Betamethasone valerate 1.2 mg/g Aerosol, Foam — NDC 62332-708-50 (Billing 62332-0708-50)
This is a package of Betamethasone valerate 1.2 mg/g Aerosol, Foam from Alembic Pharmaceuticals Inc., marketed since Aug 2024 and currently FDA-listed; retail pharmacies pay about $0.6316 per g (NADAC).
NDC database record
One package, one record: these facts belong to NDC 62332-708-50 alone.
- Record
- FDA NDC Directory package listing · Human prescription drug
- Code segments
- 62332 labeler · 708 product · 50 package
- Package marketed since
- Aug 22, 2024
- Sample package
- No — commercial package
- Listing certified through
- Dec 31, 2026
- Barcode (UPC)
- 0362332708505
- Medicaid fills, this package
- 13 prescriptions in the last four reported quarters
- FDA record last changed
- Jul 24, 2026
Identity & classification
Regulatory identifiers FDA, NLM and CMS codes for this package
Drug-database identifiers Medi-Span GPI and First Databank GCN / HICL / AHFS classification
- GSN (GCN sequence number): 026471
- GCN: 32052
- GPI-14 (Medi-Span): 90550020103920
- HICL (First Databank): 002883
- AHFS class code: 68:04.00.00
- RxCUI (RxNorm): 1244634
Where does this data come from?
- FDA openFDA NDC Directory · synced Oct 8, 2026
- FDA label on DailyMed · label index refreshed Oct 6, 2026
- RxNorm (NLM RxNav) · catalog refreshed Oct 1, 2026
- Medi-Span GPI (licensed)
- First Databank (licensed) · refreshed Oct 8, 2026
RxNorm drug class
This medicine belongs to the Corticosteroid class.
Where does this data come from?
- RxClass (NLM) · catalog refreshed Oct 1, 2026
Clinical
- It calms inflammation and itching from steroid-responsive skin conditions. The spray is specifically for mild to moderate plaque psoriasis in adults. The valerate foam is for the s...
- Use a thin film or a few drops, as your product directs, once or twice a day. The spray is shaken first and used twice daily. Wash your hands afterward and keep it out of your eyes...
- Not for long. Several products limit use to about 2 weeks and the spray to 4 weeks. Stop when your skin is under control, and call your doctor if you see no improvement within 2 we...
- Mild burning, stinging, itching or dryness where you apply it is the most common. Skin thinning can happen with ongoing use. Call me or your doctor if you notice vision changes or...
Patient education
Supplement & herbal interactions
Some supplements/herbs that may interact with Betamethasone valerate — tap one for details:
Betamethasone valerate may be associated with lower levels of 8 nutrients — worth a chat with your pharmacist, not a cause for alarm.
Where does this data come from?
- MedlinePlus (NLM) · refreshed Oct 1, 2026
- FDA label on DailyMed · label index refreshed Oct 6, 2026
Ask a licensed pharmacist directly — free, answered by our team.
Pricing
A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.
| Price system | Per g | Per package |
|---|---|---|
| Retail pharmacies payNADAC · weekly | $0.632 | $31.58 / 50 g |
| Medicaid paysCMS SDUD · 12 mo | $0.8499 | $42.50 / 50 g |
| Medicare drug plans payPart D · Q2 2026 | $1.13 | $56.36 / 50 g |
Where does this data come from?
- CMS NADAC weekly file · file of Oct 7, 2026
- CMS ASP pricing files · refreshed Sep 20, 2026
- CMS Medicaid State Drug Utilization Data · through Q1 2026
- CMS Part D plan pricing files · refreshed Sep 24, 2026
- VA National Acquisition Center price file
Packaging — all sizes for this product
| Package NDC | Description | Per unit | Per pack | Marketing start | Marketing end | Status |
|---|---|---|---|---|---|---|
| 62332-0708-31 62332-708-31 Main listing | 1 CAN in 1 CARTON / 100 g in 1 CAN | $0.6734 / g | $67.34 | 2024-08-22 | — | Active |
| 62332-0708-50 You're viewing this | 1 CAN in 1 CARTON / 50 g in 1 CAN | $0.6316 / g | $31.58 | 2024-08-22 | — | Active |
This pack has the lowest per-g cost of the 2 priced pack sizes ($0.6316 NADAC).
Pack size FAQ
What quantity is in this package?
What NDC number is used to bill for this package of Betamethasone valerate 1.2 mg/g Aerosol, Foam?
Prices are the latest CMS NADAC pharmacy acquisition cost per NDC; per-pack figures are per-unit × pack quantity, shown only when the pack is denominated in the same measure NADAC prices.
Therapeutic equivalents
| Product | Labeler | Pack | NADAC/unit | TE | Status | Price vs. this |
|---|---|---|---|---|---|---|
| Betamethasone Valerate 1.2 mg/g 45802-0053-01 | Padagis | 1 can | $0.632 | AB | Availability likely | — |
| Betamethasone Valerate 1.2 mg/g 51672-4188-03 | Sun | 1 can | $0.632 | AB | Availability likely | — |
| Betamethasone valerate 1.2 mg/gthis 62332-0708-50 | Alembic | 1 can | $0.632 | AB | Availability likely | — |
| Betamethasone Valerate 1.2 mg/g 70700-0141-19 | Xiromed, | 1 canister | $0.632 | AB | Availability likely | — |
| Betamethasone valerate 1.2 mg/g 46708-0708-31 | Alembic | 1 can | — | AB | FDA listed | — |
Where does this data come from?
- FDA openFDA NDC Directory · synced Oct 8, 2026
- FDA Orange Book · refreshed Oct 3, 2026
- CMS NADAC weekly file · file of Oct 7, 2026
Availability & generic status
This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.
Where does this data come from?
- FDA Orange Book · refreshed Oct 3, 2026
Inactive Ingredients / Excipients
Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.
🧪 Avoiding an ingredient? See Betamethasone inactive ingredients by manufacturer: every current product's list side by side, so you can ask your pharmacy for the version that does not list it.
💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.
-
UNII 3K9958V90M
A liquid solvent derived from fermentation or chemical synthesis. In medicines, alcohol dissolves active ingredients, helps preserve the product, and improves how the body absorbs certain drugs.
-
UNII XF417D3PSL
Anhydrous citric acid is a sour, crystalline powder derived from citric acid with water removed. In medicines, it acts as a buffer to control pH, adds tartness to improve taste, and helps tablets disintegrate.
-
UNII 936JST6JCN
Cetyl alcohol is a waxy, fatty substance derived from plant or animal sources. It acts as an emulsifier and thickener in medicines, helping blend oil and water components and giving products a smooth, creamy texture.
-
UNII CAL22UVI4M
A synthetic emulsifier derived from sorbitol and fatty acids. It helps mix oil and water-based ingredients together and improves the texture and stability of the medicine.
-
UNII EE90ONI6FF
Potassium citrate is a salt derived from citric acid and potassium. In medicines, it acts as a buffer to adjust and maintain the pH balance of the product, helping keep it stable and palatable.
-
UNII 6DC9Q167V3
Propylene glycol is a clear liquid derived from petroleum or vegetable sources. It acts as a solvent, humectant, and preservative in medicines, helping dissolve active ingredients and maintain product stability.
-
UNII 2KR89I4H1Y
Stearyl alcohol is a waxy, fatty substance derived from natural oils or made synthetically. It acts as an emulsifier and thickener in medicines, helping mix ingredients together and give the product the right texture.
-
UNII 059QF0KO0R
Water is a liquid solvent that dissolves and mixes ingredients together in liquid medicines, syrups, and injections. It helps distribute the active drug evenly throughout the product.
8 inactive ingredients listed in the exact product block matched to this NDC.
Where does this data come from?
ingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.- FDA label on DailyMed · label index refreshed Oct 6, 2026
- FDA openFDA NDC Directory · synced Oct 8, 2026
Inactive ingredient FAQ
Are inactive ingredients the same for every manufacturer?
Why might an inactive ingredient be missing?
Can inactive ingredients matter?
Manufacturer & labeler
More NDCs from Alembic Pharmaceuticals Inc. labeler code 62332
- Doxercalciferol 4 ug/2mL Injection, Solution NDC 62332-690-30
- Prazosin Hydrochloride 1 mg Capsule NDC 62332-691-31
- Prazosin Hydrochloride 2 mg Capsule NDC 62332-692-31
- Prazosin Hydrochloride 5 mg Capsule NDC 62332-693-31
- Brimonidine Tartrate and Timolol Maleate 2 mg/mL; 5 mg/mL Solution/ Drops NDC 62332-706-05
- Clobetasol Propionate .5 mg/g Aerosol, Foam NDC 62332-707-31
- Olopatadine Hydrochloride 1 mg/mL Solution/ Drops NDC 62332-709-05
- Olopatadine Hydrochloride 2 mg/mL Solution/ Drops NDC 62332-710-03
- METHOTREXATE 25 mg/mL Injection, Solution NDC 62332-711-05
- METHOTREXATE 25 mg/mL Injection, Solution NDC 62332-712-01
- Mesalamine .375 g Capsule, Extended Release NDC 62332-724-35
- Diltiazem Hydrochloride 120 mg Capsule, Extended Release NDC 62332-725-30
Where does this data come from?
- FDA openFDA NDC Directory · synced Oct 8, 2026
- Drugs@FDA
Full prescribing information FDA SPL
🎯 Indications and Usage ▾
INDICATIONS AND USAGE Betamethasone valerate foam, 0.12% is a medium potency topical corticosteroid indicated for relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses of the scalp.
⏱️ Dosage and Administration ▾
DOSAGE AND ADMINISTRATION Note: For proper dispensing of foam, can must be inverted. For application to the scalp invert can and dispense a small amount of betamethasone valerate foam, 0.12% onto a saucer or other cool surface. Do not dispense directly onto hands as foam will begin to melt immediately upon contact with warm skin.
Pick up small amounts of foam with fingers and gently massage into affected area until foam disappears. Repeat until entire affected scalp area is treated. Apply twice daily, once in the morning and once at night.
As with other corticosteroids, therapy should be discontinued when control is achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary. Betamethasone valerate foam, 0.12% should not be used with occlusive dressings unless directed by a physician.
⛔ Contraindications ▾
CONTRAINDICATIONS Betamethasone valerate foam, 0.12% is contraindicated in patients who are hypersensitive to betamethasone valerate, to other corticosteroids, or to any ingredient in this preparation.
🤒 Adverse Reactions ▾
ADVERSE REACTIONS The most frequent adverse event was burning/itching/stinging at the application site; the incidence and severity of this event were as follows: Incidence and severity of burning/itching/stinging Product Total incidence Maximum severity Mild Moderate Severe Betamethasone Valerate Foam n = 63 34 (54%) 28 (44%) 5 (8%) 1 (2%) Betamethasone Valerate Lotion n = 63 33 (52%) 26 (41%) 6 (10%) 1 (2%) Placebo Foam n = 32 24 (75%) 13 (41%) 7 (22%) 4 (12%) Placebo Lotion n=30 20 (67%) 12 (40%) 5 (17%) 3 (10%) Other adverse events which were considered to be possibly, probably, or definitely related to betamethasone valerate foam occurred in 1 patient each; these were paresthesia, pruritus, acne, alopecia, and conjunctivitis.
The following additional local adverse reactions have been reported with topical corticosteroids, and they may occur more frequently with the use of occlusive dressings. These reactions are listed in an approximately decreasing order of occurrence: irritation; dryness; folliculitis; acneiform eruptions; hypopigmentation; perioral dermatitis; allergic contact dermatitis; secondary infection; skin atrophy; striae; and miliaria. Systemic absorption of topical corticosteroids has produced reversible hypothalamic-pituitary-adrenal (HPA) axis suppression, manifestations of Cushing's syndrome, hyperglycemia, and glucosuria in some patients.
🆘 Overdosage ▾
OVERDOSAGE Topically applied betamethasone valerate foam, 0.12% can be absorbed in sufficient amounts to produce systemic effects. (See PRECAUTIONS ).
🧬 Clinical Pharmacology ▾
CLINICAL PHARMACOLOGY Like other topical corticosteroids, betamethasone valerate foam has anti-inflammatory, antipruritic, and vasoconstrictive properties. The mechanism of the anti-inflammatory activity of the topical steroids, in general, is unclear. However, corticosteroids are thought to act by the induction of phospholipase A 2 inhibitory proteins, collectively called lipocortins.
It is postulated that these proteins control the biosynthesis of potent mediators of inflammation such as prostaglandins and leukotrienes by inhibiting the release of their common precursor arachidonic acid. Arachidonic acid is released from membrane phospholipids by phospholipase A 2 . Pharmacokinetics: Topical corticosteroids can be absorbed from intact healthy skin.
The extent of percutaneous absorption of topical corticosteroids is determined by many factors, including the vehicle and the integrity of the epidermal barrier. Occlusion, inflammation and/or other disease processes in the skin may also increase percutaneous absorption. The use of pharmacodynamic endpoints for assessing the systemic exposure of topical corticosteroids is necessary due to the fact that circulating levels are well below the level of detection.
Once absorbed through the skin, topical corticosteroids are handled through pharmacokinetic pathways similar to systemically administered corticosteroids. They are metabolized, primarily in the liver, and are then excreted by the kidneys. In addition, some corticosteroids and their metabolites are also excreted in the bile.
📦 How Supplied / Storage and Handling ▾
HOW SUPPLIED Betamethasone valerate foam, 0.12% contains 1.2 mg of betamethasone valerate, USP per gram. It is white to off white foam available as follows: NDC 62332-708-50 carton containing one 50 g aluminum can NDC 62332-708-31 carton containing one 100 g aluminum can Store at 20 ° to 25 ° C (68 ° to 77 ° F); excursions permitted between 15 ° to 30 ° C (59 ° to 86 ° F) [see USP Controlled Room Temperature]. WARNING FLAMMABLE.
AVOID FIRE, FLAME OR SMOKING DURING AND IMMEDIATELY FOLLOWING APPLICATION. Keep this and all medication out of the reach of children. Contents under pressure.
Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120°F (49°C). Manufactured for: Alembic Pharmaceuticals, Inc.
Bedminster, NJ 07921, USA Manufactured by: Alembic Pharmaceuticals Limited (Derma Division), Karakhadi, Vadodara 391450, India. Mfg. License No.: G/25/2216 PATIENT INFORMATION Betamethasone Valerate (bay'' ta meth' a sone val' er ate) Foam, 0.12% About Betamethasone Valerate Foam, 0.12% Your doctor has prescribed betamethasone valerate foam, 0.12%, for the relief of corticosteroid-responsive skin conditions of the scalp.
Betamethasone valerate foam, 0.12% works because its active ingredient is betamethasone valerate, 0.12%. Betamethasone belongs to a group of medicines known as topical corticosteroids. These agents are used to reduce the inflammation, redness, swelling, itching, and tenderness associated with dermatologic conditions.
Other ingredients in betamethasone valerate foam, 0.12% include cetyl alcohol, citric acid, ethanol, polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol. The foam is dispensed from an aluminum can that is pressurized by a hydrocarbon propellant (propane and butane). If you answer YES to one or more of the following questions, tell your doctor (or pharmacist) before using this medicine, so you can get advice about what to do.
Are you allergic to any of the ingredients contained in betamethasone valerate foam, 0.12%? Are you pregnant? Planning on becoming pregnant while using betamethasone valerate foam, 0.12%?
Or are you breastfeeding? Do you think you have an infection on your scalp? How to apply betamethasone valerate foam, 0.12% Turn the can upside down and dispense a small amount of betamethasone valerate foam, 0.12% onto a clean saucer or other cool, clean surface.
Do not dispense directly onto hands, as foam will begin to melt immediately upon contact with warm skin. Pick up small amounts of foam with fingers and gently massage into affected area until foam disappears. Repeat until entire affected scalp area is treated.
Apply twice daily, once in the morning and once at night. Use sparingly—only enough to cover the affected areas. Gently massage the foam in until it is absorbed and allow the areas to dry naturally.
When applying to the scalp, move the hair away so that the foam can be applied directly to each affected area. Wash your hands immediately after applying betamethasone valerate foam, 0.12%, and discard any unused dispensed medication. Do not wash or rinse the treated areas immediately after applying betamethasone valerate foam, 0.12%.
Do not use this medication for any condition other than the one for which it was prescribed. Betamethasone valerate foam, 0.12% is for external use only. Keep the foam away from your eyes, as it will sting.
If the foam gets into your eyes, rinse well with cold water. If the stinging continues, contact your doctor immediately. WHAT YOU SHOULD KNOW ABOUT BETAMETHASONE VALERATE FOAM, 0.12%: What to do if you miss an application If you forget to apply betamethasone valerate foam, 0.12% at the scheduled time, use it as soon as you remember, and then go back to your regular schedule.
If you remember at or about the time of your next daily application, apply that dose and continue with your normal application schedule. If you miss several doses, tell your doctor at your next appointment.… [Excerpted — this section continues on DailyMed.]
📋 Description ▾
DESCRIPTION Betamethasone valerate foam, 0.12% contains betamethasone valerate, a synthetic corticosteroid, for topical dermatologic use. The corticosteroids constitute a class of primarily synthetic steroids used topically as anti-inflammatory agents. Betamethasone valerate is 9α-fluoro-11ß,17,21-trihydroxy-16ß-methylpregna-1,4-diene-3,20-dione-17-valerate, with the empirical formula C 27 H 37 FO 6 , a molecular weight of 476.58.
The following is the chemical structure: Betamethasone valerate Betamethasone valerate, USP is a white to almost-white, crystalline powder, and is practically insoluble in water, freely soluble in acetone and in chloroform, soluble in alcohol, and slightly soluble in benzene and in ether. Betamethasone valerate foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant.
Image
⚠️ Precautions ▾
PRECAUTIONS General: Systemic absorption of topical corticosteroids has caused reversible hypothalamic-pituitary-adrenal (HPA) axis suppression with the potential for glucocorticosteroid insufficiency after withdrawal of treatment. Manifestations of Cushing's syndrome, hyperglycemia, and glucosuria can also be produced in some patients by systemic absorption of topical corticosteroids while on treatment. Conditions which augment systemic absorption include the application of the more potent steroids, use over large surface areas, prolonged use, and the addition of occlusive dressings.
Therefore, patients applying a topical steroid to a large surface area or to areas under occlusion should be evaluated periodically for evidence of HPA axis suppression. If HPA axis suppression is noted, an attempt should be made to withdraw the drug, to reduce the frequency of application, or to substitute a less potent steroid. Recovery of HPA axis function is generally prompt upon discontinuation of topical corticosteroids.
Infrequently, signs and symptoms of glucocorticosteroid insufficiency may occur requiring supplemental systemic corticosteroids. For information on systemic supplementation, see prescribing information for those products. Pediatric patients may be more susceptible to systemic toxicity from equivalent doses due to their larger skin surface to body mass ratios.
(See PRECAUTIONS-Pediatric Use . ) If irritation develops, betamethasone valerate foam should be discontinued and appropriate therapy instituted. Allergic contact dermatitis with corticosteroids is usually diagnosed by observing a failure to heal rather than noting a clinical exacerbation, as with most topical products not containing corticosteroids. Such an observation should be corroborated with appropriate diagnostic patch testing.
In the presence of dermatological infections, the use of an appropriate antifungal or antibacterial agent should be instituted. If a favorable response does not occur promptly, use of betamethasone valerate foam, 0.12% should be discontinued until the infection has been adequately controlled. Information for Patients: Patients using topical corticosteroids should receive the following information and instructions: This medication is to be used as directed by the physician.
It is for external use only. Avoid contact with the eyes. This medication should not be used for any disorder other than that for which it was prescribed.
The treated scalp area should not be bandaged or otherwise covered or wrapped so as to be occlusive unless directed by the physician. Patients should report to their physician any signs of local adverse reactions. As with other corticosteroids, therapy should be discontinued when control is achieved.
If no improvement is seen within 2 weeks, contact the physician. Laboratory Tests: The following tests may be helpful in evaluating patients for HPA axis suppression: ACTH stimulation test A.M. plasma cortisol test Urinary free cortisol test Carcinogenesis, Mutagenesis, and Impairment of Fertility: Long-term animal studies have not been performed to evaluate the carcinogenic potential or the effect on fertility of betamethasone valerate. Betamethasone was genotoxic in the in vitro human peripheral blood lymphocyte chromosome aberration assay with metabolic activation and in the in vivo mouse bone marrow micronucleus assay.
Pregnancy: Corticosteroids have been shown to be teratogenic in laboratory animals when administered systemically at relatively low dosage levels. Some corticosteroids have been shown to be teratogenic after dermal application in laboratory animals. There are no adequate and well-controlled studies in pregnant women.
Therefore, betamethasone valerate foam should be used during pregnancy only if the potential benefit justifies the potential risk to the fetus. Drugs of this class should not be used extensively on pregnant patients, in large amounts, or for prolonged periods of time. Nursing Mothers: Syste… [Excerpted — this section continues on DailyMed.]
🔬 Clinical Studies ▾
CLINICAL STUDIES The safety and efficacy of betamethasone valerate foam has been demonstrated in a four-week trial. An adequate and well-controlled clinical trial was conducted in 190 patients with moderate to severe scalp psoriasis. Patients were treated twice daily for four weeks with betamethasone valerate foam, Placebo foam, a commercially available betamethasone valerate lotion 0.12% (formerly expressed as 0.1% betamethasone), or Placebo lotion.
At four weeks of treatment, study results of 159 patients demonstrated that the efficacy of betamethasone valerate foam in treating scalp psoriasis is superior to that of Placebo foam, and is comparable to that of a currently marketed BMV lotion (see Table below). Subjects with Target Lesion Parameter Clear at Endpoint Betamethasone Valerate Foam n (%) BMV Lotion n (%) Placebo Foam n (%) Scaling 30 (47%) 22 (35%) 2 (6%) Erythema 26 (41%) 16 (25%) 2 (6%) Plaque Thickness 42 (66%) 25 (40%) 5 (16%) Investigator's Global: Subjects Completely Clear or Almost Clear at Endpoint 43 (67%) 29 (46%) 6 (19%)
📄 Package Label / Principal Display Panel ▾
PRINCIPAL DISPLAY PANEL NDC 62332-708-50 Betamethasone Valerate Foam, 0.12% Rx only 50 grams FOR DERMATOLOGIC USE ONLY. NOT FOR OPHTHALMIC USE. Invert can and then press firmly to dispense.
Description: Betamethasone Valerate Foam, 0.12%, contains 1.2 mg betamethasone valerate, USP, per gram in a thermolabile hydroethanolic foam vehicle consisting of cetyl alcohol, citric acid, ethanol (60.4%), polysorbate 60, potassium citrate, propylene glycol, purified water, and stearyl alcohol pressurized with a hydrocarbon (propane/butane) propellant. Usual Dosage: See accompanying prescribing information. For application to the scalp, invert can and dispense a small amount of betamethasone valerate foam, 0.12% onto a saucer or other cool surface.
(Do not dispense directly onto hands, as foam will begin to melt immediately upon contact with warm skin.) Pick up small amounts of foam with fingers and gently massage into affected area until foam disappears. Repeat until entire affected scalp area is treated. Apply twice daily, once in the morning and once at night.
WARNING: FLAMMABLE. AVOID FIRE, FLAME, OR SMOKING DURING AND IMMEDIATELY FOLLOWING APPLICATION. Keep away from eyes or other mucous membranes.
Keep this and all medication out of the reach of children. Contents under pressure. Do not puncture or incinerate container.
Do not expose to heat or store at temperatures above 120°F (49°C). Store at 20° to 25°C (68° to 77°F); excursions permitted between 15° to 30°C (59° to 86°F) [see USP Controlled Room Temperature]. CFC FREE Manufactured for: Alembic Pharmaceuticals, Inc.
Bedminster, NJ 07921, USA Manufactured by: Alembic Pharmaceuticals Limited (Derma Division), Karakhadi, Vadodara 391450, India. Mfg. License No.: G/25/2216 Questions: Call at 1-866-210-9797.
Side effects should be reported to this number. NDC 62332-708-50 Betamethasone Valerate Foam, 0.12% Rx only 50 grams FOR DERMATOLOGIC USE ONLY. NOT FOR OPHTHALMIC USE.
50 g can 50 g carton Image