k residents TX Florida: 4,386 units · 19.4 per 100k residents FL
Units reimbursed · per 100k residents
3.0233
gray = no data reported
Colors are per 100,000 residents, so big states don’t automatically dominate. Tap or hover a state for its actual totals.
Tap or hover a state
…for its Medicaid breakdown
🏆 Top states by units · per 100k residents
1 Alaska 233 /100k
2 Connecticut 195 /100k
3 North Carolina 184 /100k
4 Louisiana 174 /100k
5 New York 143 /100k
6 Virginia 135 /100k
7 Minnesota 123 /100k
8 Oklahoma 121 /100k
National units — by quarter
💵 About the dollar figures: “reimbursed” is what Medicaid paid pharmacies before confidential manufacturer rebates, so the program’s real net cost is lower than these numbers. Fee-for-service and managed-care claims are combined unless split above. Source: CMS State Drug Utilization Data; per-100k rates use 2023 Census population estimates.

💊 Medicaid utilization by pack size

Medicaid (SDUD) totals over the four most recent reported quarters for every package size of this drug — handy when a specific package (e.g. a starter/titration pack) carries little or no Medicaid volume on its own.
30 tablets this page62332-0205-30 4,000 Rx · $128,492
90 tablets62332-0205-90 3,423 Rx · $113,856
100 tablets62332-0205-10 No Medicaid data
100 tablets62332-0205-31 No Medicaid data
500 tablets62332-0205-71 No Medicaid data
Drug total (last 4 qtrs): 7,423 Rx · 367,162 units · $242,348 gross reimbursed
Tap a pack size to open its page. Source: CMS State Drug Utilization Data, last 4 quarters.

📦 Packaging — all sizes for this product

Package NDCDescription Per unit Per pack Marketing startStatus
62332-0205-10 100 TABLET, FILM COATED in 1 CARTON (62332-205-10) 2016-12-01 Active
62332-0205-30 You're viewing this 30 TABLET, FILM COATED in 1 BOTTLE (62332-205-30) $0.2758 / ea $8.27 2016-12-01 Active
62332-0205-31 100 TABLET, FILM COATED in 1 BOTTLE (62332-205-31) 2016-12-01 Active
62332-0205-71 500 TABLET, FILM COATED in 1 BOTTLE (62332-205-71) 2016-12-01 Active
62332-0205-90 90 TABLET, FILM COATED in 1 BOTTLE (62332-205-90) $0.2758 / ea $24.82 2016-12-01 Active

This pack has the lowest per-ea cost of the 2 priced pack sizes ($0.2758 NADAC).

In Medicaid, this is the most-dispensed pack of this product — about 54% of fills over the last four reported quarters. See all packs ↓

Pack size FAQ

What quantity is in NDC 62332-0205-30?
NDC 62332-0205-30 is a 30-count package — 30 tablet, film coated in 1 bottle.
What is the difference between NDC 62332-0205-30 and NDC 62332-0205-90?
Both are Amlodipine and Valsartan 5 mg; 160 mg Tablet, Film Coated — the drug itself is identical. NDC 62332-0205-30 is the 30-count package, while NDC 62332-0205-90 is the 90 tablets package.
What NDC number is used to bill for this package of Amlodipine and Valsartan 5 mg; 160 mg Tablet, Film Coated?
Bill NDC 62332-0205-30 — the 11-digit billing format is 62332020530. Pharmacy and medical claims use the 11-digit form; the FDA label may print a shorter form of the same code.

Prices are the latest CMS NADAC pharmacy acquisition cost per NDC; per-pack figures are per-unit × pack quantity, shown only when the pack is denominated in the same measure NADAC prices.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🚨 Boxed Warning 78 words

WARNING: FETAL TOXICITY When pregnancy is detected, discontinue amlodipine and valsartan tablets as soon as possible. (5.1) Drugs that act directly on the renin-angiotensin system can cause injury and death to the developing fetus. (5.1) WARNING: FETAL TOXICITY See full prescribing information for complete boxed warning.

When pregnancy is detected, discontinue amlodipine and valsartan tablets as soon as possible. (5.1) Drugs that act directly on the renin-angiotensin system can cause injury and death to the developing fetus. (5.1)

🎯 Indications and Usage ~3 min read

1 INDICATIONS AND USAGE Amlodipine and valsartan tablets, USP are the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure: In patients not adequately controlled on monotherapy (1) As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.

1.1Hypertension Amlodipine and valsartan tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including amlodipine and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs.

There are no controlled trials demonstrating risk reduction with amlodipine and valsartan tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals.

For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits.

The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.

Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine and valsartan tablets are indicated for the treatment of hypertension.

Amlodipine and valsartan tablets may be used in patients whose blood pressure is not adequately controlled on either monotherapy. Amlodipine and valsartan tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of amlodipine and valsartan tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks including whether the patient is likely to tolerate the lowest dose of amlodipine and valsartan tablets.

Patients with stage 2 hypertension (moderate or severe) are at a relatively higher risk for cardiov…

⏱️ Dosage and Administration ~2 min read

2 DOSAGE AND ADMINISTRATION General Considerations : Majority of effect attained within 2 weeks (2.1) May be administered with other antihypertensive agents (2.1) Hypertension May be used as add-on therapy for patients not controlled on monotherapy (2.2) Patients who experience dose-limiting adverse reactions on monotherapy may be switched to amlodipine and valsartan tablets containing a lower dose of that component (2.2) May be substituted for titrated components (2.3) When used as initial therapy: Initiate with 5/160 mg, then titrate upwards as necessary to a maximum of 10/320 mg once daily (2.4)

2.1General Considerations Dose once daily. The dosage can be increased after 1 to 2 weeks of therapy to a maximum of one 10/320mg tablet once daily as needed to control blood pressure. The majority of the antihypertensive effect is attained within 2 weeks after initiation of therapy or a change in dose. Amlodipine and valsartan tablets may be administered with other antihypertensive agents.

2.2Add-on Therapy A patient whose blood pressure is not adequately controlled with amlodipine (or another dihydropyridine calcium-channel blocker) alone or with valsartan (or another ARB) alone may be switched to combination therapy with amlodipine and valsartan tablets. A patient who experiences dose-limiting adverse reactions on either component alone may be switched to amlodipine and valsartan tablets containing a lower dose of that component in combination with the other to achieve similar blood pressure reductions.

The clinical response to amlodipine and valsartan tablets should be subsequently evaluated and if blood pressure remains uncontrolled after 3 to 4 weeks of therapy, the dose may be titrated up to a maximum of 10/320 mg.

2.3Replacement Therapy For convenience, patients receiving amlodipine and valsartan from separate tablets may instead wish to receive tablets of amlodipine and valsartan tablets containing the same component doses.

2.4Initial Therapy A patient may be initiated on amlodipine and valsartan tablets if it is unlikely that control of blood pressure would be achieved with a single agent. The usual starting dose is amlodipine and valsartan tablets 5/160 mg once daily in patients who are not volume-depleted.

💊 Dosage Forms and Strengths 48 words

3 DOSAGE FORMS AND STRENGTHS Amlodipine and valsartan tablets, USP are available as follows: 5/160 mg tablets, debossed with L298 (side 1) 10/160 mg tablets, debossed with L300 5/320 mg tablets, debossed with L299 10/320 mg tablets, debossed with L301 Tablets (amlodipine/valsartan mg): 5/160, 10/160, 5/320, 10/320 (3)

Contraindications 49 words

4 CONTRAINDICATIONS Do not use in patients with known hypersensitivity to any component. Do not coadminister aliskiren with amlodipine and valsartan tablets in patients with diabetes [see Drug Interactions (7)] Known hypersensitivity to any component; Do not coadminister aliskiren with amlodipine and valsartan tablets in patients with diabetes (4)

⚠️ Warnings and Cautions ~2 min read

5 WARNINGS AND PRECAUTIONS · Hypotension: Correct volume depletion prior to initiation (5.2) · Increased angina and/or myocardial infarction (5.3) · Monitor renal function and potassium in susceptible patients (5.4, 5.5)

5.1Fetal Toxicity Amlodipine and valsartan tablets can cause fetal harm when administered to a pregnant woman. Use of drugs that act on the renin-angiotensin system during the second and third trimesters of pregnancy reduces fetal renal function and increases fetal and neonatal morbidity and death. Resulting oligohydramnios can be associated with fetal lung hypoplasia and skeletal deformations.

Potential neonatal adverse effects include skull hypoplasia, anuria, hypotension, renal failure, and death. When pregnancy is detected, discontinue amlodipine and valsartan tablets as soon as possible [see Use in Specific Populations (8.1)] .

5.2Hypotension Excessive hypotension was seen in 0.4% of patients with uncomplicated hypertension treated with amlodipine and valsartan tablets in placebo-controlled studies. In patients with an activated renin-angiotensin system, such as volume-and/or salt-depleted patients receiving high doses of diuretics, symptomatic hypotension may occur in patients receiving angiotensin receptor blockers. Volume depletion should be corrected prior to administration of amlodipine and valsartan tablets.

Treatment with amlodipine and valsartan tablets should start under close medical supervision. Initiate therapy cautiously in patients with heart failure or recent myocardial infarction and in patients undergoing surgery or dialysis. Patients with heart failure or post-myocardial infarction patients given valsartan commonly have some reduction in blood pressure, but discontinuation of therapy because of continuing symptomatic hypotension usually is not necessary when dosing instructions are followed.

In controlled trials in heart failure patients, the incidence of hypotension in valsartan-treated patients was 5.5% compared to 1.8% in placebo-treated patients. In the Valsartan in Acute Myocardial Infarction Trial (VALIANT), hypotension in post-myocardial infarction patients led to permanent discontinuation of therapy in 1.4% of valsartan-treated patients and 0.8% of captopril-treated patients. Since the vasodilation induced by amlodipine is gradual in onset, acute hypotension has rarely been reported after oral administration.

Nonetheless, caution, as with any other peripheral vasodilator, should be exercised when administering amlodipine, particularly in patients with severe aortic stenosis. If excessive hypotension occurs with amlodipine and valsartan tablets, place the patient in a supine position and, if necessary, give intravenous normal saline. A transient hypotensive response is not a contraindication to further treatment, which usually can be continued without difficulty once the blood pressure has stabilized.

5.3Risk of Myocardial Infarction or Increased Angina Worsening angina and acute myocardial infarction can develop after starting or increasing the dose of amlodipine, particularly in patients with severe obstructive coronary artery disease.

5.4Impaired Hepatic Function Changes in renal function including acute renal failure can be caused by drugs that inhibit the renin-angiotensin system and by diuretics. Patients whose renal function may depend in part on the activity of the renin-angiotensin system (e.g. patients with renal artery stenosis, chronic kidney disease, severe congestive heart failure, or volume depletion) may be at particular risk of developing acute renal failure on amlodipine and valsartan tablets. Monitor renal function periodically in these patients.

Consider withholding or discontinuing therapy in patients who develop a clinically significant decrease in renal function on amlodipine and valsartan tablets [see Drug Interactions (7)] .

5.5Hyperkalemia Drugs that inhibit the renin-angiotensin system can cause hyperkalemia. Monitor serum electrolytes periodically.…

🤒 Adverse Reactions ~3 min read

6 ADVERSE REACTIONS In placebo-controlled clinical trials, discontinuation due to side effects occurred in 1.8% of patients in the amlodipine and valsartan tablets-treated patients and 2.1% in the placebo-treated group. The most common reasons for discontinuation of therapy with amlodipine and valsartan tablets were peripheral edema and vertigo. The adverse experiences that occurred in clinical trials (≥ 2% of patients) at a higher incidence than placebo included peripheral edema, nasopharyngitis, upper respiratory tract infection, and dizziness.

(6.1) To report SUSPECTED ADVERSE REACTIONS, contact Alembic Pharmaceuticals Limited at 1-866-210-9797 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

6.1Clinical Trials Experience Because clinical trials are conducted under widely varying conditions, adverse reaction rates observed in the clinical trials of a drug cannot be directly compared to rates in the clinical trials of another drug and may not reflect the rates observed in practice. The adverse reaction information from clinical trials does, however, provide a basis for identifying the adverse events that appear to be related to drug use and for approximating rates. Studies with Amlodipine and Valsartan Tablets: Amlodipine and valsartan tablets has been evaluated for safety in over 2600 patients with hypertension; over 1440 of these patients were treated for at least 6 months and over 540 of these patients were treated for at least 1 year.

Adverse reactions have generally been mild and transient in nature and have only infrequently required discontinuation of therapy. The hazards [see Warnings and Precautions(5)] of valsartan are generally independent of dose; those of amlodipine are a mixture of dose-dependent phenomena (primarily peripheral edema) and dose-independent phenomena, the former much more common than the latter. The overall frequency of adverse reactions was neither dose-related nor related to gender, age, or race.

In placebo-controlled clinical trials, discontinuation due to side effects occurred in 1.8% of patients in the amlodipine and valsartan tablets-treated patients and 2.1% in the placebo-treated group. The most common reasons for discontinuation of therapy with amlodipine and valsartan tablets were peripheral edema (0.4%), and vertigo (0.2%). The adverse reactions that occurred in placebo-controlled clinical trials in at least 2% of patients treated with amlodipine and valsartan tablets but at a higher incidence in amlodipine/valsartan patients (n=1437) than placebo (n=337) included peripheral edema (5.4% vs.

3%), nasopharyngitis (4.3% vs. 1.8%), upper respiratory tract infection (2.9% vs 2.1%) and dizziness (2.1% vs 0.9%). Orthostatic events (orthostatic hypotension and postural dizziness) were seen in less than 1% of patients.

Studies with Valsartan: Diovan ®** has been evaluated for safety in more than 4000 hypertensive patients in clinical trials. In trials in which valsartan was compared to an angiotensin-converting enzyme (ACE) inhibitor with or without placebo, the incidence of dry cough was significantly greater in the ACE inhibitor group (7.9%) than in the groups who received valsartan (2.6%) or placebo (1.5%). In a 129-patient trial limited to patients who had had dry cough when they had previously received ACE inhibitors, the incidences of cough in patients who received valsartan, HCTZ, or lisinopril were 20%, 19%, and 69% respectively (p<0.001).

Clinical Lab Test Findings: Creatinine: In heart failure patients, greater than 50% increases in creatinine were observed in 3.9% of valsartan-treated patients compared to 0.9% of placebo-treated patients. In post-myocardial infarction patients, doubling of serum creatinine was observed in 4.2% of valsartan-treated patients and 3.4% of captopril-treated patients. Blood Urea Nitrogen (BUN): In hypertensive patients, greater than 50% increases in BUN were observed in 5.5% of amlodipine and valsartan tablets-treated patients compared to 4.7% of placebo…

🔄 Drug Interactions ~2 min read

7 DRUG INTERACTIONS No drug interaction studies have been conducted with amlodipine and valsartan tablets and other drugs, although studies have been conducted with the individual amlodipine and valsartan components. Amlodipine Impact of Other Drugs on Amlodipine CYP3A Inhibitors Coadministration with CYP3A inhibitors (moderate and strong) results in increased systemic exposure to amlodipine and may require dose reduction. Monitor for symptoms of hypotension and edema when amlodipine is coadministered with CYP3A inhibitors to determine the need for dose adjustment [see Clinical Pharmacology (12.3)] .

CYP3A Inducers No information is available on the quantitative effects of CYP3A inducers on amlodipine. Blood pressure should be closely monitored when amlodipine is coadministered with CYP3A inducers (e.g. rifampicin, St. John's Wort).

Sildenafil Monitor for hypotension when sildenafil is coadministered with amlodipine [see Clinical Pharmacology (12.2)] . Impact of Amlodipine on Other Drugs Simvastatin Coadministration of simvastatin with amlodipine increases the systemic exposure of simvastatin. Limit the dose of simvastatin in patients on amlodipine to 20 mg daily [see Clinical Pharmacology (12.3)] .

Immunosuppressants Amlodipine may increase the systemic exposure of cyclosporine or tacrolimus when coadministered. Frequent monitoring of trough blood levels of cyclosporine and tacrolimus is recommended and adjust the dose when appropriate [see Clinical Pharmacology (12.3)] . Valsartan Agents Increasing Serum Potassium: Concomitant use of valsartan with other agents that block the renin-angiotensin system, potassium-sparing diuretics (e.g., spironolactone, triamterene, amiloride), potassium supplements, salt substitutes containing potassium or other drugs that may increase potassium levels (e.g., heparin) may lead to increases in serum potassium and in heart failure patients to increases in serum creatinine.

If co-medication is considered necessary, monitoring of serum potassium is advisable. Non-Steroidal Anti-Inflammatory Agents Including Selective Cyclooxygenase-2 Inhibitors (COX-2 Inhibitors): In patients who are elderly, volume-depleted (including those on diuretic therapy), or with compromised renal function, coadministration of NSAIDs, including selective COX-2 inhibitors, with angiotensin II receptor antagonists, including valsartan, may result in deterioration of renal function, including possible acute renal failure.

These effects are usually reversible. Monitor renal function periodically in patients receiving valsartan and NSAID therapy. The antihypertensive effect of angiotensin II receptor antagonists, including valsartan, may be attenuated by NSAIDs including selective COX-2 inhibitors.

Dual Blockade of the Renin-Angiotensin System (RAS): Dual blockade of the RAS with angiotensin receptor blockers, ACE inhibitors, or aliskiren is associated with increased risks of hypotension, hyperkalemia, and changes in renal function (including acute renal failure) compared to monotherapy. Most patients receiving the combination of two RAS inhibitors do not obtain any additional benefit compared to monotherapy. In general, avoid combined use of RAS inhibitors.Closely monitor blood pressure, renal function and electrolytes in patients on valsartan and other agents that affect the RAS.

Do not coadminister aliskiren with amlodipine and valsartan tablets in patients with diabetes. Avoid use of aliskiren with amlodipine and valsartan tablets in patients with renal impairment (GFR <60 mL/min). Lithium: Increases in serum lithium concentrations and lithium toxicity have been reported during concomitant administration of lithium with angiotensin II receptor antagonists.

Monitor serum lithium levels during concomitant use. If simvastatin is coadministered with amlodipine, do not exceed doses greater than 20 mg daily of simvastatin (7) Non-Steroidal Anti-Inflammatory Drug (NSAID) use may lead to increased risk of renal impairment and loss…

👥 Use in Specific Populations ~3 min read

8 USE IN SPECIFIC POPULATIONS Lactation: Breastfeeding is not recommended (8.2) Geriatric Patients: Not recommended for initial therapy (8.5) Hepatic Impairment: Not recommended for initial therapy (8.7)

8.1Pregnancy Risk Summary Amlodipine and valsartan tablets can cause fetal harm when administered to a pregnant woman. Use of drugs that act on the renin-angiotensin system during the second and third trimesters of pregnancy reduces fetal renal function and increases fetal and neonatal morbidity and death. Most epidemiologic studies examining fetal abnormalities after exposure to antihypertensive use in the first trimester have not distinguished drugs affecting the renin-angiotensin system from other antihypertensive agents.

Published reports include cases of anhydramnios and oligohydramnios in pregnant women treated with valsartan ( see Clinical Considerations ). When pregnancy is detected, discontinue amlodipine and valsartan tablets as soon as possible. The estimated background risk of major birth defects and miscarriage for the indicated population is unknown.

All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2 to 4% and 15 to 20%, respectively. Clinical Considerations Disease-Associated Maternal and/or Embryo/Fetal risk Hypertension in pregnancy increases the maternal risk for pre-eclampsia, gestational diabetes, premature delivery, and delivery complications (e.g., need for cesarean section, and post-partum hemorrhage).

Hypertension increases the fetal risk for intrauterine growth restriction and intrauterine death. Pregnant women with hypertension should be carefully monitored and managed accordingly. Fetal/Neonatal Adverse Reactions Oligohydramnios in pregnant women who use drugs affecting the renin-angiotensin system in the second and third trimesters of pregnancy can result in the following: reduced fetal renal function leading to anuria and renal failure, fetal lung hypoplasia, skeletal deformations, including skull hypoplasia, hypotension and death.

Perform serial ultrasound examinations to assess the intra-amniotic environment. Fetal testing may be appropriate, based on the week of gestation. Patients and physicians should be aware, however, that oligohydramnios may not appear until after the fetus has sustained irreversible injury.

If oligohydramnios is observed, consider alternative drug treatment. Closely observe neonates with histories of in utero exposure to amlodipine and valsartan tablets for hypotension, oliguria, and hyperkalemia. In neonates with a history of in utero exposure to amlodipine and valsartan tablets, if oliguria or hypotension occurs, support blood pressure and renal perfusion.

Exchange transfusions or dialysis may be required as a means of reversing hypotension and replacing renal function. Data Animal Data In rats, administered 20 mg/kg/day amlodipine plus 320 mg/kg/day valsartan, treatment-related maternal and fetal effects (developmental delays and alterations noted in the presence of significant maternal toxicity) were noted with the high dose combination. This corresponds to dose multiples of 9 and 19.5 times, respectively, the maximum recommended human dose (MRHD) of 10 mg/day for amlodipine and 320 mg/day for valsartan (based on body surface area and considering a 60 kg patient).

8.2Lactation Risk Summary There is limited information regarding the presence of amlodipine and valsartan in human milk, the effects on the breastfed infant, or the effects on milk production. Valsartan is present in rat milk. Limited published studies report that amlodipine is present in human milk.

Because of the potential for serious adverse reactions in breastfed infants, advise a nursing woman that breastfeeding is not recommended during treatment with amlodipine and valsartan tablets. Data Valsartan was detected in the milk…

🤰 Pregnancy ~2 min read

8.1Pregnancy Risk Summary Amlodipine and valsartan tablets can cause fetal harm when administered to a pregnant woman. Use of drugs that act on the renin-angiotensin system during the second and third trimesters of pregnancy reduces fetal renal function and increases fetal and neonatal morbidity and death. Most epidemiologic studies examining fetal abnormalities after exposure to antihypertensive use in the first trimester have not distinguished drugs affecting the renin-angiotensin system from other antihypertensive agents.

Published reports include cases of anhydramnios and oligohydramnios in pregnant women treated with valsartan ( see Clinical Considerations ). When pregnancy is detected, discontinue amlodipine and valsartan tablets as soon as possible. The estimated background risk of major birth defects and miscarriage for the indicated population is unknown.

All pregnancies have a background risk of birth defect, loss, or other adverse outcomes. In the U.S. general population, the estimated background risk of major birth defects and miscarriage in clinically recognized pregnancies is 2 to 4% and 15 to 20%, respectively. Clinical Considerations Disease-Associated Maternal and/or Embryo/Fetal risk Hypertension in pregnancy increases the maternal risk for pre-eclampsia, gestational diabetes, premature delivery, and delivery complications (e.g., need for cesarean section, and post-partum hemorrhage).

Hypertension increases the fetal risk for intrauterine growth restriction and intrauterine death. Pregnant women with hypertension should be carefully monitored and managed accordingly. Fetal/Neonatal Adverse Reactions Oligohydramnios in pregnant women who use drugs affecting the renin-angiotensin system in the second and third trimesters of pregnancy can result in the following: reduced fetal renal function leading to anuria and renal failure, fetal lung hypoplasia, skeletal deformations, including skull hypoplasia, hypotension and death.

Perform serial ultrasound examinations to assess the intra-amniotic environment. Fetal testing may be appropriate, based on the week of gestation. Patients and physicians should be aware, however, that oligohydramnios may not appear until after the fetus has sustained irreversible injury.

If oligohydramnios is observed, consider alternative drug treatment. Closely observe neonates with histories of in utero exposure to amlodipine and valsartan tablets for hypotension, oliguria, and hyperkalemia. In neonates with a history of in utero exposure to amlodipine and valsartan tablets, if oliguria or hypotension occurs, support blood pressure and renal perfusion.

Exchange transfusions or dialysis may be required as a means of reversing hypotension and replacing renal function. Data Animal Data In rats, administered 20 mg/kg/day amlodipine plus 320 mg/kg/day valsartan, treatment-related maternal and fetal effects (developmental delays and alterations noted in the presence of significant maternal toxicity) were noted with the high dose combination. This corresponds to dose multiples of 9 and 19.5 times, respectively, the maximum recommended human dose (MRHD) of 10 mg/day for amlodipine and 320 mg/day for valsartan (based on body surface area and considering a 60 kg patient).

🧒 Pediatric Use 18 words

8.4Pediatric Use Safety and effectiveness of amlodipine and valsartan tablets in pediatric patients have not been established.

🧓 Geriatric Use ~1 min read

8.5Geriatric Use In controlled clinical trials, 323 (22.5%) hypertensive patients treated with amlodipine and valsartan tablets were ≥ 65 years and 79 (5.5%) were ≥ 75 years. No overall differences in the efficacy or safety of amlodipine and valsartan tablets was observed in this patient population, but greater sensitivity of some older individuals cannot be ruled out. Amlodipine: The recommended starting dose of amlodipine 2.5 mg is not an available strength with amlodipine and valsartan tablets.

Clinical studies of amlodipine besylate tablets did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Other reported clinical experience has not identified differences in responses between the elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal or cardiac function, and of concomitant disease or other drug therapy.

Elderly patients have decreased clearance of amlodipine with a resulting increase of area under the curve (AUC) of approximately 40% to 60%. Valsartan: In the controlled clinical trials of valsartan, 1214 (36.2%) of hypertensive patients treated with valsartan were ≥ 65 years and 265 (7.9%) were ≥ 75 years. No overall difference in the efficacy or safety of valsartan was observed in this patient population, but greater sensitivity of some older individuals cannot be ruled out.

🆘 Overdosage ~1 min read

10 OVERDOSAGE Amlodipine Single oral doses of amlodipine maleate equivalent to 40 mg/kg and 100 mg/kg amlodipine in mice and rats, respectively, caused deaths. Single oral doses equivalent to 4 or more mg/kg amlodipine in dogs (11 or more times the maximum recommended human dose on a mg/m 2 basis) caused a marked peripheral vasodilation and hypotension. Overdosage might be expected to cause excessive peripheral vasodilation with marked hypotension.

In humans, experience with intentional overdosage of amlodipine is limited. Marked and potentially prolonged systemic hypotension up to and including shock with fatal outcome have been reported. If massive overdose should occur, initiate active cardiac and respiratory monitoring.

Frequent blood pressure measurements are essential. Should hypotension occur, cardiovascular support including elevation of the extremities and the judicious administration of fluids should be initiated. If hypotension remains unresponsive to these conservative measures, consider administration of vasopressors (such as phenylephrine) with attention to circulating volume and urine output.

As amlodipine is highly protein bound, hemodialysis is not likely to be of benefit. Administration of activated charcoal to healthy volunteers immediately or up to two hours after ingestion of amlodipine has been shown to significantly decrease amlodipine absorption. Valsartan Limited data are available related to overdosage in humans.

The most likely effect of overdose with valsartan would be peripheral vasodilation, hypotension, and tachycardia; bradycardia could occur from parasympathetic (vagal) stimulation. Depressed levels of consciousness, circulatory collapse, and shock have been reported. If symptomatic hypotension should occur, institute supportive treatment.

Valsartan is not removed from the plasma by hemodialysis. Valsartan was without grossly observable adverse effects at single oral doses up to 2000 mg/kg in rats and up to 1000 mg/kg in marmosets, except for the salivation and diarrhea in the rat and vomiting in the marmoset at the highest dose (60 and 37 times, respectively, the MRHD on a mg/m 2 basis) (Calculations assume an oral dose of 320 mg/day and a 60 kg patient).

🧬 Clinical Pharmacology ~3 min read

12 CLINICAL PHARMACOLOGY

12.1Mechanism of Action Amlodipine Amlodipine is a dihydropyridine calcium channel blocker that inhibits the transmembrane influx of calcium ions into vascular smooth muscle and cardiac muscle. Experimental data suggest that amlodipine binds to both dihydropyridine and nondihydropyridine binding sites. The contractile processes of cardiac muscle and vascular smooth muscle are dependent upon the movement of extracellular calcium ions into these cells through specific ion channels.

Amlodipine inhibits calcium ion influx across cell membranes selectively, with a greater effect on vascular smooth muscle cells than on cardiac muscle cells. Negative inotropic effects can be detected in vitro but such effects have not been seen in intact animals at therapeutic doses. Serum calcium concentration is not affected by amlodipine.

Within the physiologic pH range, amlodipine is an ionized compound (pKa=8.6), and its kinetic interaction with the calcium channel receptor is characterized by a gradual rate of association and dissociation with the receptor binding site, resulting in a gradual onset of effect. Amlodipine is a peripheral arterial vasodilator that acts directly on vascular smooth muscle to cause a reduction in peripheral vascular resistance and reduction in blood pressure. Valsartan Angiotensin II is formed from angiotensin I in a reaction catalyzed by angiotensin-converting enzyme (ACE, kininase II).

Angiotensin II is the principal pressor agent of the renin-angiotensin system, with effects that include vasoconstriction, stimulation of synthesis and release of aldosterone, cardiac stimulation, and renal reabsorption of sodium. Valsartan blocks the vasoconstrictor and aldosterone-secreting effects of angiotensin II by selectively blocking the binding of angiotensin II to the AT 1 receptor in many tissues, such as vascular smooth muscle and the adrenal gland. Its action is therefore independent of the pathways for angiotensin II synthesis.

There is also an AT 2 receptor found in many tissues, but AT 2 is not known to be associated with cardiovascular homeostasis. Valsartan has much greater affinity (about 20,000-fold) for the AT 1 receptor than for the AT 2 receptor. The increased plasma levels of angiotensin following AT 1 receptor blockade with valsartan may stimulate the unblocked AT 2 receptor.

The primary metabolite of valsartan is essentially inactive with an affinity for the AT 1 receptor about one-200 th that of valsartan itself. Blockade of the renin-angiotensin system with ACE inhibitors, which inhibit the biosynthesis of angiotensin II from angiotensin I, is widely used in the treatment of hypertension. ACE inhibitors also inhibit the degradation of bradykinin, a reaction also catalyzed by ACE.

Because valsartan does not inhibit ACE (kininase II), it does not affect the response to bradykinin. Whether this difference has clinical relevance is not yet known. Valsartan does not bind to or block other hormone receptors or ion channels known to be important in cardiovascular regulation.

Blockade of the angiotensin II receptor inhibits the negative regulatory feedback of angiotensin II on renin secretion, but the resulting increased plasma renin activity and angiotensin II circulating levels do not overcome the effect of valsartan on blood pressure.

12.2Pharmacodynamics Amlodipine Following administration of therapeutic doses to patients with hypertension, amlodipine produces vasodilation resulting in a reduction of supine and standing blood pressures. These decreases in blood pressure are not accompanied by a significant change in heart rate or plasma catecholamine levels with chronic dosing. Although the acute intravenous administration of amlodipine decreases arterial blood pressure and increases heart rate in hemodynamic studies of patients with chronic stable angina, chronic oral administration of amlodipine in clinical trials did not lead to clinically significant changes in heart rate or bloo…

🧬 Mechanism of Action ~2 min read

12.1Mechanism of Action Amlodipine Amlodipine is a dihydropyridine calcium channel blocker that inhibits the transmembrane influx of calcium ions into vascular smooth muscle and cardiac muscle. Experimental data suggest that amlodipine binds to both dihydropyridine and nondihydropyridine binding sites. The contractile processes of cardiac muscle and vascular smooth muscle are dependent upon the movement of extracellular calcium ions into these cells through specific ion channels.

Amlodipine inhibits calcium ion influx across cell membranes selectively, with a greater effect on vascular smooth muscle cells than on cardiac muscle cells. Negative inotropic effects can be detected in vitro but such effects have not been seen in intact animals at therapeutic doses. Serum calcium concentration is not affected by amlodipine.

Within the physiologic pH range, amlodipine is an ionized compound (pKa=8.6), and its kinetic interaction with the calcium channel receptor is characterized by a gradual rate of association and dissociation with the receptor binding site, resulting in a gradual onset of effect. Amlodipine is a peripheral arterial vasodilator that acts directly on vascular smooth muscle to cause a reduction in peripheral vascular resistance and reduction in blood pressure. Valsartan Angiotensin II is formed from angiotensin I in a reaction catalyzed by angiotensin-converting enzyme (ACE, kininase II).

Angiotensin II is the principal pressor agent of the renin-angiotensin system, with effects that include vasoconstriction, stimulation of synthesis and release of aldosterone, cardiac stimulation, and renal reabsorption of sodium. Valsartan blocks the vasoconstrictor and aldosterone-secreting effects of angiotensin II by selectively blocking the binding of angiotensin II to the AT 1 receptor in many tissues, such as vascular smooth muscle and the adrenal gland. Its action is therefore independent of the pathways for angiotensin II synthesis.

There is also an AT 2 receptor found in many tissues, but AT 2 is not known to be associated with cardiovascular homeostasis. Valsartan has much greater affinity (about 20,000-fold) for the AT 1 receptor than for the AT 2 receptor. The increased plasma levels of angiotensin following AT 1 receptor blockade with valsartan may stimulate the unblocked AT 2 receptor.

The primary metabolite of valsartan is essentially inactive with an affinity for the AT 1 receptor about one-200 th that of valsartan itself. Blockade of the renin-angiotensin system with ACE inhibitors, which inhibit the biosynthesis of angiotensin II from angiotensin I, is widely used in the treatment of hypertension. ACE inhibitors also inhibit the degradation of bradykinin, a reaction also catalyzed by ACE.

Because valsartan does not inhibit ACE (kininase II), it does not affect the response to bradykinin. Whether this difference has clinical relevance is not yet known. Valsartan does not bind to or block other hormone receptors or ion channels known to be important in cardiovascular regulation.

Blockade of the angiotensin II receptor inhibits the negative regulatory feedback of angiotensin II on renin secretion, but the resulting increased plasma renin activity and angiotensin II circulating levels do not overcome the effect of valsartan on blood pressure.

📦 How Supplied / Storage and Handling ~1 min read

16 HOW SUPPLIED/STORAGE AND HANDLING Amlodipine and valsartan tablets, USP are available as non-scored tablets containing amlodipine besylate, USP (6.9 mg or 13.9 mg, equivalent to 5 mg, or 10 mg of amlodipine respectively) with valsartan, USP 160 mg or 320 mg, providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg and 10/320 mg. All strengths are packaged in bottles of 30, 90, 100 and 500 counts, and unit dose packages. 5/160 mg Tablets - dark yellow, oval-shaped, biconvex, film coated tablets debossed with ‘L298’ on one side and plain on other side.

Bottles of 30 NDC # 62332-205-30 Bottles of 100 NDC # 62332-205-31 Bottles of 500 NDC # 62332-205-71 100 (10 x 10) Tablets Unit Dose Blister Pack NDC # 62332-205-10 10/160 mg Tablets - light yellow, oval-shaped, biconvex, film coated tablets debossed with ‘L300’ on one side and plain on other side. Bottles of 30 NDC # 62332-206-30 Bottles of 100 NDC # 62332-206-31 Bottles of 500 NDC # 62332-206-71 100 (10 x 10) Tablets Unit Dose Blister Pack NDC # 62332-206-10 5/320 mg Tablets - dark yellow, oval-shaped, biconvex, film coated tablets debossed with ‘L299’ on one side and plain on other side.

Bottles of 30 NDC # 62332-207-30 Bottles of 100 NDC # 62332-207-31 Bottles of 500 NDC # 62332-207-71 100 (10 x 10) Tablets Unit Dose Blister Pack NDC # 62332-207-10 10/320 mg Tablets - light yellow, oval-shaped, biconvex, film coated tablets debossed with ‘L301’ on one side and plain on other side. Bottles of 30 NDC # 62332-208-30 Bottles of 100 NDC # 62332-208-31 Bottles of 500 NDC # 62332-208-71 100 (10 x 10) Tablets Unit Dose Blister Pack NDC # 62332-208-10 Store at 25°C (77°F); excursions permitted to 15-30°C (59-86°F). [See USP Controlled Room Temperature.] Protect from moisture.

📋 Description ~1 min read

11 DESCRIPTION Amlodipine and valsartan tablets, USP are fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate, USP is a white or almost white powder, slightly soluble in water and sparingly soluble in ethanol.

Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is Its empirical formula is C 20 H 25 ClN 2 O 5 •C 6 H 6 O 3 S and its molecular weight is 567.1. Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan, USP is white or almost white hygroscopic powder, freely soluble in anhydrous ethanol; sparingly soluble in methylene chloride; practically insoluble in water.

Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is Its empirical formula is C 24 H 29 N 5 O 3 and its molecular weight is 435.5. Amlodipine and valsartan tablets, USP are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, USP (6.9 mg or 13.9 mg, equivalent to 5 mg or 10 mg of amlodipine respectively), with 160 mg, or 320 mg of valsartan, USP providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg.

The inactive ingredients for all strengths of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate and microcrystalline cellulose. Additionally the 5/160 mg and 5/320 mg strengths contain iron oxide red. The film coating contains hypromellose, iron oxide yellow, polyethylene glycol, talc and titanium dioxide. amlovalsartanl-str1.jpg amlovalsartanl-str2.jpg

💬 Information for Patients 214 words

17 PATIENT COUNSELING INFORMATION Information for Patients Advise the patient to read the FDA-approved patient labeling (Patient Information). Pregnancy: Advise female patients of childbearing age about the consequences of exposure to amlodipine and valsartan tablets during pregnancy. Discuss treatment options with women planning to become pregnant.

Ask patients to report pregnancies to their physicians as soon as possible [see Warnings and Precautions (5.1), Use in Specific Populations (8.1)]. Lactation: Advise women not to breastfeed during treatment with amlodipine and valsartan tablets [see Use in Specific Populations (8.2)]. Symptomatic Hypotension: Advise patients that lightheadedness can occur, especially during the first days of therapy, and that it should be reported to their healthcare provider.

Tell patients that if syncope occurs to discontinue amlodipine and valsartan tablets until the physician has been consulted. Caution all patients that inadequate fluid intake, excessive perspiration, diarrhea, or vomiting can lead to an excessive fall in blood pressure, with the same consequences of lightheadedness and possible syncope [see Warnings and Precautions (5.2)] . Hyperkalemia: Advise patients not to use salt substitutes without consulting their healthcare provider [see Drug Interactions (7)] .

Medication Guide available at http://www.alembicusa.com/medicationguide.aspx or call 1-866-210-9797. Manufactured by: Alembic Pharmaceuticals Limited (Formulation Division), Panelav 389350, Gujarat, India Manufactured for: Alembic Pharmaceuticals, Inc. Bedminster, NJ 07921, USA Revised: 06/2024

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.