SODIUM SULFACETAMIDE, SULFUR 100 mg/g; 50 mg/g Liquid, 227 g — NDC 69367-0247-08 package photo

SODIUM SULFACETAMIDE, SULFUR 100 mg/g; 50 mg/g Liquid, 227 g

by Westminster Pharmaceuticals, LLC · 227 g in 1 BOTTLE (69367-247-08)
NDC 69367-0247-08
🏷️ FDA NDC (as labeled) 69367-247-08 billing pads the product segment with a zero
This package
Contains227 g Cost per g$0.3906 NADAC Per package$88.67 / 227 g Pack sizes3 compare ↓
Rx only On market Non-controlled
🗂️ Data synced Jul 24, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

🆔 Identity & classification

FDA NDC (as labeled) 69367-247-08
Product NDC 69367-247
11-digit billing NDC 69367024708
NCPDP billing unit GM — per gram (weight)
RxCUI 999613
UNII 4NRT660KJQ, 70FD1KFU70
UPC 0369367247061
SPL Set ID 6b7e2859-d149-4116-bd98-d6d096266b04
Established class (EPC) Sulfonamide Antibacterial
Chemical class Sulfonamides
DEA schedule Non-controlled
Marketing category UNAPPROVED DRUG OTHER
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 2020-05-05
Route TOPICAL
Dosage form LIQUID
Substance SULFACETAMIDE SODIUM; SULFUR
GPI-14 90059903200927
GPI class Sulfacetamide Sodium-Sulfur
GCN Seq No 045670
GCN 48810
HICL code 003344
Ingredient (HICL) Sulfacetamide Sodium/Sulfur
HIC1 code Q
Therapeutic class — broad (HIC1) Ear/Eye/Nose/Rectum/Topical/Vagina/Other
HIC2 code Q5
Therapeutic class — intermediate (HIC2) Agents Acting Principally On The Skin
HIC3 code Q5S
Therapeutic class — specific (HIC3) Topical Sulfonamides
AHFS code 84:04.92.00
AHFS class Local Anti-Infectives, Miscellaneous
FDB label name SOD SULFACET-SULFUR 10-5% CLSR
FDB brand name Sodium Sulfacetamide-Sulfur
Legend status F — Federal legend — prescription drug or device
Why two NDCs? The FDA registers this code as 69367-247-08 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 69367-0247-08. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Sulfonamide Antibacterial class.

Pharmacologic class Sulfonamide Antibacterial
Drug family (ATC) Antiinfectives for treatment of acne, Sulfonamides
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerWestminster Pharmaceuticals, LLC
Labeler code69367
First marketedMay 2020
Product typeHuman Prescription Drug
Portfolio186 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Label name SOD SULFACET-SULFUR 10-5% CLSR Ingredient Sulfacetamide Sodium/Sulfur
🧪 What is this product?

This is a topical liquid containing sodium sulfacetamide and sulfur. Sulfacetamide sodium is an antimicrobial agent commonly used in skin preparations, while sulfur is a keratolytic ingredient often included in products intended for acne-prone or inflamed skin. The combination is typically used to address bacterial and fungal skin conditions. This product is marketed without an approved FDA application.

Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • UNII V5VD430YW9
    A plant-derived substance from the aloe vera leaf. Used in medicines as a natural flavor, skin-soothing agent in topical products, and sometimes as a mild laxative ingredient in oral formulations.
  • UNII 1P9D0Z171K
    BHT is a synthetic antioxidant that prevents fats and oils in medicines from breaking down and becoming rancid. It helps keep the product stable and effective during storage.
  • UNII 936JST6JCN
    Cetyl alcohol is a waxy, fatty substance derived from plant or animal sources. It acts as an emulsifier and thickener in medicines, helping blend oil and water components and giving products a smooth, creamy texture.
  • UNII 2968PHW8QP
    A weak organic acid derived from citrus fruits or made through fermentation. It works as a buffer to control pH, a preservative to extend shelf life, and a flavoring agent in medications.
  • UNII 5OCF3O11KX
    A plant-derived surfactant made from coconut oil. It helps mix oil and water ingredients together in the formulation and can improve how the medicine spreads or feels on the skin.
  • UNII 8NLQ36F6MM
    Edetate disodium anhydrous is a chemical compound that binds to metal ions in a medicine. It's used as a stabilizer to prevent unwanted chemical reactions and help keep the drug product effective during storage.
  • UNII PDC6A3C0OX
    Glycerin is a clear, thick liquid derived from plant oils or fats. It acts as a humectant to retain moisture, a sweetener, and a solvent in medications.
  • UNII FCZ5MH785I
    A waxy substance made from glycerin and stearic acid. It works as an emulsifier to help mix oil and water ingredients together, and as a thickener to give the medicine its proper texture and consistency.
  • UNII YD01N1999R
    A waxy substance made from polyethylene glycol and stearic acid. It helps mix oil and water-based ingredients together and serves as an emulsifier and solubilizer in liquid and semi-solid medicines.
  • UNII HIE492ZZ3T
    Phenoxyethanol is a synthetic preservative and antimicrobial agent used to prevent bacterial and fungal growth in medicines and cosmetic products, extending shelf life and maintaining product safety.
  • UNII BPV390UAP0
    Sodium laureth sulfate is a mild detergent and surfactant derived from coconut oil or petroleum. It helps mix oil and water in formulations and is often used as a cleaning or foaming agent in topical products like shampoos and cleansers.
  • UNII HX1032V43M
    Sodium thiosulfate is a salt compound used in medicines as a buffer and pH regulator. It helps stabilize the medication and may also serve as a preservative or antioxidant to maintain product quality.
  • UNII 2KR89I4H1Y
    Stearyl alcohol is a waxy, fatty substance derived from natural oils or made synthetically. It acts as an emulsifier and thickener in medicines, helping mix ingredients together and give the product the right texture.
  • UNII XHX3C3X673
    Triacetin is a clear, oily liquid made from glycerin and acetic acid. It works as a plasticizer and solvent in medicines, helping soften coatings and improve how liquids mix together in formulations.
  • UNII 059QF0KO0R
    Water is a liquid solvent that dissolves and mixes ingredients together in liquid medicines, syrups, and injections. It helps distribute the active drug evenly throughout the product.
  • UNII TTV12P4NEE
    Xanthan gum is a thickening and stabilizing ingredient made from fermented corn or other sugars. It's added to medicines to improve texture, prevent separation of liquids and solids, and help the product stay consistent.

16 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMed — ingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer gPer package
Retail pharmacies payNADAC · weekly $0.391 $88.67 / 227 g
Medicaid paysCMS SDUD · 12 mo No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · quarterly No Part D plan price is available for this NDC in our data.
NADAC price history (per g) — tap or hover for the price & month
Dec 2025 Mar 2026 Jun 2026 Sep 2026 $0.577 $0.322
▼ Down 19% over the last 10 months.
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Sodium Sulfacetamide and Sulfur 100 mg/g; 50 mg/g 58657-0472-06 Method 170 g $0.089 — Availability likely save 77%
Sodium Sulfacetamide 10 Sulfur 5 Cleanser 10 mg/g; 5 mg/g 42192-0136-06 Acella 170.3 g $0.153 — Availability likely save 61%
Sodium Sulfacetamide, Sulfur 100 mg/g; 50 mg/gthis 69367-0247-08 Westminster 227 g $0.391 — Availability likely —
Avar 100 mg/g; 50 mg/g 00178-0480-08 Mission 227 g — — FDA listed —
Sulfacetamide Sodium, Sulfur 50 mg/g; 100 mg/g 24470-0925-08 Cintex 227 g — — FDA listed —
Sodium Sulfacetamide, Sulfur 100 mg/g; 50 mg/g 24470-0953-06 Cintex 170.3 g — — FDA listed —
Sulfacetamide Sodium, Sulfur 100 mg/g; 50 mg/g 44523-0560-08 BioComp 227 g — — FDA listed —
Sodium Sulfacetamide 10 % and Sulfur 5 % Cleanser 100 mg/g; 50 mg/g 50405-0850-01 SOHM, 170 g — — FDA listed —
Sodium Sulfacetamide, Sulfur 100 mg/g; 50 mg/g 52187-0536-06 KMM 170.3 g — — FDA listed —
Sodium Sulfacetamide and Sulfur 100 mg/g; 50 mg/g 63629-9259-01 Bryant 170 g — — FDA listed —
Sodium Sulfacetamide and Sulfur 100 mg/g; 50 mg/g 63629-9260-01 Bryant 170.3 g — — FDA listed —
Sodium Sulfacetamide and Sulfur 100 mg/g; 50 mg/g 63629-9261-01 Bryant 227 g — — FDA listed —
Sodium Sulfacetamide and Sulfur 100 mg/g; 50 mg/g 71335-2940-01 Bryant 227 g — — FDA listed —
Sodium Sulfacetamide 10% and Sulfur 5% Cleanser 100 mg/g; 50 mg/g 71399-0488-06 Akron 170.3 g — — FDA listed —
Sodium Sulfacetamide and Sulfur 100 mg/g; 50 mg/g 72162-1664-02 Bryant 277 g — — FDA listed —
Sulfacetamide Sodium, Sulfur 50 mg/mL; 100 mg/mL 81542-0202-12 Bantry 355 ml — — FDA listed —
Sodium Sulfacetamide 10% and Sulfur 5% Cleanser 100 mg/g; 50 mg/g 83720-0547-06 Oncor 170 g — — FDA listed —
Sodium Sulfacetamide, Sulfur 100 mg/g; 50 mg/g 87026-0202-06 Aspen 170 g — — FDA listed —
About this product: other versions of the same ingredient, strength and form are listed above, least expensive first, with FDA equivalence ratings where available.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

⏳ Availability & generic status

🏛️
2020
On the market since
May 2020
📍
2026
Currently FDA-listed
6 years listed
🔒
·
No generic listed yet
brand only
ℹ️No FDA-approved generic found

We did not find an FDA-approved generic match for this exact strength, form and route.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

💊 Medicaid utilization by pack size

Medicaid (SDUD) totals over the four most recent reported quarters for every package size of this drug — handy when a specific package (e.g. a starter/titration pack) carries little or no Medicaid volume on its own.
170.3 g69367-0247-06 41 Rx · $1,686
340.2 g69367-0247-12 No Medicaid data
227 g this page69367-0247-08 No Medicaid data
Drug total (last 4 qtrs): 41 Rx · 6,982 units · $1,686 gross reimbursed
Tap a pack size to open its page. Source: CMS State Drug Utilization Data, last 4 quarters.

📊 Medicare Part D spend CMS · PART D · 2026 (Q1)

Medicare Part D (outpatient prescription) spending for Sodium Sulfacetamide-Sulfur — the program that covers self-administered drugs. 1 manufacturer.
⚠️ Drug-level data: CMS publishes Part D spending by drug, not by NDC — these figures combine every manufacturer, strength and package size sold under the name Sodium Sulfacetamide-Sulfur. That’s a different level of aggregation than the Medicaid card above, which is specific to this exact 11-digit NDC (pack size included), so the two aren’t directly comparable.
Period
Total Part D spend
$21.7K
Claims incl. refills
79
Beneficiaries
63
Spend / beneficiary
$344.29
Spend / claim
$274.56
Trend by period
💵 About the dollar figures: spending is what Part D plans paid before confidential manufacturer rebates, so the program’s real net cost is lower. A blank patient count means fewer than 11 people — CMS hides counts that small to protect privacy. Source: CMS Medicare Quarterly Part D Spending by Drug (data.cms.gov), updated quarterly.

📦 Packaging — all sizes for this product

Package NDCDescription Per unit Per pack Marketing startStatus
69367-0247-06 170.3 g in 1 BOTTLE (69367-247-06) $0.1534 / g $26.13 2020-05-05 Active
69367-0247-12 340.2 g in 1 BOTTLE (69367-247-12) $0.1464 / g $49.82 2020-05-05 Active
69367-0247-08 You're viewing this 227 g in 1 BOTTLE (69367-247-08) $0.3906 / g $88.66 2025-06-30 Active

Per g, this pack runs about 167% above the cheapest pack (340.2 g in 1 BOTTLE (693, $0.1464 vs $0.3906 NADAC).

Pack size FAQ

What quantity is in NDC 69367-0247-08?
NDC 69367-0247-08 contains 227 g — 227 g in 1 bottle.
What is the difference between NDC 69367-0247-08 and NDC 69367-0247-06?
Both are SODIUM SULFACETAMIDE, SULFUR 100 mg/g; 50 mg/g Liquid — the drug itself is identical. NDC 69367-0247-08 is the 227 g package, while NDC 69367-0247-06 is the 170.3 g package. Per-g NADAC also differs: $0.3906 here vs $0.1534 for the 170.3 g pack.
What NDC number is used to bill for this package of SODIUM SULFACETAMIDE, SULFUR 100 mg/g; 50 mg/g Liquid?
Bill NDC 69367-0247-08 — the 11-digit billing format is 69367024708. Pharmacy and medical claims use the 11-digit form; the FDA label may print a shorter form of the same code.

Prices are the latest CMS NADAC pharmacy acquisition cost per NDC; per-pack figures are per-unit × pack quantity, shown only when the pack is denominated in the same measure NADAC prices.

🧭 About this NDC listing & data coverage

Finished prescription product Marketed without an FDA application

Listed without an FDA application

This product's marketing category indicates it is marketed without an approved FDA application (no NDA, ANDA, or BLA on file). Having an NDC does not by itself establish FDA approval — the NDC Directory is a listing system, not an approval decision. Approval-linked data such as Orange Book therapeutic-equivalence ratings therefore does not apply.

What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos ✓ Available
Inactive ingredients (structured) ✓ Available
NADAC pharmacy acquisition price (CMS) ✓ Available
Orange Book / therapeutic-equivalence data — Not published for this NDC Applies only to products approved under an NDA/ANDA; many listings are out of scope.
HCPCS J-code billing crosswalk — Not published for this NDC Most self-administered / retail products have no J-code — that is normal.
Medicaid utilization (CMS SDUD) — Not published for this NDC CMS reports utilization only for NDCs with Medicaid claims above its privacy threshold.
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Is this NDC FDA-approved?
An NDC listing does not by itself establish FDA approval — the NDC Directory records that a product is listed with FDA, not that it was reviewed and approved. This listing's marketing category is "Unapproved Drug Other". Products approved under an application carry an NDA, ANDA, or BLA number.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The FDA registers it as 69367-247-08, which is what is printed on the packaging and shown on DailyMed. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero: 69367-0247-08, written without dashes as 69367024708. The Identity section at the top of this page lists every form of this code.
What do the three segments of this NDC mean?
In 69367-0247-08, the first segment (69367) is the labeler code FDA assigned to Westminster Pharmaceuticals, LLC; the middle segment (0247) identifies this specific product — its ingredient, strength, and dosage form; and the last segment (08) identifies this exact package size and type. Together they name one specific package of one specific product.
Is this package still being marketed?
Yes, per the latest FDA NDC Directory data on this page: this package is listed as actively marketed, with no marketing end date reported by Westminster Pharmaceuticals, LLC. Listing status can change — the directory data on this page refreshes weekly.
Does this product come in other package sizes?
Yes — the FDA directory lists 2 other package presentations of this same product, including 170.3 g (69367-0247-06), 340.2 g (69367-0247-12). Each has its own NDC and its own page — see the package list near the top of this page.
Who lists this product with the FDA?
Westminster Pharmaceuticals, LLC is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🎯 Indications and Usage 22 words ▾

INDICATIONS Sodium Sulfacetamide 10% and Sulfur 5% Cleanser is indicated in the topical control of acne vulgaris, acne rosacea and seborrheic dermatitis.

⏱️ Dosage and Administration 73 words ▾

DOSAGE AND ADMINISTRATION Apply Sodium Sulfacetamide 10% and Sulfur 5% Cleanser once or twice daily to affected areas, or as directed by your physician. Wet skin and liberally apply to areas to be cleansed. Massage gently into skin for 10-20 seconds, working into a full lather, rinse thoroughly and pat dry. If drying occurs, it may be controlled by rinsing off Sodium Sulfacetamide 10% and Sulfur 5% Cleanser sooner or using less often.

⛔ Contraindications 44 words ▾

CONTRAINDICATIONS Sodium Sulfacetamide 10% and Sulfur 5% Cleanser is contraindicated for use by patients having known hypersensitivity to sulfonamides, sulfur or any other component of this preparation. Sodium Sulfacetamide 10% and Sulfur 5% Cleanser is not to be used by patients with kidney disease.

⚠️ Warnings 96 words ▾

WARNINGS Although rare, sensitivity to sodium sulfacetamide may occur. Therefore, caution and careful supervision should be observed when prescribing this drug for patients who may be prone to hypersensitivity to topical sulfonamides. Systemic toxic reactions such as agranulocytosis, acute hemolytic anemia, purpura hemorrhagica, drug fever, jaundice, and contact dermatitis indicate hypersensitivity to sulfonamides.

Particular caution should be employed if areas of denuded or abraded skin are involved. FOR EXTERNAL USE ONLY. Keep away from eyes. keep out of reach of children.

In case of accidental ingestion contact a poison control center immediately. Keep container tightly closed.

🤒 Adverse Reactions 31 words ▾

ADVERSE REACTIONS Although rare, sodium sulfacetamide may cause local irritation. Call your doctor for medical advice about side effects. To report a serious adverse event, please contact Westminster Pharmaceuticals at 1-844-221-7294

🤰 Pregnancy 64 words ▾

Pregnancy Category C Animal reproduction studies have not been conducted with Sodium Sulfacetamide 10% and Sulfur 5% Cleanser. It is also not known whether Sodium Sulfacetamide 10% and Sulfur 5% Cleanser can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. Sodium Sulfacetamide 10% and Sulfur 5% Cleanser should be given to a pregnant woman only if clearly needed.

🧒 Pediatric Use 16 words ▾

Pediatric Use Safety and effectiveness in children under the age of 12 have not been established.

🧬 Clinical Pharmacology 111 words ▾

CLINICAL PHARMACOLOGY The most widely accepted mechanism of action of sulfonamides is the Woods-Fildes theory, which is based on the fact that sulfonamides act as competitive antagonists to para-aminobenzoic acid (PABA), an essential component for bacterial growth. While absorption through intact skin has not been determined, sodium sulfacetamide is readily absorbed from the gastrointestinal tract when taken orally and excreted in the urine, largely unchanged. The biological half-life has variously been reported as 7 to 12.8 hours.

The exact mode of action of sulfur in the treatment of acne is known, but it has been reported that it inhibits the growth of Propionibacterium acnes and the formation of free fatty acids.

📦 How Supplied / Storage and Handling 44 words ▾

HOW SUPPLIED Sodium Sulfacetamide 10% and Sulfur 5% Cleanser is available in 6 oz. (170.3 g) bottles, NDC 69367-247-06, 8 oz. (227 g), NDC 69367-247-08, and 12 oz. (340.2 g) bottles, NDC 69367-247-12. Store at 15°C to 30°C (59°F to 86°F). Protect from freezing.

📦 Storage and Handling 11 words ▾

Store at 15°C to 30°C (59°F to 86°F). Protect from freezing.

📋 Description 89 words ▾

DESCRIPTION Each gram of Sodium Sulfacetamide 10% and Sulfur 5% Cleanser contains 100 mg of sodium sulfacetamide and 50 mg of sulfur in a formulation containing Aloe Vera Leaf Extract, Butylated Hydroxytoluene, Cetyl Alcohol, Citric Acid, Cocamidopropyl Betaine, Disodium EDTA, Glycerin, Glyceryl Stearate SE, PEG-100 Stearate, Phenoxyethanol, Purified Water, Sodium Laureth Sulfate, Sodium Thiosulfate, Stearyl Alcohol, Triacetin, Xanthan Gum. Sodium sulfacetamide is a sulfonamide with antibacterial activity while sulfur acts as a keratolytic agent.

Chemically sodium sulfacetamide is N-[(4-aminophenyl) sulfonyl]-acetamide, monosodium salt, monohydrate. The structural formula is: Chemical Structure

💬 Information for Patients 29 words ▾

Information for Patients Avoid contact with eyes, eyelids, lips and mucous membranes. If accidental contact occurs, rinse with water. If excessive irritation develops, discontinue use and consult your physician.

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.