NDC 00487-4301-10 — Sodium Chloride 9 mg/mL Injection

🆔 Identity & classification

FDA NDC (as labeled) 0487-4301-10

Product NDC 0487-4301

11-digit billing NDC 00487430110

NCPDP billing unit ML — per mL (volume)

RxCUI 1807631, 1807632, 1807633, 1807634

UNII 451W47IQ8X

UPC 0304874301257, 0000000000000, 0304874301509, 0304874301059 +1 more

Application # ANDA211968

SPL Set ID a4edf2d5-a9ff-30d4-e053-2995a90a5650

DEA schedule Non-controlled

Marketing category ANDA

Marketing status On market

FDA listing status Listed (active directory)

Marketing start 2020-06-04

Route INTRAVENOUS

Dosage form INJECTION

Substance SODIUM CHLORIDE

GPI-14 79750010002021

GPI class Sodium Chloride

GCN Seq No 001210

GCN 02962

HICL code 008255

Ingredient (HICL) 0.9 % Sodium Chloride

HIC1 code C

Therapeutic class — broad (HIC1) Electrolyte Balance/Metabolism/Nutrition

HIC2 code C1

Therapeutic class — intermediate (HIC2) Drugs Affecting Electrolyte Balance

HIC3 code C1B

Therapeutic class — specific (HIC3) Sodium/Saline Preparations

AHFS code 40:12.00.00

AHFS class Replacement Preparations

FDB label name SODIUM CHLORIDE 0.9% SOLUTION

FDB brand name Sodium Chloride

Legend status F — Federal legend — prescription drug or device

TE code (Orange Book) AP · RLD · RS

Why two NDCs? The FDA registers this code as 0487-4301-10 — a 4-4-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the labeler segment → 00487-4301-10. Same drug, same package — only the format differs.

Where does this data come from?

Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Sodium class.

Drug family (ATC) Sodium, Salt solutions, Electrolyte solutions

Where does this data come from?

Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerNephron Pharmaceuticals Corporation

Application holderNEPHRON PHARMACEUTICALS CORPORATION

FDA applicationANDA211968 (ANDA)

Labeler code00487

First marketedJun 2020

Product typeHuman Prescription Drug

Portfolio12 products on file

🔎 All NDCs from Nephron Pharmaceuticals Corporation

The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).

Where does this data come from?

Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Label name SODIUM CHLORIDE 0.9% SOLUTION Ingredient 0.9 % Sodium Chloride

📗 Our plain-language guide HelloPharmacist

Yes, exactly. Saline is just sodium chloride dissolved in water — it's essentially a sterile salt-water solution. Depending on the concentration and form, it can be used as an IV f...
I've heard of saline solution — is that the same thing as sodium chloride?
In some situations — like after surgery, during serious illness, or when someone can't take anything by mouth — the body needs fluids and electrolytes delivered directly into the b...
Why would someone need sodium chloride through an IV? Can't you just drink water?

📖 Read our full Sodium Chloride guide →

Patient education

📘 MedlinePlus patient leaflet ↗

Supplement & herbal interactions

Some supplements/herbs that may interact with Sodium Chloride — tap one for details:

Activated CharcoalMajor Coffee CharcoalModerate European MandrakeModerate GlucomannanModerate Guar GumModerate Gum ArabicModerate Slippery ElmModerate TragacanthModerate

🌿 Every supplement checked against Sodium Chloride (17 interactions) — ranked by severity →

Where does this data come from?

Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

Loading inactive ingredients from the official FDA label in the background. No external source is being called by this page request.

Where does this data come from?

Source: official FDA Structured Product Labeling (SPL) via DailyMed and the openFDA label index. Structured IACT rows and label-wide narrative are kept separate; availability and product-level specificity depend on the submitted label.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?

No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.

Why might an inactive ingredient be missing?

Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.

Can inactive ingredients matter?

Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price system	Per mL	Per package
Retail pharmacies payNADAC · weekly	$0.026	$167.68 / 6400 ml
Medicaid paysCMS SDUD · 12 mo	No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · Q2 2026	$0.0121	$77.44 / 6400 ml
Medicare Part B allowsASP · J7040	$1.350 / J7040 unit	—

NADAC price history (per mL) — tap or hover for the price & month

Where does this data come from?

NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🧾 Billing & reimbursement

FDA NDC (as labeled)0487-4301-10

11-digit billing NDC00487-4301-10

Format4-4-2 as registered → padded to 5-4-2 for billing (zero added to the labeler segment)

HCPCS J-codeJ7040

DescriptorINFUSION, NORMAL SALINE SOLUTION, STERILE (500 ML=1 UNIT)

Billing units / pkg0 units

Crosswalk sourcePDAC NDC-HCPCS crosswalk (DME MAC / DMEPOS)

Where does this data come from?

The HCPCS J-code crosswalk comes from the CMS ASP NDC-HCPCS crosswalk and the DMEPDAC (DME MAC) NDC-HCPCS crosswalk — free public CMS data. Billing units are derived from the code’s descriptor and the package amount.

🔁 Therapeutic equivalents

Product	Labeler	Pack	NADAC/unit	TE	Status	Price vs. this
Sodium Chloride 9 mg/mLthis 00487-4301-10	Nephron	100 ml	$0.026	AP	Availability likely	—
Sodium Chloride 9 mg/mL 00264-1800-31	B.	50 ml	—	AP	FDA listed	—
Sodium Chloride 9 mg/mL 00264-9375-88	B.	10 ml	—	AP	FDA listed	—
0.9% Sodium Chloride 9 mg/mL 51662-1577-01	HF	500 ml	—	AP	FDA listed	—
Sodium Chloride 9 mg/mL 63323-0186-02	Fresenius	25 vials	—	—	FDA listed	—
Sodium Chloride 9 mg/mL 63323-0632-40	Fresenius	1000 ml	—	AP	FDA listed	—
Sodium Chloride 9 mg/mL 65219-0328-50	Fresenius	1000 ml	—	AP	FDA listed	—
Sodium Chloride 9 mg/mL 65219-0432-85	Fresenius	500 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0466-60	Fresenius	50 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0468-50	Fresenius	100 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0470-30	Fresenius	250 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0472-20	Fresenius	500 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0474-10	Fresenius	1000 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 17271-0701-02	Becton	50 ml	—	AP	FDA listed	—
Sodium Chloride 9 mg/mL 00404-9955-10	Henry	1 vial	—	—	FDA listed	—
Sodium chloride 9 mg/mL 63323-0623-53	Fresenius	50 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0222-25	Fresenius	250 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 17271-0771-02	BECTON	50 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0224-50	Fresenius	500 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0218-50	Fresenius	50 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0220-10	Fresenius	100 ml	—	AP	FDA listed	—
Sodium chloride 9 mg/mL 65219-0282-10	Fresenius	1000 ml	—	AP	FDA listed	—
Sodium Chloride 9 mg/mL 55154-9357-05	Cardinal	5 vials	—	—	FDA listed	—

About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.

Where does this data come from?

Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

⏳ Availability & generic status

🏛️

2020

On the market since

Jun 2020

📍

2026

Currently FDA-listed

6 years listed

🔓

·

Generic on the market

this product is a generic

✅This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?

Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

💊 Medicaid utilization by pack size

Medicaid (SDUD) totals over the four most recent reported quarters for every package size of this drug — handy when a specific package (e.g. a starter/titration pack) carries little or no Medicaid volume on its own.

5 ml00487-4301-50 235 Rx · $7,330

25 ml00487-4301-25 17 Rx · $964

5 ml00487-4301-05 No Medicaid data

1 ml this page00487-4301-10 No Medicaid data

Drug total (last 4 qtrs): 252 Rx · 456,250 units · $8,294 gross reimbursed

Tap a pack size to open its page. Source: CMS State Drug Utilization Data, last 4 quarters.

📊 Medicare Part D spend CMS · PART D · 2026 (Q1)

Medicare Part D (outpatient prescription) spending for Sodium Chloride — the program that covers self-administered drugs. 9 manufacturers.

⚠️ Drug-level data: CMS publishes Part D spending by drug, not by NDC — these figures combine every manufacturer, strength and package size sold under the name Sodium Chloride. That’s a different level of aggregation than the Medicaid card above, which is specific to this exact 11-digit NDC (pack size included), so the two aren’t directly comparable.

Period

Total Part D spend

$2.42M

Claims incl. refills

105K

Beneficiaries

50.3K

Spend / beneficiary

$48.15

Spend / claim

$23.08

Trend by period

💵 About the dollar figures: spending is what Part D plans paid before confidential manufacturer rebates, so the program’s real net cost is lower. A blank patient count means fewer than 11 people — CMS hides counts that small to protect privacy. Source: CMS Medicare Quarterly Part D Spending by Drug (data.cms.gov), updated quarterly.

📦 Packaging — all sizes for this product

Package NDC	Description	Per unit	Per pack	Marketing start	Status
00487-4301-05	64 BAG in 1 CASE (0487-4301-05) / 50 mL in 1 BAG	—	—	2020-06-04	Active
00487-4301-10 You're viewing this	64 BAG in 1 CASE (0487-4301-10) / 100 mL in 1 BAG	$0.0262 / mL	$167.87	2020-06-04	Active
00487-4301-25	35 BAG in 1 CASE (0487-4301-25) / 250 mL in 1 BAG	—	—	2020-06-04	Active
00487-4301-50	18 BAG in 1 CASE (0487-4301-50) / 500 mL in 1 BAG	—	—	2020-06-04	Active

This pack shows little to no recent Medicaid volume — a different pack size carries most fills. See all packs ↓

Pack size FAQ

What quantity is in NDC 00487-4301-10?

NDC 00487-4301-10 is listed by the FDA — 64 bag in 1 case / 100 ml in 1 bag.

What NDC number is used to bill for this package of Sodium Chloride 9 mg/mL Injection?

Bill NDC 00487-4301-10 — the 11-digit billing format is 00487430110. Pharmacy and medical claims use the 11-digit form; the FDA label may print a shorter form of the same code.

Prices are the latest CMS NADAC pharmacy acquisition cost per NDC; per-pack figures are per-unit × pack quantity, shown only when the pack is denominated in the same measure NADAC prices.

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.

🎯 Indications and Usage ⏱️ Dosage and Administration ⛔ Contraindications ⚠️ Warnings 🤒 Adverse Reactions 🔄 Drug Interactions 🤰 Pregnancy 🧒 Pediatric Use 🧓 Geriatric Use 🆘 Overdosage 🧬 Clinical Pharmacology 📦 How Supplied / Storage and Handling 📋 Description 💬 Information for Patients

🎯 Indications and Usage 33 words ▾

INDICATIONS AND USAGE Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.

⏱️ Dosage and Administration ~1 min read ▾

DOSAGE AND ADMINISTRATION Important Administration Instructions Sodium Chloride Injection, USP is intended for intravenous administration using sterile equipment. Do not connect flexible plastic containers in series in order to avoid air embolism due to possible residual air contained in the primary container. Set the vent to the closed position on a vented intravenous administration set to prevent air embolism.

Use a dedicated line without any connections to avoid air embolism. Do not pressurize intravenous solutions contained in flexible plastic containers to increase flow rates in order to avoid air embolism due to incomplete evacuation of residual air in the container. Prior to infusion, visually inspect the solution for particulate matter and discoloration.

The solution should be clear and there should be no precipitates. Do not administer unless solution is clear, and container is undamaged. Dosing Information The choice of product, dosage, volume, rate, and duration of administration is dependent upon the age, weight and clinical condition of the patient and concomitant therapy, and administration should be determined by a physician experienced in intravenous fluid therapy.

Introduction of Additives Additives may be incompatible. Evaluate all additions to the plastic container for compatibility and stability of the resulting preparation. Consult with a pharmacist, if available.

If, in the informed judgment of the physician, it is deemed advisable to introduce additives, use aseptic technique. Mix thoroughly when additives have been introduced. After addition, if there is a discoloration and/or the appearance of precipitates, insoluble complexes or crystals, do not use.

Do not store solutions containing additives. Discard any unused portion.

⛔ Contraindications 3 words ▾

CONTRAINDICATIONS None known.

⚠️ Warnings ~2 min read ▾

WARNINGS Hypersensitivity Hypersensitivity and infusion reactions, including hypotension, pyrexia, tremor, chills, urticaria, rash, and pruritus have been reported with 0.9% Sodium Chloride Injection, USP. Stop the infusion immediately if signs or symptoms of a hypersensitivity reaction develop, such as tachycardia, chest pain, dyspnea and flushing. Appropriate therapeutic countermeasures must be instituted as clinically indicated.

Electrolyte Imbalances Fluid Overload Depending on the volume and rate of infusion, and the patient’s underlying clinical condition, intravenous administration of Sodium Chloride Injection, USP can cause fluid disturbances such as overhydration/ hypervolemia and congested states, including pulmonary congestion and edema. Avoid 0.9% Sodium Chloride Injection, USP in patients with or at risk for fluid and/or solute overloading. If use cannot be avoided, monitor fluid balance, electrolyte concentrations, and acid base balance, as needed and especially during prolonged use.

Hyponatremia Sodium Chloride Injection, USP may cause hyponatremia. Hyponatremia can lead to acute hyponatremic encephalopathy characterized by headache, nausea, seizures, lethargy, and vomiting. Patients with brain edema are at particular risk of severe, irreversible and life-threatening brain injury.

The risk of hospital-acquired hyponatremia is increased in patients with cardiac or pulmonary failure, and in patients with non-osmotic vasopressin release (including SIADH) treated with high volume of Sodium Chloride Injection, USP. The risk for hyponatremia is increased in pediatric patients, elderly patients, postoperative patients, those with psychogenic polydipsia, and in patients treated with medications that increase the risk of hyponatremia (such as diuretics, certain antiepileptic and psychotropic medications).

See DRUG INTERACTIONS . Patients at increased risk for developing complications of hyponatremia such as hyponatremic encephalopathy, include pediatric patients, women (in particular pre-menopausal women), patients with hypoxemia, and patients with underlying central nervous system disease. Avoid Sodium Chloride Injection, USP in patients with or at risk for hyponatremia.

If use cannot be avoided, monitor serum sodium concentrations. Rapid correction of hyponatremia is potentially dangerous with risk of serious neurologic complications. Brain adaptations reducing risk of cerebral edema make the brain vulnerable to injury when chronic hyponatremia is too rapidly corrected, which is known as osmotic demyelination syndrome (ODS).

To avoid complications, monitor serum sodium and chloride concentrations, fluid status, acid-base balance, and signs of neurologic complications. Hypernatremia Hypernatremia may occur with Sodium Chloride Injection, USP. Conditions that may increase the risk of hypernatremia, fluid overload and edema (central and peripheral), include patients with: primary hyperaldosteronism; secondary hyperaldosteronism associated with, for example, hypertension, congestive heart failure, liver disease (including cirrhosis), renal disease (including renal artery stenosis, nephrosclerosis); and pre-eclampsia.

Certain medications, such as corticosteroids or corticotropin, may also increase risk of sodium and fluid retention, see DRUG INTERACTIONS . Avoid Sodium Chloride Injection, USP in patients with, or at risk for, hypernatremia. If use cannot be avoided, monitor serum sodium concentrations.

Rapid correction of hypernatremia is potentially dangerous with risk of serious neurologic complications. Excessively rapid correction of hypernatremia is also associated with a risk for serious neurologic complications such as osmotic demyelination syndrome (ODS) with risk of seizures and cerebral edema.

Hypersensitivity Hypersensitivity and infusion reactions, including hypotension, pyrexia, tremor, chills, urticaria, rash, and pruritus have been reported with 0.9% Sodium Chloride Injection, USP. Stop the infusion immedia…

🤒 Adverse Reactions 159 words ▾

ADVERSE REACTIONS Post-Marketing Adverse Reactions The following adverse reactions have been identified during postapproval use of Sodium Chloride Injection, USP. Because these reactions are reported voluntarily from a population of uncertain size, it is not always possible to reliably estimate their frequency or establish a causal relationship to drug exposure. The following adverse reactions have been reported in the post-marketing experience during use of Sodium Chloride Injection, USP and include the following: General disorders and administration site conditions : Infusion site erythema, injection site streaking, burning sensation, and infusion site urticaria Hypersensitivity reactions : Hypotension, pyrexia, tremor, chills, urticaria, rash, and pruritus.

Metabolism and nutrition disorders : Hypernatremia*, hyponatremia, hyperchloremic metabolic acidosis. Nervous System Disorders : Hyponatremic encephalopathy *Adverse reaction of hyponatremia is only related to 0.9% Sodium Chloride Injection, USP. If an adverse reaction does occur, discontinue the infusion, evaluate the patient, institute appropriate therapeutic countermeasures and save the remainder of the fluid for examination if deemed necessary.

🔄 Drug Interactions 198 words ▾

Drug Interactions Other Products that Affect Fluid and/or Electrolyte Balance Administration of Sodium Chloride Injection, USP to patients treated concomitantly with drugs associated with sodium and fluid retention may increase the risk of hypernatremia and volume overload. Avoid use of Sodium Chloride Injection, USP in patients receiving such products, such as corticosteroids or corticotropin. If use cannot be avoided, monitor serum electrolytes, fluid balance and acid-base balance.

Lithium Renal sodium and lithium clearance may be decreased during administration of 0.45% Sodium Chloride Injection, USP. Monitor serum lithium concentrations during concomitant use. Renal sodium and lithium clearance may be increased during administration of 0.9% Sodium Chloride Injection, USP.

Monitor serum lithium concentrations during concomitant use. Other Drugs that Increase the Risk of Hyponatremia Administration of Sodium Chloride Injection, USP in patients treated concomitantly with medications associated with hyponatremia may increase the risk of developing hyponatremia. Avoid use of Sodium Chloride Injection, USP in patients receiving products, such as diuretics, and certain antiepileptic and psychotropic medications.

Drugs that increase the vasopressin effect reduce renal electrolyte free water excretion and may also increase the risk of hyponatremia following treatment with intravenous fluids. If use cannot be avoided, monitor serum sodium concentrations.

🤰 Pregnancy 69 words ▾

Pregnancy There are no adequate and well controlled studies with Sodium Chloride Injection, USP in pregnant women and animal reproduction studies have not been conducted with this drug. Therefore, it is not known whether Sodium Chloride Injection, USP can cause fetal harm when administered to a pregnant woman. Sodium Chloride Injection, USP should be given during pregnancy only if the potential benefit justifies the potential risk to the fetus.

🧒 Pediatric Use 86 words ▾

Pediatric Use The use of Sodium Chloride Injection, USP in pediatric patients is based on clinical practice. (See DOSAGE AND ADMINISTRATION ). Closely monitor plasma electrolyte concentrations in pediatric patients who may have impaired ability to regulate fluids and electrolytes.

In very low birth weight infants, excessive or rapid administration of Sodium Chloride Injection, USP may result in increased serum osmolality and risk of intracerebral hemorrhage. Children (including neonates and older children) are at increased risk of developing hyponatremia as well as for developing hyponatremic encephalopathy.

🧓 Geriatric Use 89 words ▾

Geriatric Use Geriatric patients are at increased risk of developing electrolyte imbalances. Sodium Chloride Injection, USP is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Therefore, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.

Consider monitoring renal function in elderly patients.

🆘 Overdosage 91 words ▾

OVERDOSAGE Excessive administration of: 0.9% Sodium Chloride Injection, USP can cause hypernatremia. Sodium Chloride Injection, USP can cause fluid overload (which can lead to pulmonary and/or peripheral edema). See WARNINGS and ADVERSE REACTIONS .

When assessing an overdose, any additives in the solution must also be considered. The effects of an overdose may require immediate medical attention and treatment. Interventions include discontinuation of Sodium Chloride Injection, USP administration, dose reduction, and other measures as indicated for the specific clinical constellation (e.g., monitoring of fluid balance, electrolyte concentrations and acid base balance).

🧬 Clinical Pharmacology 29 words ▾

CLINICAL PHARMACOLOGY Sodium Chloride Injection, USP has value as a source of water and electrolytes. It is capable of inducing diuresis depending on the clinical condition of the patient.

📦 How Supplied / Storage and Handling 89 words ▾

HOW SUPPLIED The available sizes of 0.9% Sodium Chloride Injection, USP are shown below: NDC 0487-4301-05 - 50 mL, 64 units per shipper NDC 0487-4301-10 - 100 mL, 64 units per shipper NDC 0487-4301-25 - 250 mL, 35 units per shipper NDC 0487-4301-50 - 500 mL, 18 units per shipper Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat. It is recommended the product be stored at room temperature (25° C/ 77° F); brief exposure up to 40° C/ 104°F does not adversely affect the product.

📋 Description 177 words ▾

DESCRIPTION Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The nominal pH is 5.6 (4.5 to 7.0).

Composition, osmolarity, and ionic concentration are shown below: 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The plastic container is not made with PVC or DEHP.

The plastic container is made of polypropylene formulated and developed for parenteral drugs. The suitability of the plastic container has been established through biological evaluations, which have shown the container passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers.

These tests confirm the biological safety of the container closure system. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Refer to the Directions for Use of the container to properly identify the ports.

No vapor barrier is necessary.

💬 Information for Patients 72 words ▾

Patients with Severe Renal Impairment Administration of Sodium Chloride Injection, USP in patients with or at risk of severe renal impairment, may result in hypernatremia and/or fluid overload (see WARNINGS ). Avoid Sodium Chloride Injection, USP in patients with severe renal impairment or conditions that may cause sodium and/or potassium retention, fluid overload, or edema. If use cannot be avoided, monitor patients with severe renal impairment for development of these adverse reactions.

Glossary — plain-language definitions of medical terms used in this label:

adverse reaction: An unwanted or harmful effect that a medicine causes in the body.

Adverse Reactions: Unwanted or harmful effects that people experienced while taking a medicine, listed on its official label.

animal reproduction studies: Tests in pregnant animals used to check whether a medicine might harm a developing baby.

cirrhosis: Long-term scarring of the liver that gradually replaces healthy tissue and reduces how well the liver works.

clearance: How quickly the body removes a medicine from the blood, usually through the liver and kidneys.

Clinical Pharmacology: The label section explaining how a medicine works in the body and how the body processes it.

Contraindications: A list of situations or health conditions in which a medicine should not be used because the chance of harm is too high.

Dosage and Administration: The label section explaining how much of a medicine to use and how to take or give it.

dose reduction: Lowering the amount of a medicine, often to ease side effects or fit a person's needs.

Drug Interactions: The label section listing other medicines, foods, or substances that can change how a medicine works or raise the chance of side effects.

dyspnea: The medical word for shortness of breath, or the feeling that you cannot get enough air.

edema: Swelling caused by extra fluid trapped in the body's tissues.

electrolyte: A mineral in the blood and body fluids, such as sodium, potassium, or calcium, that carries a small electric charge and helps the body work.

embolism: A blockage of a blood vessel by a clot or other material that has traveled from elsewhere in the body.

encephalopathy: Any condition that affects how the brain works, causing confusion, memory problems, or changes in alertness.

erythema: Redness of the skin caused by increased blood flow, often from irritation or inflammation.

Excretion: How the body removes a medicine or its leftover pieces, mainly through the urine or stool.

fetal harm: Injury or damage to a developing baby while it is growing inside the womb.

flushing: Temporary redness and warmth of the skin, often on the face and neck, from widening of small blood vessels.

heart failure: A condition in which the heart cannot pump blood as well as it should, causing tiredness, breathlessness, and swelling.

hemodialysis: A treatment that uses a machine to filter waste and extra fluid from the blood when the kidneys cannot.

hemorrhage: Bleeding, especially heavy or uncontrolled bleeding, either inside the body or from an outside wound.

hypernatremia: A higher-than-normal level of sodium (salt) in the blood.

hypersensitivity: An overreaction of the body's defense system to a substance, causing symptoms such as rash, swelling, or trouble breathing.

hypertension: Blood pressure that stays higher than normal, commonly called high blood pressure.

hyponatremia: A lower-than-normal level of sodium (salt) in the blood.

hypotension: Blood pressure that is lower than normal, which can cause dizziness or fainting.

hypoxemia: A lower-than-normal level of oxygen in the blood.

Indications and Usage: The label section stating which medical conditions the FDA has officially approved the medicine to treat, prevent, or manage.

infusion: Slowly delivering fluid or medicine into a vein over a period of time, usually through a drip.

intravenous: Given directly into a vein through a needle or thin tube; often written as IV.

lethargy: A state of tiredness and sluggishness, often with slowed thinking or movement.

metabolic acidosis: A condition where too much acid builds up in the body's blood and fluids.

Metabolism: How the body chemically changes a medicine, usually in the liver, into other substances.

NDC: A unique number that identifies a specific medicine, its maker, strength, and package size.

Overdosage: The label section describing what can happen if too much of a medicine is taken and how it may be treated.

parenteral: Given by injection or drip into the body rather than swallowed by mouth.

peripheral edema: Swelling, usually in the feet, ankles, or legs, caused by extra fluid building up in the tissues.

pruritus: Itching of the skin.

pyrexia: A raised body temperature; a fever.

renal impairment: Reduced kidney function, meaning the kidneys do not filter waste and fluid from the blood as well as normal.

SIADH: Syndrome of inappropriate antidiuretic hormone: the body makes too much of a water-holding hormone, which lowers the level of sodium (salt) in the blood.

tachycardia: A faster-than-normal heart rate, usually over 100 beats per minute.

tremor: Shaking or trembling of part of the body, such as the hands, that a person cannot control.

urticaria: Raised, itchy welts on the skin, commonly called hives.

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗

🔗 Related NDC lookups

🧪 All Sodium Chloride NDCsSame ingredient 🏭 All Nephron labeler NDCsLabeler code 00487 🧾 J7040 billing & NDC crosswalkJ-code 📖 Read the Sodium Chloride drug informationUses, warnings & side effects

💊 Related drugs in this class

Other drugs that share this product’s specific therapeutic class — Sodium/Saline Preparations.

Sodium Chloride 0.9 % (Flush) 00019-1188-27 Sodium Chloride 0.45 % 00264-5804-00 Sodium Chloride 3 % 00264-7805-10 Sodium Chloride 5 % 00264-7806-10 Sodium Chloride 00409-1141-02 Bacteriostatic Sodium Chloride 00409-1966-05

Where does this data come from?

Other drugs sharing this product’s First Databank therapeutic class (HIC3). Each links to that NDC’s page in our directory.