Home › NDC Lookup › Ingredients › Ropivacaine Hydrochloride › 17478-0082-90
Ropivacaine Hydrochloride 2 mg/mL Injection, Solution — NDC 17478-0082-90 package photo

Ropivacaine Hydrochloride 2 mg/mL Injection, Solution

by Akorn · 6 BOTTLE in 1 CARTON (17478-082-90) / 100 mL in 1 BOTTLE
NDC 17478-0082-90
🏷️ FDA NDC (as labeled) 17478-082-90 billing pads the product segment with a zero
This package
Contains100 mL in 1 bottle Pack sizes2 compare ↓
Also comes in: 6 bottles 17478-0082-92
Rx only Generic Discontinued Non-controlled ⚠ Inactivated by FDA
🗂️ Data synced Jul 14, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

This page is curated, coded, and maintained by

Compiled from public FDA, CMS, DailyMed, NADAC, and related drug data sources. Editorial policy

⚠️
Other active recalls for Ropivacaine Hydrochloride (different manufacturers) — 2 · tap to view
These affect other manufacturers’ products for the same ingredient — not necessarily the exact NDC on this page.
Class II · Jul 16, 2026 — Presence of Particulate Matter: Hair was found in products (Fresenius Kabi USA, LLC) · FDA recall D-0727-2026
Class I · Apr 17, 2025 — Presence of Particulate Matter (Amneal Pharmaceuticals, LLC) · FDA recall D-0402-2025
Each entry is an official FDA enforcement report — look up any recall number in the FDA recall database ↗
⚠️
Excluded from the active FDA NDC Directory. FDA inactivated this product’s listing record, so it is excluded from the active NDC Directory. The listing was last certified through Dec 2023. A label may still appear on DailyMed, but the NDC is no longer in the current FDA NDC Directory. Search the FDA NDC Directory ↗

🆔 Identity & classification

FDA NDC (as labeled) 17478-082-90
Product NDC 17478-082
11-digit billing NDC 17478008290
NCPDP billing unit ML — per mL (volume)
Application # ANDA204636
SPL Set ID 3f538ea5-1e08-4fb5-9756-696ac3d817a3
Physiologic effect Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia
DEA schedule Non-controlled
Marketing category ANDA
Marketing status Discontinued
FDA listing status Inactivated by FDA (certified through Dec 2023)
Route EPIDURAL; INFILTRATION; PERINEURAL
Dosage form INJECTION, SOLUTION
Substance ROPIVACAINE HYDROCHLORIDE
GCN Seq No 028219
GCN 46083
HICL code 036674
Ingredient (HICL) Ropivacaine Hcl/Pf
HIC1 code H
Therapeutic class — broad (HIC1) Nervous System (Except Autonomic)
HIC2 code H0
Therapeutic class — intermediate (HIC2) Act On Non-Autonomic Nervous System
HIC3 code H0A
Therapeutic class — specific (HIC3) Local Anesthetics
AHFS code 72:00.00.00
AHFS class Local Anesthetics
FDB label name ROPIVACAINE 0.2% 200 MG/100 ML
FDB brand name Ropivacaine Hcl
Legend status F — Federal legend — prescription drug or device
TE code (Orange Book) AP · RLD · RS
Why two NDCs? The FDA registers this code as 17478-082-90 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 17478-0082-90. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏭 Manufacturer & labeler

LabelerAkorn
Application holderRISING PHARMA HOLDINGS INC
FDA applicationANDA204636 (ANDA)
Labeler code17478
Product typeHuman Prescription Drug
Portfolio3 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Label name ROPIVACAINE 0.2% 200 MG/100 ML Ingredient Ropivacaine Hcl/Pf
📗 Our plain-language guide HelloPharmacist
  • Ropivacaine is a local anesthetic — it temporarily blocks pain signals in a specific part of your body. You might be receiving it to keep you comfortable and pain-free during surge...
  • What is ropivacaine actually used for? Why am I getting it?
  • It depends on the dose and concentration used. Ropivacaine blocks pain first, then temperature, then touch, and at higher concentrations it can reduce muscle movement too. For labo...
  • Will I be completely numb — can I move at all?
📖 Read our full Ropivacaine guide →

Supplement & herbal interactions

🌿 Drug–supplement interaction checker →
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • UNII QTT17582CB
    A strong acid used to adjust and maintain the proper pH level in liquid medicines, ensuring stability and preventing breakdown of active ingredients.
  • UNII 451W47IQ8X
    Sodium chloride is common table salt. It's used in medicines as a buffer to maintain proper pH, as a filler to add bulk, or to adjust the osmotic balance in liquid formulations.
  • UNII 55X04QC32I
    A strong alkaline chemical used to adjust and maintain the pH balance of liquid medicines. It helps keep the medicine stable and ensures it stays effective during storage.
  • UNII 059QF0KO0R
    Water is a liquid solvent that dissolves and mixes ingredients together in liquid medicines, syrups, and injections. It helps distribute the active drug evenly throughout the product.

4 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMed — ingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer mLPer package
Retail pharmacies payNADAC · weekly Not in the retail survey — common for institutional, discontinued, or low-volume packs.
Medicaid paysCMS SDUD · 12 mo No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · quarterly No Part D plan price is available for this NDC in our data.
ℹ️
No price is published for this exact package yet. CMS surveys NADAC per package size, so a different pack of the same drug often has one.
Try another pack size: 6 bottles
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Ropivacaine Hydrochloride 2 mg/mLthis 17478-0082-90 Akorn 6 bottles — AP Discontinued —
About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

⏳ Availability & generic status

📍
2026
Currently FDA-listed
listed with the FDA
🔓
·
Generic on the market
this product is a generic
✅This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

🔬 Reported adverse events (FAERS)

Read carefully: FAERS reports are voluntary and unverified. Counts are not incidence, do not establish causation, are subject to reporting bias, and cannot be used to compare one drug to another. Shown for signal context only. Reports for Ropivacaine Hydrochloride — the ingredient across all brands.

Top reported reactions

Vomiting575
Dyspnoea574
Drug Hypersensitivity562
Pneumonia558
Oedema553
Asthma535
Wheezing526

Reporter sex

2,339 reports
Male · 26%
Female · 73%
Unknown · 0%

Serious outcomes

Hospitalization631
Life-threatening336
Disabling130
Death118
Reports over time (by year) — tap or hover for the count & year
2020 2022 2024 2026 342 0
Most recent year is provisional (FAERS lags ~3 months).
Where does this data come from?
Adverse-event reports from the FDA Adverse Event Reporting System (FAERS) via openFDA. FAERS reports are voluntary and unverified — counts are not incidence and don’t establish causation.

📦 Packaging — all sizes for this product

Package NDCDescription Marketing startStatus
17478-0082-90 You're viewing this 6 BOTTLE in 1 CARTON (17478-082-90) / 100 mL in 1 BOTTLE 2018-03-16 Inactivated by FDA
17478-0082-92 6 BOTTLE in 1 CARTON (17478-082-92) / 200 mL in 1 BOTTLE 2018-03-16 Inactivated by FDA

Pack size FAQ

What quantity is in NDC 17478-0082-90?
NDC 17478-0082-90 is listed by the FDA — 6 bottle in 1 carton / 100 ml in 1 bottle.
What NDC number is used to bill for this package of Ropivacaine Hydrochloride 2 mg/mL Injection, Solution?
Bill NDC 17478-0082-90 — the 11-digit billing format is 17478008290. Pharmacy and medical claims use the 11-digit form; the FDA label may print a shorter form of the same code.

🧭 About this NDC listing & data coverage

Finished prescription product No longer marketed (per FDA listing data)
What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos ✓ Available
Inactive ingredients (structured) ✓ Available
NADAC pharmacy acquisition price (CMS) — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey.
Orange Book / therapeutic-equivalence data ✓ Available
HCPCS J-code billing crosswalk — Not published for this NDC Most self-administered / retail products have no J-code — that is normal.
Medicaid utilization (CMS SDUD) — Not published for this NDC CMS reports utilization only for NDCs with Medicaid claims above its privacy threshold.
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Why is there no price listed?
The pricing shown on our NDC pages comes from CMS NADAC, a voluntary survey of retail community pharmacy invoices. CMS does not publish a NADAC for every NDC — packages outside the retail survey (institutional and hospital products, bulk packages, discontinued items, and many OTC items) may never receive one. A missing price reflects the survey's scope, not this product's actual cost, and does not mean the product is free or unavailable.
What does the discontinued status mean for this NDC?
The labeler reported a marketing end date (or the listing was delisted), so this specific package is no longer actively marketed. Remaining stock may still be dispensed for a time, and the NDC stays valid for historical records and claims — but data feeds (pricing, labeling) typically stop updating for it. Other package sizes or other manufacturers' versions of the same medication may still be marketed — see the equivalents section where available.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The FDA registers it as 17478-082-90, which is what is printed on the packaging and shown on DailyMed. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero: 17478-0082-90, written without dashes as 17478008290. The Identity section at the top of this page lists every form of this code.
What do the three segments of this NDC mean?
In 17478-0082-90, the first segment (17478) is the labeler code FDA assigned to Akorn; the middle segment (0082) identifies this specific product — its ingredient, strength, and dosage form; and the last segment (90) identifies this exact package size and type. Together they name one specific package of one specific product.
Does this product come in other package sizes?
Yes — the FDA directory lists 1 other package presentation of this same product, including 6 bottles (17478-0082-92). Each has its own NDC and its own page — see the package list near the top of this page.
Who lists this product with the FDA?
Akorn is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🎯 Indications and Usage ⏱️ Dosage and Administration ⛔ Contraindications ⚠️ Warnings 🤒 Adverse Reactions 🔄 Drug Interactions 🤰 Pregnancy 🧒 Pediatric Use 🧓 Geriatric Use 🆘 Overdosage 🧬 Clinical Pharmacology 🧬 Mechanism of Action 📦 How Supplied / Storage and Handling 📋 Description 💬 Information for Patients
🎯 Indications and Usage 51 words ▾

INDICATIONS AND USAGE Ropivacaine Hydrochloride is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration Acute Pain Management: epidural continuous infusion or intermittent bolus, eg, postoperative or labor; local infiltration

⏱️ Dosage and Administration ~3 min read ▾

DOSAGE AND ADMINISTRATION The rapid injection of a large volume of local anesthetic solution should be avoided and fractional (incremental) doses should always be used. The smallest dose and concentration required to produce the desired result should be administered. There have been adverse event reports of chondrolysis in patients receiving intra-articular infusions of local anesthetics following arthroscopic and other surgical procedures.

Ropivacaine Hydrochloride is not approved for this use (see WARNINGS and DOSAGE AND ADMINISTRATION ). The dose of any local anesthetic administered varies with the anesthetic procedure, the area to be anesthetized, the vascularity of the tissues, the number of neuronal segments to be blocked, the depth of anesthesia and degree of muscle relaxation required, the duration of anesthesia desired, individual tolerance, and the physical condition of the patient. Patients in poor general condition due to aging or other compromising factors such as partial or complete heart conduction block, advanced liver disease or severe renal dysfunction require special attention although regional anesthesia is frequently indicated in these patients.

To reduce the risk of potentially serious adverse reactions, attempts should be made to optimize the patient's condition before major blocks are performed, and the dosage should be adjusted accordingly. Use an adequate test dose (3 to 5 mL of a short acting local anesthetic solution containing epinephrine) prior to induction of complete block. This test dose should be repeated if the patient is moved in such a fashion as to have displaced the epidural catheter.

Allow adequate time for onset of anesthesia following administration of each test dose. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Solutions which are discolored or which contain particulate matter should not be administered.

Table 7 Dosage Recommendations * = Not Applicable † = The dose for a major nerve block must be adjusted according to site of administration and patient status. Supraclavicular brachial plexus blocks may be associated with a higher frequency of serious adverse reactions, regardless of the local anesthetic used (see PRECAUTIONS ). ‡ = Median dose of 21 mg per hour was administered by continuous infusion or by incremental injections (top-ups) over a median delivery time of 5.5 hours. § = Cumulative doses up to 770 mg of Ropivacaine Hydrochloride over 24 hours (intraoperative block plus postoperative infusion); Continuous epidural infusion at rates up to 28 mg per hour for 72 hours have been well tolerated in adults, ie, 2016 mg plus surgical dose of approximately 100 to 150 mg as top-up.

Conc. Volume Dose Onset Duration mg/mL (%) mL mg min hours SURGICAL ANESTHESIA Lumbar Epidural 5 (0.5%) 15 to 30 75 to 150 15 to 30 2 to 4 Administration 7.5 (0.75%) 15 to 25 113 to 188 10 to 20 3 to 5 Surgery 10 (1%) 15 to 20 150 to 200 10 to 20 4 to 6 Lumbar Epidural 5 (0.5%) 20 to 30 100 to 150 15 to 25 2 to 4 Administration 7.5 (0.75%) 15 to 20 113 to 150 10 to 20 3 to 5 Cesarean Section Thoracic Epidural 5 (0.5%) 5 to 15 25 to 75 10 to 20 n/a* Administration 7.5 (0.75%) 5 to 15 38 to 113 10 to 20 n/a* Surgery Major Nerve Block † 5 (0.5%) 35 to 50 175 to 250 15 to 30 5 to 8 (e.g., brachial plexus block) 7.5 (0.75%) 10 to 40 75 to 300 10 to 25 6 to 10 Field Block 5 (0.5%) 1 to 40 5 to 200 1 to 15 2 to 6 (e.g., minor nerve blocks and infiltration) LABOR PAIN MANAGEMENT Lumbar Epidural Administration Initial Dose 2 (0.2%) 10 to 20 20 to 40 10 to15 0.5 to

1.5Continuous infusion ‡ 2 (0.2%) 6 to 14 12 to 28 n/a* n/a* mL/h mg/h Incremental injections (top-up) ‡ 2 (0.2%) 10 to 15 20 to 30 n/a* n/a* mL/h mg/h POSTOPERATIVE PAIN MANAGEMENT Lumbar Epidural Administration Continuous infusion § 2 (0.2%) 6 to 14 12 to 28 n/a* n/a* mL/h mg/h Thoracic Epidural Administration Continuous infusion § 2 (0.…

⛔ Contraindications 23 words ▾

CONTRAINDICATIONS Ropivacaine Hydrochloride is contraindicated in patients with a known hypersensitivity to ropivacaine or to any local anesthetic agent of the amide type.

⚠️ Warnings ~3 min read ▾

WARNINGS In performing Ropivacaine Hydrochloride blocks, unintended intravenous injection is possible and may result in cardiac arrhythmia or cardiac arrest. The potential for successful resuscitation has not been studied in humans. There have been rare reports of cardiac arrest during the use of Ropivacaine Hydrochloride for epidural anesthesia or peripheral nerve blockade, the majority of which occurred after unintentional accidental intravascular administration in elderly patients and in patients with concomitant heart disease.

In some instances, resuscitation has been difficult. Should cardiac arrest occur, prolonged resuscitative efforts may be required to improve the probability of a successful outcome. Ropivacaine Hydrochloride should be administered in incremental doses.

It is not recommended for emergency situations, where a fast onset of surgical anesthesia is necessary. Historically, pregnant patients were reported to have a high risk for cardiac arrhythmias, cardiac/circulatory arrest and death when 0.75% bupivacaine (another member of the amino amide class of local anesthetics) was inadvertently rapidly injected intravenously. Prior to receiving major blocks the general condition of the patient should be optimized and the patient should have an IV line inserted.

All necessary precautions should be taken to avoid intravascular injection. Local anesthetics should only be administered by clinicians who are well versed in the diagnosis and management of dose-related toxicity and other acute emergencies that may arise from the block to be employed, and then only after ensuring the immediate (without delay) availability of oxygen, other resuscitative drugs, cardiopulmonary resuscitative equipment, and the personnel resources needed for proper management of toxic reactions and related emergencies (see also ADVERSE REACTIONS , PRECAUTIONS and MANAGEMENT OF LOCAL ANESTHETIC EMERGENCIES ).

Delay in proper management of dose-related toxicity, underventilation from any cause, and/or altered sensitivity may lead to the development of acidosis, cardiac arrest and, possibly, death. Solutions of Ropivacaine Hydrochloride should not be used for the production of obstetrical paracervical block anesthesia, retrobulbar block, or spinal anesthesia (subarachnoid block) due to insufficient data to support such use. Intravenous regional anesthesia (bier block) should not be performed due to a lack of clinical experience and the risk of attaining toxic blood levels of ropivacaine.

Intra-articular infusions of local anesthetics following arthroscopic and other surgical procedures is an unapproved use, and there have been post-marketing reports of chondrolysis in patients receiving such infusions. The majority of reported cases of chondrolysis have involved the shoulder joint; cases of gleno-humeral chondrolysis have been described in pediatric and adult patients following intra-articular infusions of local anesthetics with and without epinephrine for periods of 48 to 72 hours. There is insufficient information to determine whether shorter infusion periods are not associated with these findings.

The time of onset of symptoms, such as joint pain, stiffness and loss of motion can be variable, but may begin as early as the 2 nd month after surgery. Currently, there is no effective treatment for chondrolysis; patients who experienced chondrolysis have required additional diagnostic and therapeutic procedures and some required arthroplasty or shoulder replacement. It is essential that aspiration for blood, or cerebrospinal fluid (where applicable), be done prior to injecting any local anesthetic, both the original dose and all subsequent doses, to avoid intravascular or subarachnoid injection.

However, a negative aspiration does not ensure against an intravascular or subarachnoid injection. A well-known risk of epidural anesthesia may be an unintentional subarachnoid injection of local anesthetic. Two clinical studies have been performed to veri…

🤒 Adverse Reactions ~3 min read ▾

ADVERSE REACTIONS: Reactions to ropivacaine are characteristic of those associated with other amide-type local anesthetics. A major cause of adverse reactions to this group of drugs may be associated with excessive plasma levels, which may be due to overdosage, unintentional intravascular injection or slow metabolic degradation. The reported adverse events are derived from clinical studies conducted in the U.S. and other countries.

The reference drug was usually bupivacaine. The studies used a variety of premedications, sedatives, and surgical procedures of varying length. A total of 3,988 patients have been exposed to Ropivacaine Hydrochloride at concentrations up to 1% in clinical trials.

Each patient was counted once for each type of adverse event. Incidence ≥ 5% For the indications of epidural administration in surgery, cesarean section, postoperative pain management, peripheral nerve block, and local infiltration, the following treatment-emergent adverse events were reported with an incidence of ≥5% in all clinical studies (N=3988): hypotension (37%), nausea (24.8%), vomiting (11.6%), bradycardia (9.3%), fever (9.2%), pain (8%), postoperative complications (7.1%), anemia (6.1%), paresthesia (5.6%), headache (5.1%), pruritus (5.1%), and back pain (5%).

Incidence 1 to 5% Urinary retention, dizziness, rigors, hypertension, tachycardia, anxiety, oliguria, hypoesthesia, chest pain, hypokalemia, dyspnea, cramps, and urinary tract infection. Incidence in Controlled Clinical Trials The reported adverse events are derived from controlled clinical studies with Ropivacaine Hydrochloride (concentrations ranged from 0.125% to 1% for Ropivacaine Hydrochloride and 0.25% to 0.75% for bupivacaine) in the U.S. and other countries involving 3,094 patients. Table 3A and 3B list adverse events (number and percentage) that occurred in at least 1% of Ropivacaine Hydrochloride-treated patients in these studies.

The majority of patients receiving concentrations higher than 5 mg/mL (0.5%) were treated with Ropivacaine Hydrochloride. Table 3A Adverse Events Reported in ≥1% of Adult Patients Receiving Regional or Local Anesthesia (Surgery, Labor, Cesarean Section, Postoperative Pain Management, Peripheral Nerve Block and Local Infiltration) Adverse Reaction Ropivacaine Hydrochloride total N=1661 Bupivacaine total N=1433 N (%) N (%) Hypotension 536 (32.3) 408 (28.5) Nausea 283 (17) 207 (14.4) Vomiting 117 (7) 88 (6.1) Bradycardia 96 (5.8) 73 (5.1) Headache 84 (5.1) 68 (4.7) Paresthesia 82 (4.9) 57 (4) Back pain 73 (4.4) 75 (5.2) Pain 71 (4.3) 71 (5) Pruritus 63 (3.8) 40 (2.8) Fever 61 (3.7) 37 (2.6) Dizziness 42 (2.5) 23 (1.6) Rigors (Chills) 42 (2.5) 24 (1.7) Postoperative complications 41 (2.5) 44 (3.1) Hypoesthesia 27 (1.6) 24 (1.7) Urinary retention 23 (1.4) 20 (1.4) Progression of labor poor/failed 23 (1.4) 22 (1.5) Anxiety 21 (1.3) 11 (0.8) Breast disorder, breast-feeding 21 (1.3) 12 (0.8) Rhinitis 18 (1.1) 13 (0.9) Table 3B Adverse Events Reported in ≥1% of Fetuses or Neonates of Mothers Who Received Regional Anesthesia (Cesarean Section and Labor Studies) Adverse Reaction Ropivacaine Hydrochloride total N=639 Bupivacaine total N=573 N (%) N (%) Fetal bradycardia 77 (12.1) 68 (11.9) Neonatal jaundice 49 (7.7) 47 (8.2) Neonatal complication-NOS 42 (6.6) 38 (6.6) Apgar score low 18 (2.8) 14 (2.4) Neonatal respiratory disorder 17 (2.7) 18 (3.1) Neonatal tachypnea 14 (2.2) 15 (2.6) Neonatal fever 13 (2) 14 (2.4) Fetal tachycardia 13 (2) 12 (2.1) Fetal distress 11 (1.7) 10 (1.7) Neonatal infection 10 (1.6) 8 (1.4) Neonatal hypoglycemia 8 (1.3) 16 (2.8) Incidence < 1% The following adverse events were reported during the Ropivacaine Hydrochloride clinical program in more than one patient (N=3988), occurred at an overall incidence of <1%, and were considered relevant: Application Site Reactions - injection site pain Cardiovascular System - vasovagal reaction, syncope, postural hypotension, non-specific ECG abnormalities Female Reproductive - poor pro…

🔄 Drug Interactions ~1 min read ▾

Drug Interactions Specific trials studying the interaction between ropivacaine and class III antiarrhythmic drugs (eg, amiodarone) have not been performed, but caution is advised (see WARNINGS ). Ropivacaine hydrochloride should be used with caution in patients receiving other local anesthetics or agents structurally related to amide-type local anesthetics, since the toxic effects of these drugs are additive. Cytochrome P450 1 A2 is involved in the formation of 3-hydroxy ropivacaine, the major metabolite.

In vivo , the plasma clearance of ropivacaine was reduced by 70% during coadministration of fluvoxamine (25 mg bid for 2 days), a selective and potent CYPIA2 inhibitor. Thus strong inhibitors of cytochrome P4501A2, such as fluvoxamine, given concomitantly during administration of Ropivacaine hydrochloride, can interact with Ropivacaine hydrochloride leading to increased ropivacaine plasma levels. Caution should be exercised when CYPlA2 inhibitors are coadministered.

Possible interactions with drugs known to be metabolized by CYPIA2 via competitive inhibition such as theophylline and imipramine may also occur. Coadministration of a selective and potent inhibitor of CYP3A4, ketoconazole (100 mg bid for 2 days with ropivacaine infusion administered 1 hour after ketoconazole) caused a 15% reduction in in vivo plasma clearance of ropivacaine. Patients that are administered local anesthetics are at increased risk of developing methemoglobinemia when concurrently exposed to the following drugs, which could include other local anesthetics: Examples of Drugs Associated with Methemoglobinemia: Class Examples Nitrates/Nitrites nitric oxide, nitroglycerin, nitroprusside, nitrous oxide Local anesthetics articaine, benzocaine, bupivacaine, lidocaine, mepivacaine, prilocaine, procaine, ropivacaine, tetracine Antineoplastic agents cyclophosphamide, flutamide, hydroxyurea, ifosfamide, rasburicase Antibiotics dapsone, nitrofurantoin, para-aminosalicylic acid, sulfonamides Antimalarials chloroquine, primaquine Anticonvulsants phenobarbital, phenytoin, sodium valproate Other drugs acetaminophen, metoclopramide, quinine, sulfasalazine

🤰 Pregnancy ~2 min read ▾

Pregnancy Category B Reproduction toxicity studies have been performed in pregnant New Zealand white rabbits and Sprague-Dawley rats. During gestation days 6 to 18, rabbits received 1.3, 4.2, or 13 mg/kg/day subcutaneously. In rats, subcutaneous doses of 5.3, 11 and 26 mg/kg/day were administered during gestation days 6 to 15.

No teratogenic effects were observed in rats and rabbits at the highest doses tested. The highest doses of 13 mg/kg/day (rabbits) and 26 mg/kg/day (rats) are approximately 1/3 of the maximum recommended human dose (epidural, 770 mg/24 hours) based on a mg/m 2 basis. In 2 prenatal and postnatal studies, the female rats were dosed daily from day 15 of gestation to day 20 postpartum.

The doses were 5.3, 11 and 26 mg/kg/day subcutaneously. There were no treatment-related effects on late fetal development, parturition, lactation, neonatal viability, or growth of the offspring. In another study with rats, the males were dosed daily for 9 weeks before mating and during mating.

The females were dosed daily for 2 weeks before mating and then during the mating, pregnancy, and lactation, up to day 42 post coitus. At 23 mg/kg/day, an increased loss of pups was observed during the first 3 days postpartum. The effect was considered secondary to impaired maternal care due to maternal toxicity.

There are no adequate or well-controlled studies in pregnant women of the effects of Ropivacaine Hydrochloride on the developing fetus. Ropivacaine Hydrochloride should only be used during pregnancy if the benefits outweigh the risk. Teratogenicity studies in rats and rabbits did not show evidence of any adverse effects on organogenesis or early fetal development in rats (26 mg/kg sc) or rabbits (13 mg/kg).

The doses used were approximately equal to total daily dose based on body surface area. There were no treatment-related effects on late fetal development, parturition, lactation, neonatal viability, or growth of the offspring in 2 perinatal and postnatal studies in rats, at dose levels equivalent to the maximum recommended human dose based on body surface area. In another study at 23 mg/kg, an increased pup loss was seen during the first 3 days postpartum, which was considered secondary to impaired maternal care due to maternal toxicity.

🧒 Pediatric Use 16 words ▾

Pediatric Use The safety and efficacy of Ropivacaine Hydrochloride in pediatric patients have not been established.

🧓 Geriatric Use 191 words ▾

Geriatric Use Of the 2,978 subjects that were administered Ropivacaine Hydrochloride Injection in 71 controlled and uncontrolled clinical studies, 803 patients (27%) were 65 years of age or older which includes 127 patients (4%) 75 years of age and over. Ropivacaine Hydrochloride Injection was found to be safe and effective in the patients in these studies. Clinical data in one published article indicate that differences in various pharmacodynamic measures were observed with increasing age.

In one study, the upper level of analgesia increased with age, the maximum decrease of mean arterial pressure (MAP) declined with age during the first hour after epidural administration, and the intensity of motor blockade increased with age. This drug and its metabolites are known to be excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Elderly patients are more likely to have decreased hepatic, renal, or cardiac function, as well as concomitant disease.

Therefore, care should be taken in dose selection, starting at the low end of the dosage range, and it may be useful to monitor renal function (see PHARMACOKINETICS, Elimination ).

🆘 Overdosage 44 words ▾

OVERDOSAGE Acute emergencies from local anesthetics are generally related to high plasma levels encountered or large doses administered, during therapeutic use of local anesthetics or to unintended subarachnoid or intravascular injection of local anesthetic solution (see ADVERSE REACTIONS , WARNINGS , and PRECAUTIONS ).

🧬 Clinical Pharmacology 108 words ▾

CLINICAL PHARMACOLOGY Mechanism of Action Ropivacaine is a member of the amino amide class of local anesthetics and is supplied as the pure S-(-)-enantiomer. Local anesthetics block the generation and the conduction of nerve impulses, presumably by increasing the threshold for electrical excitation in the nerve, by slowing the propagation of the nerve impulse, and by reducing the rate of rise of the action potential. In general, the progression of anesthesia is related to the diameter, myelination and conduction velocity of affected nerve fibers.

Clinically, the order of loss of nerve function is as follows: (1) pain, (2) temperature, (3) touch, (4) proprioception, and (5) skeletal muscle tone.

🧬 Mechanism of Action 106 words ▾

Mechanism of Action Ropivacaine is a member of the amino amide class of local anesthetics and is supplied as the pure S-(-)-enantiomer. Local anesthetics block the generation and the conduction of nerve impulses, presumably by increasing the threshold for electrical excitation in the nerve, by slowing the propagation of the nerve impulse, and by reducing the rate of rise of the action potential. In general, the progression of anesthesia is related to the diameter, myelination and conduction velocity of affected nerve fibers.

Clinically, the order of loss of nerve function is as follows: (1) pain, (2) temperature, (3) touch, (4) proprioception, and (5) skeletal muscle tone.

📦 How Supplied / Storage and Handling ~1 min read ▾

HOW SUPPLIED Ropivacaine Hydrochloride Injection USP, 0.2% (2 mg/mL) is a clear, colorless solution supplied in 100 mL and 200 mL infusion bottles packaged individually as follows: NDC 17478-082-90 100 mL Infusion Bottle, carton of 6 NDC 17478-082-92 200 mL Infusion Bottle, carton of 6 The solubility of ropivacaine is limited at pH above 6. Thus, care must be taken as precipitation may occur if Ropivacaine Hydrochloride is mixed with alkaline solutions. Disinfecting agents containing heavy metals, which cause release of respective ions (mercury, zinc, copper, etc.) should not be used for skin or mucous membrane disinfection since they have been related to incidents of swelling and edema.

When chemical disinfection of the container surface is desired, either isopropyl alcohol (91%) or ethyl alcohol (70%) is recommended. It is recommended that chemical disinfection be accomplished by wiping the bottle stopper thoroughly with cotton or gauze that has been moistened with the recommended alcohol just prior to use. Glass containers may, as an alternative, be autoclaved once.

Stability has been demonstrated using a targeted F 0 of 7 minutes at 121ºC. Solutions should be stored at 20º to 25°C (68º to 77°F) [see USP Controlled Room Temperature]. These products are intended for single use and are free from preservatives.

Any solution remaining from an opened container should be discarded promptly. In addition, continuous infusion bottles should not be left in place for more than 24 hours. Rx only AKORN Manufactured by: Akorn, Inc.

Lake Forest, IL 60045 RPA0N Rev. 12/18

📋 Description 201 words ▾

DESCRIPTION Ropivacaine Hydrochloride Injection contains ropivacaine HCl which is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection is a sterile, isotonic solution that contains the enantiomerically pure drug substance, sodium chloride for isotonicity and Water for Injection. Sodium hydroxide and/or hydrochloric acid may be used for pH adjustment.

It is administered parenterally. Ropivacaine HCl is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following molecular formula of C 17 H 26 N 2 O•HCl•H 2 O, molecular weight of 328.89 and the following structural formula At 25°C ropivacaine HCl has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in

0.1M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine.

Ropivacaine Hydrochloride Injection is preservative-free and is available in a single dose container in 2 mg/mL (0.2%) concentration. The specific gravity of Ropivacaine Hydrochloride Injection solutions range from 1.00 to 1.01 at 25°C. Structural Formula

💬 Information for Patients 111 words ▾

Information for Patients When appropriate, patients should be informed in advance that they may experience temporary loss of sensation and motor activity in the anesthetized part of the body following proper administration of lumbar epidural anesthesia. Also, when appropriate, the physician should discuss other information including adverse reactions in the Ropivacaine Hydrochloride package insert. Inform patients that use of local anesthetics may cause methemoglobinemia, a serious condition that must be treated promptly.

Advise patients or caregivers to seek immediate medical attention if they or someone in their care experience the following signs or symptoms: pale, gray, or blue colored skin (cyanosis); headache; rapid heart rate; shortness of breath; lightheadedness; or fatigue.

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
← 17445-6034-00 · Sigma-Aldrich 17504-0007-02 · Lonza →
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.