Home › NDC Lookup › Ingredients › Dicloxacillin Sodium › 59651-0566-01
DICLOXACILLIN SODIUM 500 mg Capsule, 100-count — NDC 59651-0566-01 package photo

DICLOXACILLIN SODIUM 500 mg Capsule, 100-count

by Aurobindo Pharma Limited · 100 CAPSULE in 1 BOTTLE (59651-566-01)
NDC 59651-0566-01
🏷️ FDA NDC (as labeled) 59651-566-01 billing pads the product segment with a zero
Rx only Generic On market Non-controlled
🗂️ Data synced Jul 24, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →

🆔 Identity & classification

FDA NDC (as labeled) 59651-566-01
Product NDC 59651-566
11-digit billing NDC 59651056601
NCPDP billing unit EA — each (per item)
RxCUI 197595, 197596
UNII 4HZT2V9KX0
Application # ANDA216845
SPL Set ID 9074b5a6-850c-4144-9097-bb21073ee54d
Established class (EPC) Penicillin-class Antibacterial
Chemical class Penicillins
DEA schedule Non-controlled
Marketing category ANDA
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 2022-09-23
Route ORAL
Dosage form CAPSULE
Substance DICLOXACILLIN SODIUM
GPI-14 01300020100115
GCN Seq No 008984
GCN 39542
HICL code 003960
Ingredient (HICL) Dicloxacillin Sodium
HIC1 code W
Therapeutic class — broad (HIC1) Anti-Infecting Agents
HIC2 code W1
Therapeutic class — intermediate (HIC2) Antibiotics
HIC3 code W1A
Therapeutic class — specific (HIC3) Penicillin Antibiotics
AHFS code 08:12.16.12
AHFS class Penicillinase-Resistant Penicillins
FDB label name DICLOXACILLIN 500 MG CAPSULE
FDB brand name Dicloxacillin Sodium
Legend status F — Federal legend — prescription drug or device
TE code (Orange Book) AB · RLD · RS
Why two NDCs? The FDA registers this code as 59651-566-01 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 59651-0566-01. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

🏷️ RxNorm drug class

This medicine belongs to the Penicillin-class Antibacterial class.

Pharmacologic class Penicillin-class Antibacterial
Drug family (ATC) Beta-lactamase resistant penicillins
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

🏭 Manufacturer & labeler

LabelerAurobindo Pharma Limited
Application holderAUROBINDO PHARMA LTD
FDA applicationANDA216845 (ANDA)
Labeler code59651
First marketedSep 2022
Product typeHuman Prescription Drug
Portfolio1,456 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

🩺 Clinical

Label name DICLOXACILLIN 500 MG CAPSULE Ingredient Dicloxacillin Sodium
📖 What it is MedlinePlus · NLM

Dicloxacillin is used to treat infections caused by certain types of bacteria. Dicloxacillin is in a class of medications called penicillins. It works by killing bacteria. Antibiotics such as dicloxacillin will not work for colds, flu, or other viral infections. Using antibiotics when they are not needed increases your risk of getting an infection later that resists antibiotic treatment.

Read the full MedlinePlus article ↗
📗 Our plain-language guide HelloPharmacist
  • Dicloxacillin is used specifically for staph (staphylococcal) infections caused by bacteria that have developed resistance to regular penicillin. These resistant staph bacteria pro...
  • What kind of infections does dicloxacillin actually treat?
  • Yes, it does matter. Food slows down how quickly your body absorbs dicloxacillin, which means the medicine may not work as well. Try to take it on an empty stomach — about 30 to 60...
  • Please don't stop early, even if you feel much better. With staph infections, stopping too soon can leave behind bacteria that come back stronger or harder to treat. For severe inf...
📖 Read our full Dicloxacillin guide →
8
Nutrient depletion considerations

Dicloxacillin Sodium may be associated with lower levels of 8 nutrients — worth a chat with your pharmacist, not a cause for alarm.

An association is not a deficiency. Educational only — don't start or stop anything without professional guidance.
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

💊 What it looks like

Color Blue
ShapeCapsule
ImprintDCS;500
Size22 mm
ScoringNot scored
One label can cover several strengths, so colors may be combined — always confirm a loose pill against the dispensed prescription label or a pharmacist.
Where does this data come from?
Physical description (imprint, shape, color, scoring, coating) from this product’s FDA Structured Product Labeling (SPL), mirrored from DailyMed / openFDA.

🧪 Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • UNII H3R47K3TBD
    FD&C Blue No. 1 is a synthetic blue dye approved for use in foods and medicines. It serves as a colorant to give the medication its distinctive appearance and help with product identification.
  • UNII XM0M87F357
    A dark iron oxide compound that gives medicines their black or dark color. It's used as a colorant in tablets and capsules to help identify the product and make it visually distinctive.
  • UNII 2G86QN327L
    Gelatin is a protein derived from animal collagen, commonly used in medicines as a gelling agent and capsule material. It helps create soft or hard capsule shells that hold and release medication, and can also thicken liquid formulations.
  • UNII 70097M6I30
    Magnesium stearate is a salt made from magnesium and stearic acid, a fatty substance. It's used in tablets and capsules as a lubricant and glidant to help ingredients flow smoothly during manufacturing and prevent sticking.
  • UNII WZH3C48M4T
    Potassium hydroxide is a strong alkaline chemical used in medicines to adjust and maintain the pH level of liquid formulations, helping keep the product stable and the active ingredients effective.
  • UNII 46N107B71O
    Shellac is a natural resin secreted by the lac beetle. It's used as a coating on tablets and capsules to control how quickly the medicine dissolves and to improve appearance and stability.
  • UNII 368GB5141J
    A detergent and foaming agent derived from coconut or palm oil. In medications, it helps break down and mix oil and water-based ingredients, aids in tablet disintegration, and improves how the drug dissolves and spreads in the mouth or digestive system.
  • UNII 15FIX9V2JP
    Titanium dioxide is a bright white mineral powder commonly used as a colorant and opacifying agent. It makes pills and tablets white or lighter in color and helps make coatings non-transparent.

8 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMed — ingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

💲 Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer eaPer package
Retail pharmacies payNADAC · weekly $0.927 $92.74 / 100 capsules
Medicaid paysCMS SDUD · 12 mo $1.08 $107.86 / 100 capsules
Medicare drug plans payPart D · Q2 2026 $0.6362 $63.62 / 100 capsules
NADAC price history (per ea) — tap or hover for the price & month
Nov 2022 Dec 2025 Apr 2026 Sep 2026 $1.145 $0.927
▼ Down 9% over the last 14 months.
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

🔁 Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Dicloxacillin Sodium 500 mg 00093-3125-01 Teva 100 capsules $0.927 AB Availability likely —
Dicloxacillin Sodium 500 mgthis 59651-0566-01 Aurobindo 100 capsules $0.927 AB Availability likely —
Dicloxacillin Sodium 500 mg 43063-0473-20 PD-Rx 20 capsules — AB FDA listed —
Dicloxacillin Sodium 500 mg 63629-4256-01 Bryant 20 capsules — AB FDA listed —
Dicloxacillin Sodium 500 mg 76420-0183-20 Asclemed 20 capsules — AB FDA listed —
Dicloxacillin Sodium 500 mg 62135-0097-01 Chartwell 100 capsules — AB FDA listed —
Dicloxacillin Sodium 500 mg 67296-2307-04 Redpharm 40 capsules — AB FDA listed —
About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

⏳ Availability & generic status

🏛️
2022
On the market since
Sep 2022
📍
2026
Currently FDA-listed
4 years listed
🔓
·
Generic on the market
this product is a generic
✅This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

🗺️ Medicaid utilization & spend

📍 This exact package only: Medicaid data is reported per full 11-digit NDC — labeler, product and pack size — so every number here is for 59651-0566-01, not the drug overall. Other pack sizes report separately.
💊 Pharmacy benefit only: These are Medicaid outpatient pharmacy claims, billed by NDC. They exclude the medical benefit — clinic- or hospital-administered drugs billed under HCPCS J-codes — so drugs used mostly that way (e.g. Avastin, Lucentis, Keytruda) can look low or missing here. That’s expected, not an error.
📅 Q1 2025 – Q4 2025 · 4 quarters of data
ⓘ The newest quarter is usually incomplete when first published; states restate recent quarters in later CMS releases, so the latest figures typically revise upward. State coverage-policy changes can also shift quarter-to-quarter totals.
Prescriptions last 4 qtrs
16.4K
Units reimbursed last 4 qtrs
583.5K
Gross reimbursed last 4 qtrs
$629.3K
Avg / prescription
$38.37
Avg / unit
$1.0786
Latest quarter Q4 2025
4.4KRx
Medicaid pays / ea
$1.0786
gross reimbursed
vs
NADAC / ea
$0.9274
acquisition cost
=
Spread
+$0.1512
+16% vs cost
What Medicaid paid per ea (before rebates; includes the pharmacy’s dispensing fee) compared with NADAC — the average price pharmacies pay to buy the drug. A positive spread means Medicaid reimbursed more than the purchase price, before manufacturer rebates.
Fee-for-service vs managed care ⓘ
38% FFS 62% MCO
Fee-for-service · 6,163 Rx Managed care · 10,240 Rx
State Medicaid map
Alaska: 2,208 units · 301 per 100k residents AK Maine: 2,758 units · 198 per 100k residents ME Washington: 26,118 units · 334 per 100k residents WA Idaho: 5,663 units · 288 per 100k residents ID Montana: 3,834 units · 339 per 100k residents MT North Dakota: no data reported ND Minnesota: 17,418 units · 304 per 100k residents MN Wisconsin: 18,386 units · 311 per 100k residents WI Michigan: 10,318 units · 103 per 100k residents MI New York: 36,388 units · 186 per 100k residents NY Vermont: 2,814 units · 435 per 100k residents VT New Hampshire: 2,264 units · 161 per 100k residents NH Oregon: 18,690 units · 442 per 100k residents OR Nevada: 4,204 units · 132 per 100k residents NV Wyoming: 656 units · 112 per 100k residents WY South Dakota: no data reported SD Iowa: 6,217 units · 194 per 100k residents IA Illinois: 23,013 units · 183 per 100k residents IL Indiana: 9,644 units · 141 per 100k residents IN Ohio: 18,724 units · 159 per 100k residents OH Pennsylvania: 11,005 units · 84.9 per 100k residents PA New Jersey: 16,540 units · 178 per 100k residents NJ Massachusetts: 7,297 units · 104 per 100k residents MA California: 57,615 units · 148 per 100k residents CA Utah: 7,303 units · 214 per 100k residents UT Colorado: 21,872 units · 372 per 100k residents CO Nebraska: 6,533 units · 330 per 100k residents NE Missouri: 15,820 units · 255 per 100k residents MO Kentucky: 10,169 units · 225 per 100k residents KY West Virginia: 1,906 units · 108 per 100k residents WV Virginia: 8,296 units · 95.2 per 100k residents VA Maryland: 6,284 units · 102 per 100k residents MD Connecticut: 6,526 units · 180 per 100k residents CT Rhode Island: 652 units · 59.5 per 100k residents RI Arizona: 14,179 units · 191 per 100k residents AZ New Mexico: 8,391 units · 397 per 100k residents NM Kansas: 5,005 units · 170 per 100k residents KS Arkansas: 4,740 units · 155 per 100k residents AR Tennessee: 22,435 units · 315 per 100k residents TN North Carolina: 22,615 units · 209 per 100k residents NC South Carolina: 6,549 units · 122 per 100k residents SC Delaware: 1,076 units · 104 per 100k residents DE Oklahoma: 12,563 units · 310 per 100k residents OK Louisiana: 8,102 units · 177 per 100k residents LA Mississippi: 4,776 units · 162 per 100k residents MS Alabama: 6,894 units · 135 per 100k residents AL Georgia: 11,835 units · 107 per 100k residents GA D.C.: no data reported DC Hawaii: 552 units · 38.5 per 100k residents HI Texas: 51,273 units · 168 per 100k residents TX Florida: 15,333 units · 67.8 per 100k residents FL
Units reimbursed · per 100k residents
38.5442
gray = no data reported ⓘ
Colors are per 100,000 residents, so big states don’t automatically dominate. Tap or hover a state for its actual totals.
Tap or hover a state
…for its Medicaid breakdown
🏆 Top states by units · per 100k residents
1 Oregon 442 /100k
2 Vermont 435 /100k
3 New Mexico 397 /100k
4 Colorado 372 /100k
5 Montana 339 /100k
6 Washington 334 /100k
7 Nebraska 330 /100k
8 Tennessee 315 /100k
National units — by quarter
💵 About the dollar figures: “reimbursed” is what Medicaid paid pharmacies before confidential manufacturer rebates, so the program’s real net cost is lower than these numbers. Fee-for-service and managed-care claims are combined unless split above. Source: CMS State Drug Utilization Data; per-100k rates use 2023 Census population estimates.

📊 Medicare Part D spend CMS · PART D · 2026 (Q1)

Medicare Part D (outpatient prescription) spending for Dicloxacillin Sodium — the program that covers self-administered drugs. 2 manufacturers.
⚠️ Drug-level data: CMS publishes Part D spending by drug, not by NDC — these figures combine every manufacturer, strength and package size sold under the name Dicloxacillin Sodium. That’s a different level of aggregation than the Medicaid card above, which is specific to this exact 11-digit NDC (pack size included), so the two aren’t directly comparable.
Period
Total Part D spend
$250K
Claims incl. refills
5.5K
Beneficiaries
4.6K
Spend / beneficiary
$54.61
Spend / claim
$45.57
Trend by period
💵 About the dollar figures: spending is what Part D plans paid before confidential manufacturer rebates, so the program’s real net cost is lower. A blank patient count means fewer than 11 people — CMS hides counts that small to protect privacy. Source: CMS Medicare Quarterly Part D Spending by Drug (data.cms.gov), updated quarterly.

📦 Packaging — all sizes for this product

Package NDCDescription Marketing startStatus
59651-0566-01 You're viewing this 100 CAPSULE in 1 BOTTLE (59651-566-01) 2022-09-23 Active

📄 Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🎯 Indications and Usage 197 words ▾

INDICATIONS AND USAGE To reduce the development of drug-resistant bacteria and maintain the effectiveness of dicloxacillin sodium capsules and other antibacterial drugs, dicloxacillin sodium capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.

Dicloxacillin sodium capsules are indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organisms and their sensitivity to the drug (see CLINICAL PHARMACOLOGY – Susceptibility Testing ) . Dicloxacillin sodium capsules may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of laboratory test results.

The penicillinase-resistant penicillins should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant staphylococcus, therapy should not be continued with a penicillinase-resistant penicillin.

⏱️ Dosage and Administration ~1 min read ▾

DOSAGE AND ADMINISTRATION Concurrent administration of the penicillinase-resistant penicillins and probenecid increases and prolongs serum penicillin levels. Probenecid decreases the apparent volume of distribution and slows the rate of excretion by competitively inhibiting renal tubular secretion of penicillin. Penicillin-probenecid therapy is generally limited to those infections where very high serum levels of penicillin are necessary.

Oral preparations of the penicillinase-resistant penicillins should not be used as initial therapy in serious, life-threatening infections (see PRECAUTIONS - General ). Oral therapy with the penicillinase-resistant penicillins may be used to follow up the previous use of a parenteral agent as soon as the clinical condition warrants. RECOMMENDED DOSAGES FOR DICLOXACILLIN SODIUM IN MILD TO MODERATE AND SEVERE INFECTIONS 1.

Patients weighing less than 40 kg (88 lbs) DRUG ADULTS CHILDREN Mild to Moderate Severe Mild to Moderate Severe Dicloxacillin 125 mg every 6 hours 250 mg every 6 hours 12.5 mg/kg/day 1 in equally divided doses every 6 hours 25 mg/kg/day 1 in equally divided doses every 6 hours Dicloxacillin is best absorbed when taken on an empty stomach, and should be administered at least 1 hour before or 2 hours after meals. Dicloxacillin sodium capsules should be taken with at least 4 fluid ounces (120 mL) of water and should not be taken in the supine position or immediately before going to bed (see PRECAUTIONS ).

⛔ Contraindications 23 words ▾

CONTRAINDICATIONS Dicloxacillin sodium capsules are contraindicated in persons who have shown hypersensitivity to any of the penicillins or any component of the formulations.

⚠️ Warnings ~1 min read ▾

WARNINGS Serious and occasionally fatal hypersensitivity (anaphylactic shock with collapse) reactions have occurred in patients receiving penicillin. The incidence of anaphylactic shock in all penicillin-treated patients is between 0.015% and 0.04%. Anaphylactic shock resulting in death has occurred in approximately 0.002% of the patients treated.

Although anaphylaxis is more frequent following a parenteral administration, it has occurred in patients receiving oral penicillins. When penicillin therapy is indicated, it should be initiated only after a comprehensive patient drug and allergy history has been obtained. If an allergic reaction occurs, dicloxacillin should be discontinued and appropriate therapy instituted.

Individuals with a history of penicillin hypersensitivity may also experience allergic reactions when treated with a cephalosporin. Clostridium difficile associated diarrhea (CDAD) has been reported with use of nearly all antibacterial agents, including dicloxacillin sodium, and may range in severity from mild diarrhea to fatal colitis. Treatment with antibacterial agents alters the normal flora of the colon leading to overgrowth of C. difficile .

C. difficile produces toxins A and B which contribute to the development of CDAD. Hypertoxin producing strains of C. difficile cause increased morbidity and mortality, as these infections can be refractory to antimicrobial therapy and may require colectomy. CDAD must be considered in all patients who present with diarrhea following antibiotic use.

Careful medical history is necessary since CDAD has been reported to occur over two months after the administration of antibacterial agents. If CDAD is suspected or confirmed, ongoing antibiotic use not directed against C. difficile may need to be discontinued. Appropriate fluid and electrolyte management, protein supplementation, antibiotic treatment of C. difficile , and surgical evaluation should be instituted as clinically indicated.

🤒 Adverse Reactions ~2 min read ▾

ADVERSE REACTIONS Hypersensitive Reactions The reported incidence of allergic reactions to penicillin ranges from 0.7% to 10% (see WARNINGS ). Sensitization is usually the result of treatment, but some individuals have had immediate reactions to penicillin when first treated. In such cases, it is thought that the patients may have had prior exposure to the drug via trace amounts present in milk and vaccines.

Two types of allergic reactions to penicillin are noted clinically, immediate and delayed. Immediate reactions usually occur within 20 minutes of administration and range in severity from urticaria and pruritus to angioneurotic edema, laryngospasm, bronchospasm, hypotension, vascular collapse and death. Such immediate anaphylactic reactions are very rare (see WARNINGS ) and usually occur after parenteral therapy, but have occurred in patients receiving oral therapy.

Another type of immediate reaction, an accelerated reaction, may occur between 20 minutes and 48 hours after administration and may include urticaria, pruritus and fever. Although laryngeal edema, laryngospasm and hypotension occasionally occur, fatality is uncommon. Delayed allergic reactions to penicillin therapy usually occur after 48 hours and sometimes as late as two to four weeks after initiation of therapy.

Manifestations of this type of reaction include serum sicknesslike symptoms (i.e., fever, malaise, urticaria, myalgia, arthralgia, abdominal pain) and various skin rashes. Gastrointestinal Reactions Nausea, vomiting, diarrhea, stomatitis, black or hairy tongue and other symptoms of gastrointestinal irritation may occur, especially during oral penicillin therapy. Pseudomembranous colitis has been reported with the use of dicloxacillin.

Therefore, it is important to consider its diagnosis in patients who develop diarrhea in association with dicloxacillin use. Reports have been received during postmarketing surveillance of esophageal burning, esophagitis, and esophageal ulceration, particularly after ingestion of dicloxacillin capsules with an insufficient quantity of water and/or before going to bed (see PRECAUTIONS and DOSAGE AND ADMINISTRATION ). Nervous System Reactions Neurotoxic reactions similar to those observed with penicillin G (e.g., lethargy, confusion, twitching, multifocal myoclonus, localized or generalized epileptiform seizures) may occur with large intravenous doses of the penicillinase-resistant penicillins, especially with patients with renal insufficiency.

Renal Reactions Renal tubular damage and interstitial nephritis have been associated with the administration of methicillin sodium and, infrequently, with the administration of nafcillin and oxacillin. Manifestations of this reaction may include rash, fever, eosinophilia, hematuria, proteinuria and renal insufficiency. Methicillininduced nephropathy does not appear to be dose-related and is generally reversible upon prompt discontinuation of therapy.

Hematologic Reactions Eosinophilia, hemolytic anemia, agranulocytosis, neutropenia, leukopenia, granulocytopenia, thrombocytopenia, and bone marrow depression have been associated with the use of penicillinaseresistant penicillins. Hepatic Reactions Hepatotoxicity, characterized by fever, nausea and vomiting associated with abnormal liver function tests, mainly elevated AST (SGOT) levels, has been associated with the use of oxacillin and cloxacillin. Chloestatic hepatitis has been reported rarely.

Asymptomatic, transient increases in serum concentrations of alkaline phosphatase, AST (SGOT), and ALT (SGPT) have been reported.

🔄 Drug Interactions 151 words ▾

Drug Interactions Tetracycline, a bacteriostatic antibiotic, may antagonize the bactericidal effect of penicillin and concurrent use of these drugs should be avoided. Probenecid administered concomitantly with penicillins increases and prolongs serum penicillin levels (see DOSAGE AND ADMINISTRATION ). Penicillinase-resistant penicillins, like other penicillins, are physically and/or chemically incompatible with aminoglycosides and can inactivate the drugs in vitro.

In vitro mixing of penicillins and aminoglycosides should be avoided during concomitant therapy and the drugs should be administered separately. Penicillins can inactivate aminoglycosides in vitro in serum samples from patients receiving both drugs, which could produce falsely decreased results in serum aminoglycoside assays of the serum samples. Dicloxacillin may reduce the anticoagulant response to dicumarol and warfarin.

Careful monitoring of prothrombin times is suggested during concomitant therapy, and dosage of the anticoagulant should be adjusted as required. The mechanism of this possible interaction is unclear, but may be due to hepatic enzyme induction.

🤰 Pregnancy 93 words ▾

Pregnancy Reproduction studies performed in the mouse, rat and rabbit have revealed no evidence of impaired fertility or harm to the fetus due to the penicillinase-resistant penicillins. Human experience with the penicillins during pregnancy has not shown any positive evidence of adverse effects on the fetus. There are, however, no adequate or well-controlled studies in pregnant women showing conclusively that harmful effects of these drugs on the fetus can be excluded.

Because animal reproduction studies are not always predictive of human response, this drug should be used during pregnancy only if clearly needed.

🧒 Pediatric Use 80 words ▾

Pediatric Use Because of incompletely developed renal function in newborns, penicillinase-resistant penicillins (especially methicillin) may not be completely excreted, with abnormally high blood levels resulting. Frequent monitoring of blood levels is advisable in this group, with dosage adjustments when necessary. All newborns treated with penicillins should be monitored closely for clinical and laboratory evidence of toxic or adverse effects (see DOSAGE AND ADMINISTRATION ).

Experience in the neonatal period is limited. Therefore a dose for the newborn is not recommended.

🧓 Geriatric Use 84 words ▾

Geriatric Use Clinical studies of dicloxacillin sodium capsules did not include sufficient numbers of subjects aged 65 and over to determine whether they respond differently from younger subjects. Other reported clinical experience has not identified differences in responses between the elderly and younger patients. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy.

🧬 Clinical Pharmacology ~1 min read ▾

CLINICAL PHARMACOLOGY Microbiology Mechanism of Action Penicillinase-resistant penicillins exert a bactericidal action against penicillin-susceptible microorganisms during the state of active multiplication. All penicillins inhibit the biosynthesis of the bacterial cell wall. Antibacterial Activity Dicloxacillin sodium has been shown to be active against most isolates of the following microorganisms, both in vitro and in clinical infections as described in the INDICATIONS AND USAGE section.

Gram-positive Bacteria Staphylococcus spp. Susceptibility Testing For specific information regarding susceptibility test interpretive criteria and associated test methods and quality control standards recognized by FDA for this drug, please see: https://www.fda.gov/STIC. Pharmacokinetics Dicloxacillin sodium is resistant to destruction by acid.

Absorption of dicloxacillin sodium after oral administration is rapid but incomplete; peak blood levels are achieved in 1 to 1.5 hours. In one study, after ingestion of a single 500 mg oral dose, peak serum concentrations range from 10 to 17 mcg/mL for dicloxacillin. Oral absorption of dicloxacillin is delayed when the drugs are administered after meals.

Once absorbed, dicloxacillin sodium is 97.9 ± 0.6 percent bound to serum protein, mainly albumin. Dicloxacillin sodium vary in the extent to which they are distributed in the body fluids. With normal doses, insignificant concentrations are found in the cerebrospinal fluid and aqueous humor.

Dicloxacillin sodium is found in therapeutic concentrations in the pleural, bile and amniotic fluids. Dicloxacillin sodium is rapidly excreted, primarily as unchanged drug in the urine by glomerular filtration and active tubular secretion. The elimination half-life for dicloxacillin is about 0.7 hour.

Nonrenal elimination includes hepatic inactivation and excretion in bile. Dicloxacillin is not dialyzable. Only minimal amounts are removed by hemodialysis or peritoneal dialysis.

📦 How Supplied / Storage and Handling 192 words ▾

HOW SUPPLIED Dicloxacillin Sodium Capsules USP are available as follows: 250 mg: Each capsule contains dicloxacillin sodium USP monohydrate equivalent to 250 mg dicloxacillin (anhydrous), with blue opaque colored cap and body, hard gelatin capsule filled with white to off-white granular powder, imprinted with "DCS" on cap and “250” on body with black ink. They are supplied as follows: Bottles of 100 NDC 59651-565-01 500 mg: Each capsule contains dicloxacillin sodium USP monohydrate equivalent to 500 mg dicloxacillin (anhydrous), with blue opaque colored cap and body, hard gelatin capsule filled with white to off-white granular powder, imprinted with "DCS" on cap and “500” on body with black ink.

They are supplied as follows: Bottles of 100 NDC 59651-566-01 Store at 20° to 25°C (68° to 77°F); excursions permitted to 15° to 30°C (59° to 86°F) [See USP Controlled Room Temperature]. Dispense in a tight, light-resistant container as defined in the USP, with a child-resistant closure (as required). KEEP THIS AND ALL MEDICATIONS OUT OF THE REACH OF CHILDREN.

Distributed by: Aurobindo Pharma USA, Inc. 279 Princeton-Hightstown Road East Windsor, NJ 08520 Manufactured by: Aurobindo Pharma Limited Hyderabad-500 032, India Issued: August 2022

📋 Description 109 words ▾

DESCRIPTION Dicloxacillin sodium, USP is an antibacterial agent of the isoxazolyl penicillin series. It is a penicillinase resistant, acid resistant semisynthetic penicillin suitable for oral administration. It is monosodium (2 S ,5 R ,6 R )-6-[3-(2,6-dichlorophenyl)-5-methyl-4-isoxazolecarboxamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate monohydrate, and has following structural formula: C 19 H 16 Cl 2 N 3 NaO 5 S·H 2 O MW 510.32 Each capsule for oral administration contains dicloxacillin sodium USP monohydrate equivalent to 250 mg or 500 mg dicloxacillin (anhydrous).

The inactive ingredient is magnesium stearate. The capsule shells contain FD&C Blue 1, gelatin, sodium lauryl sulfate and titanium dioxide. The imprinting ink contains black iron oxide, potassium hydroxide and shellac. structure

💬 Information for Patients ~2 min read ▾

Information for the Patient Patients should be counselled that antibacterial drugs including dicloxacillin sodium capsules should only be used to treat bacterial infections. They do not treat viral infections (e.g., the common cold). When dicloxacillin sodium capsules are prescribed to treat a bacterial infection, patients should be told that although it is common to feel better early in the course of therapy, the medication should be taken exactly as directed.

Skipping doses or not completing the full course of therapy may (1) decrease the effectiveness of the immediate treatment and (2) increase the likelihood that bacteria will develop resistance and will not be treatable by dicloxacillin sodium capsules or other antibacterial drugs in the future. Diarrhea is a common problem caused by antibiotics which usually ends when the antibiotic is discontinued. Sometimes after starting treatment with antibiotics, patients can develop watery and bloody stools (with or without stomach cramps and fever) even as late as two or more months after having taken the last dose of the antibiotic.

If this occurs, patients should contact their physician as soon as possible. Patients receiving penicillins should be given the following information and instructions by the physician: Patients should be told that penicillin is an antibacterial agent which will work with the body’s natural defenses to control certain types of infections. They should be told that the drug should not be taken if they have had an allergic reaction to any form of penicillin previously, and to inform the physician of any allergies or previous allergic reactions to any drugs they may have had (see WARNINGS ).

Patients who have previously experienced an anaphylactic reaction to penicillin should be instructed to wear a medical identification tag or bracelet. Because most antibacterial drugs taken by mouth are best absorbed on an empty stomach, patients should be directed, unless circumstances warrant otherwise, to take penicillin one hour before meals or two hours after eating (see CLINICAL PHARMACOLOGY - Pharmacokinetics ). Patients should be told to take the entire course of therapy prescribed, even if fever and other symptoms have stopped (see PRECAUTIONS - General ).

If any of the following reactions occur, stop taking your prescription and notify the physician: shortness of breath, wheezing, skin rash, mouth irritation, black tongue, sore throat, nausea, vomiting, diarrhea, fever, swollen joints or any unusual bleeding or bruising (see ADVERSE REACTIONS ). Do not take any additional medications without physician approval, including nonprescription drugs such as antacids, laxatives or vitamins.

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.