Home › NDC Lookup › Ingredients › Sodium Chloride › 65219-0506-30
Sodium chloride .9 g/100mL Injection, Solution — NDC 65219-0506-30 package photo
Label image from the product's FDA listing (DailyMed) — may show a different pack size or an older label revision.

Sodium chloride .9 g/100mL Injection, Solution — NDC 65219-506-30 (Billing 65219-0506-30)

by Fresenius Kabi USA, LLC · 4 BAG in 1 CASE / 3000 mL in 1 BAG

This is a package of Sodium chloride .9 g/100mL Injection, Solution from Fresenius Kabi USA, LLC, marketed since Mar 2025 and currently FDA-listed. It is this product's only package size.

NDC 65219-0506-30
🏷️ FDA NDC (as labeled) 65219-506-30 billing pads the product segment with a zero
Rx only Generic On market Non-controlled ⇄ Compare with another NDC
🗂️ FDA directory synced Oct 1, 2026 · this listing last changed Jul 24, 2026 · sources: openFDA · FDA label (DailyMed) · FDA Orange & Purple Book · First Databank · CMS NADAC, ASP, Medicare & Medicaid · RxNorm
📋 All sources & update times →
⚠️
Other active recalls for Sodium Chloride (different manufacturers) — 6 · tap to view
These affect other manufacturers’ products for the same ingredient — not necessarily the exact NDC on this page.
Class I · Aug 17, 2026 — Presence of particulate matter: Particulates identified as fiberglass (Baxter Healthcare Corporation) · FDA recall D-0849-2026
Class II · Apr 2, 2026 — Lack of Assurance of Sterility (Huons Co., Ltd.) · FDA recall D-0531-2026
Class II · Mar 11, 2026 — Lack of Assurance of Sterility (Fresenius Kabi USA, LLC) · FDA recall D-0427-2026
Class II · Mar 11, 2026 — Lack of Assurance of Sterility (Fresenius Kabi USA, LLC) · FDA recall D-0424-2026
Class II · Mar 11, 2026 — Lack of Assurance of Sterility (Fresenius Kabi USA, LLC) · FDA recall D-0432-2026
Class II · Mar 11, 2026 — Lack of Assurance of Sterility (Fresenius Kabi USA, LLC) · FDA recall D-0426-2026
Each entry is an official FDA enforcement report — look up any recall number in the FDA recall database ↗

Identity & classification

Regulatory identifiers FDA, NLM and CMS codes for this package

FDA NDC (as labeled) 65219-506-30
Product NDC 65219-506
11-digit billing NDC 65219050630
NCPDP billing unit ML — per mL (volume)
RxCUI 486515
UNII 451W47IQ8X
Application # ANDA213688
SPL Set ID ce0c8c6f-734a-400f-9b60-a3b1e263f25f
Established class (EPC) Osmotic Laxative
Mechanism of action Osmotic Activity
Physiologic effect Increased Large Intestinal Motility; Inhibition Large Intestine Fluid/Electrolyte Absorption
DEA schedule Non-controlled
Marketing category ANDA
Marketing status On market
FDA listing status Listed (active directory)
Marketing start 2025-03-03
Route IRRIGATION
Dosage form INJECTION, SOLUTION
Substance SODIUM CHLORIDE
TE code (Orange Book) AT · RLD · RS

Drug-database identifiers Medi-Span GPI and First Databank GCN / HICL / AHFS classification

GPI-14 56700060002010
GCN Seq No 009827
GCN 45360
HICL code 004285
Ingredient (HICL) Sodium Chloride Irrig Solution
HIC1 code W
Therapeutic class — broad (HIC1) Anti-Infecting Agents
HIC2 code W8
Therapeutic class — intermediate (HIC2) Antiseptics
HIC3 code W8F
Therapeutic class — specific (HIC3) Irrigants
AHFS code 40:36.00.00
AHFS class Irrigating Solutions
FDB label name SODIUM CHLORIDE 0.9% IRRIG.
FDB brand name Sodium Chloride
Legend status F — Federal legend — prescription drug or device
Quick answers
  • GSN (GCN sequence number): 009827
  • GCN: 45360
  • GPI-14 (Medi-Span): 56700060002010
  • HICL (First Databank): 004285
  • AHFS class code: 40:36.00.00
  • RxCUI (RxNorm): 486515
Why two NDCs? The FDA registers this code as 65219-506-30 — a 5-3-2 layout, and that's what's printed on the package and shown on DailyMed. For insurance claims, every NDC is standardized to a uniform 11-digit 5-4-2 format by adding a zero to the product segment → 65219-0506-30. Same drug, same package — only the format differs.
Where does this data come from?
Identifiers from the FDA openFDA NDC Directory and Structured Product Labeling; RxCUI from RxNorm (NLM); GPI from Medi-Span; GCN / HIC / AHFS / legend from First Databank.

RxNorm drug class

This medicine belongs to the Sodium class.

Drug family (ATC) Sodium, Salt solutions, Electrolyte solutions
Where does this data come from?
Therapeutic classes from RxNorm RxClass (U.S. National Library of Medicine) — Established Pharmacologic Class (FDA), ATC drug family (WHO) and mechanism of action, matched by this product’s RxCUI.

Clinical

Label name SODIUM CHLORIDE 0.9% IRRIG. Ingredient Sodium Chloride Irrig Solution
📗 Our plain-language guide HelloPharmacist
  • It depends on the product. IV forms replace fluid and salt, while injection diluents dissolve other drugs. Other forms are used for rinsing, nasal congestion and nasal care, or to...
  • Follow the directions on your product. Many are used as often as needed by adults and children 4 and over. Do not share the bottle, because that can spread infection.
  • Some people get fever, irritation or infection at the IV site, or too much fluid in the body. Tell your nurse right away if the IV site hurts or looks red.
  • What side effects should I expect with IV sodium chloride?
📖 Read our full Sodium Chloride guide →
Where does this data come from?
Plain-language summary from MedlinePlus (U.S. National Library of Medicine); supplement & herbal interactions and nutrient depletion data from the Natural Medicines database; our full guide is HelloPharmacist editorial content.

Pricing

A drug doesn't have one price. Each row is a different public payment system, and none is what you'd pay at the counter — that depends on your insurance. The ⓘ on each row explains what it measures.

Price systemPer mLPer package
Retail pharmacies payNADAC · weekly Not in the retail survey — common for institutional, discontinued, or low-volume packs.
Medicaid paysCMS SDUD · 12 mo No recent Medicaid claims on file for this NDC — rare and low-volume NDCs are suppressed in the public data.
Medicare drug plans payPart D · Q2 2026 $0.0100 $120.00 / 12000 ml
Medicare Part B allowsASP · A4217 No ASP payment limit on file for A4217 this quarter.
Where does this data come from?
NADAC (National Average Drug Acquisition Cost) is the CMS weekly pharmacy-acquisition-cost survey — what pharmacies pay. ASP (Average Sales Price) is the CMS Medicare Part B drug-payment file, published quarterly. Medicaid pays is computed by us from CMS State Drug Utilization Data (total reimbursed ÷ units, trailing 12 months) — gross of rebates and inclusive of dispensing fees, so it reflects what Medicaid paid, not an acquisition cost. Medicare drug plans pay is the median negotiated point-of-sale unit cost across plans listing this NDC in the CMS quarterly Prescription Drug Plan pricing files, before rebates. The VA pays is the federal contract price (FSS, and the statutory Big 4 ceiling where listed) from the VA National Acquisition Center pharmaceutical price file. All are free public government data; each measures a different payer, so the figures are not directly comparable.

Billing & reimbursement

FDA NDC (as labeled)65219-506-30
11-digit billing NDC65219-0506-30
Format5-3-2 as registered → padded to 5-4-2 for billing (zero added to the product segment)
HCPCS J-codeA4217
DescriptorSTERILE WATER/SALINE, 500 ML
Billing units / pkg0 units
How the units are derivedThis package is 3000 ML; the HCPCS unit is 500 ML, so one package = 0 billing units.
Crosswalk sourcePDAC NDC-HCPCS crosswalk (DME MAC / DMEPOS)
Where does this data come from?
The HCPCS J-code crosswalk comes from the CMS ASP NDC-HCPCS crosswalk and the DMEPDAC (DME MAC) NDC-HCPCS crosswalk — free public CMS data. Billing units are derived from the code’s descriptor and the package amount.

Packaging — all sizes for this product

Package NDCDescription Marketing startMarketing endStatus
65219-0506-30 You're viewing this Main listing 4 BAG in 1 CASE / 3000 mL in 1 BAG 2025-03-03 — Active

Therapeutic equivalents

ProductLabelerPackNADAC/unitTEStatusPrice vs. this
Sodium Chloride .9 g/100mL 00264-2201-00 B. 1000 ml — AT FDA listed —
Sodium Chloride for Irrigation .9 g/100mL 00264-7388-50 B. 2000 ml — AT FDA listed —
Sodium Chloride 900 mg/100mL 00338-0047-44 Baxter 1000 ml — AT FDA listed —
Sodium Chloride 900 mg/100mL 00338-0048-02 Baxter 24 bottles — AT FDA listed —
Sodium Chloride 900 mg/100mL 00338-0050-47 Baxter 3000 ml — AT FDA listed —
Sodium Chloride 9 g/1000mL 00338-0051-44 Baxter 1000 ml — — FDA listed —
Sodium Chloride 900 mg/100mL 00338-0110-04 Baxter 3000 ml — — FDA listed —
Sodium Chloride 900 mg/100mL 00338-9834-04 Baxter 3000 ml — — FDA listed —
Sodium Chloride 900 mg/100mL 00990-7972-05 ICU 1000 ml — AT FDA listed —
Sodium chloride .9 g/100mL 17271-0800-07 Becton 1000 ml — AT FDA listed —
Sodium chloride .9 g/100mL 65219-0502-10 Fresenius 1000 ml — AT FDA listed —
Sodium chloride .9 g/100mL 65219-0504-20 Fresenius 2000 ml — AT FDA listed —
Sodium chloride .9 g/100mLthis 65219-0506-30 Fresenius 3000 ml — AT FDA listed —
About this product: this is a generic version of the medicine. FDA equivalence ratings are shown when available, and other versions are listed above, least expensive first.
Where does this data come from?
Equivalents are other NDCs of the same ingredient, form and route from the openFDA NDC Directory, ranked least-expensive-first by NADAC. Therapeutic-equivalence (AB) ratings come from the FDA Orange Book; biologics use the FDA Purple Book for biosimilar & interchangeable status.

Availability & generic status

🏛️
2025
On the market since
Mar 2025
📍
2026
Currently FDA-listed
1 year listed
🔓
·
Generic on the market
this product is a generic
✅This is a generic drug

This product is an FDA-approved generic. Other versions of the same drug are listed under Therapeutic equivalents, least expensive first.

Where does this data come from?
Patents and exclusivity from the FDA Orange Book (small-molecule drugs), refreshed from public FDA data. Generic launch timing is an estimate, not a guarantee.

Inactive Ingredients / Excipients

Inactive ingredients, also called excipients, are components of the drug product other than the active ingredient. They may include fillers, dyes, coatings, preservatives, flavors, or other formulation ingredients.

💡 Tap an ingredient (hover on desktop) to see what it is and why it’s used.

  • UNII QTT17582CB
    A strong acid used to adjust and maintain the proper pH level in liquid medicines, ensuring stability and preventing breakdown of active ingredients.
  • UNII 059QF0KO0R
    Water is a liquid solvent that dissolves and mixes ingredients together in liquid medicines, syrups, and injections. It helps distribute the active drug evenly throughout the product.

2 inactive ingredients listed in the exact product block matched to this NDC.

Where does this data come from?
Data sourced from official FDA Structured Product Labeling (SPL) via DailyMed — ingredient classCode="IACT" elements from the exact product block matched by this NDC. Label-section narrative from DailyMed / the openFDA label index is shown separately when available.

Inactive ingredient FAQ

Are inactive ingredients the same for every manufacturer?
No. Inactive ingredients can differ by manufacturer, dosage form, strength, and package / product version.
Why might an inactive ingredient be missing?
Some SPLs do not provide a complete structured inactive-ingredient list, and older or unusual labels may only include the information in narrative text.
Can inactive ingredients matter?
Yes. They can matter for allergies, intolerances, dyes, gluten / lactose concerns, preservatives, and formulation differences — but confirm with a pharmacist or the manufacturer when it’s clinically important.

Manufacturer & labeler

LabelerFresenius Kabi USA, LLC
Application holderFRESENIUS KABI USA LLC
FDA applicationANDA213688 (ANDA)
Labeler code65219
First marketedMar 2025
Product typeHuman Prescription Drug
Portfolio554 products on file
The labeler markets the product; the application holder owns the FDA approval. They’re often the same company but can differ (e.g. a repackager or an authorized generic). A mailing address / phone appears here when the manufacturer includes it in the product’s FDA label (not all do).
Where does this data come from?
Labeler, application holder and registered establishment from the FDA openFDA NDC Directory and Drugs@FDA; address/contact from the product’s FDA label.

Full prescribing information FDA SPL

The complete FDA label for this product — the official prescribing information, verbatim, section by section. Jump with a chip, search within the label, or expand everything.
🎯 Indications and Usage 27 words ▾

INDICATIONS AND USAGE 0.9% Sodium Chloride Irrigation is indicated for all general irrigation, washing, rinsing and dilution purposes which permit use of a sterile, nonpyrogenic electrolyte solution.

⏱️ Dosage and Administration 61 words ▾

DOSAGE AND ADMINISTRATION As required for irrigation. When used as a diluent, or vehicle for other drugs, the drug manufacturer's recommendations should be followed. Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic techniques. Mix thoroughly. Do not store. Solutions should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permits.

⛔ Contraindications 25 words ▾

CONTRAINDICATIONS 0.9% Sodium Chloride Irrigation is not for injection by usual parenteral routes. An electrolyte solution should not be used for irrigation during electrosurgical procedures.

⚠️ Warnings 127 words ▾

WARNINGS FOR IRRIGATION ONLY. NOT FOR INJECTION. Irrigating fluids have been demonstrated to enter the systemic circulation in relatively large volumes; thus, irrigation solutions must be regarded as systemic drugs.

Absorption of large amounts can cause fluid and/or solute overload resulting in dilution of serum electrolyte concentrations, overhydration, congested states or pulmonary edema. The risk of dilutional states is inversely proportional to the electrolyte concentrations of the administered parenteral solutions. The risk of solute overload causing congested states with peripheral and pulmonary edema is directly proportional to the electrolyte concentration.

Do not warm container above 140°F (60°C). After opening container, its contents should be used promptly to minimize the possibility of bacterial growth or pyrogen formation. Discard unused portion of irrigating solution since it contains no preservatives.

🤒 Adverse Reactions 115 words ▾

ADVERSE REACTIONS Possible adverse effects arising from the irrigation of body cavities, tissues, or indwelling catheters and tubes can be minimized when proper procedures are followed. Displaced catheters or drainage tubes can lead to irrigation or infiltration of unintended structures or cavities. Excessive volume or pressure during irrigation of closed cavities may cause undue distension or disruption of tissues.

Accidental contamination from careless technique may transmit infection. If an adverse reaction does occur, discontinue administration of the irrigant, evaluate the patient, institute appropriate therapeutic countermeasures, and save the remainder of the fluid for examination if deemed necessary. To report SUSPECTED ADVERSE REACTIONS, contact Fresenius Kabi USA, LLC at 1-800-551-7176 or FDA at 1-800-FDA-1088 or www.fda.gov/medwatch.

🔄 Drug Interactions 21 words ▾

Drug Interactions Some additives may be incompatible. Consult with pharmacist. When introducing additives, use aseptic technique. Mix thoroughly. Do not store.

🤰 Pregnancy 55 words ▾

Pregnancy Teratogenic Effects Animal reproduction studies have not been conducted with 0.9% Sodium Chloride Irrigation. It is also not known whether 0.9% Sodium Chloride Irrigation can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. 0.9% Sodium Chloride Irrigation should be given to a pregnant woman only if clearly needed.

🧒 Pediatric Use 36 words ▾

Pediatric Use The safety and effectiveness of 0.9% Sodium Chloride Irrigation in pediatric patients have not been established. Its limited use in pediatric patients has been inadequate to fully define proper dosage and limitations for use.

🧓 Geriatric Use 146 words ▾

Geriatric Use Clinical studies of 0.9% Sodium Chloride Irrigation did not include a sufficient number of patients age 65 years and over to determine whether they respond differently from younger subjects. In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy. This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function.

Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function. Frequent laboratory determinations and clinical evaluations are recommended to monitor changes in blood glucose, electrolyte concentrations, and renal function.

🆘 Overdosage 34 words ▾

OVERDOSAGE In the event of overhydration or solute overload, reevaluate the patient's condition, and institute appropriate corrective treatment. Intravascular volume overload may respond to hemodialysis. See WARNINGS , PRECAUTIONS , and ADVERSE REACTIONS .

🧬 Clinical Pharmacology 160 words ▾

CLINICAL PHARMACOLOGY 0.9% Sodium Chloride Irrigation is utilized for a variety of clinical indications such as sterile irrigation of body cavities, tissues or wounds, indwelling urethral catheters, surgical drainage tubes, and for washing, rinsing or soaking surgical dressings, instruments and laboratory specimens. It also serves as a diluent or vehicle for drugs used for irrigation or other pharmaceutical preparations. 0.9% Sodium Chloride Irrigation provides an isotonic saline irrigation identical in composition with 0.9% Sodium Chloride Injection (normal saline).

Physiological irrigation solutions are considered generally compatible with living tissues and organs. Sodium, the major cation of the extracellular fluid, functions primarily in the control of water distribution, fluid balance, and osmotic pressure of body fluids. Sodium is also associated with chloride and bicarbonate in the regulation of the acid-base equilibrium of body fluid.

Chloride, the major extracellular anion, closely follows the metabolism of sodium, and changes in the acid-base balance of the body are reflected by changes in the chloride concentration.

📦 How Supplied / Storage and Handling 122 words ▾

HOW SUPPLIED 0.9% Sodium Chloride Irrigation, USP is supplied sterile and nonpyrogenic in single-dose flexible plastic containers. Product Code Unit of Sale Each 502010 NDC 65219-502-10 Package of 6 bags NDC 65219-502-01 1000 mL fill in a 1500 mL bag 504020 NDC 65219-504-20 Package of 5 bags NDC 65219-504-02 2000 mL fill in a 2000 mL bag 506030 NDC 65219-506-30 Package of 4 bags NDC 65219-506-03 3000 mL fill in a 3000 mL bag Exposure of pharmaceutical products to heat should be minimized. Avoid excessive heat.

Protect from freezing. Store at 20° to 25°C (68° to 77°F) [see USP Controlled Room Temperature]; however, brief exposure up to 40°C (104°F) does not adversely affect the product. Do not warm container above 140°F (60°C).

📋 Description 133 words ▾

DESCRIPTION Each 100 mL contains: Sodium Chloride, USP 0.9 g; Water for Injection, USP qs pH adjusted with Hydrochloric Acid, NF pH: 5.75 (4.50-7.00) Calculated Osmolarity: 308 mOsmol/liter Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154 0.9% Sodium Chloride Irrigation, USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is: Ingredient Molecular Formula Molecular Weight Sodium Chloride, USP NaCl

58.44The flexible plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers. The solution contact layer is a copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. Not made with natural rubber latex, PVC or DEHP.

⚠️ Precautions ~2 min read ▾

PRECAUTIONS General Use aseptic technique when preparing and administering sterile irrigation solutions. Use only if solution is clear and container and seal are intact. Do not use for irrigation that may result in absorption of large amounts of fluid into the blood.

Caution should be observed when the solution is used for continuous irrigation or allowed to “ dwell ” inside body cavities because of possible absorption into the blood stream and the production of circulatory overload. When used for irrigation via appropriate irrigation equipment, the administration set should be attached promptly. Unused portions should be discarded and a fresh container of appropriate size used for the start up of each cycle or repeat procedure.

For repeated irrigations of urethral catheters, a separate container should be used for each patient. Laboratory Tests Clinical evaluation and periodic laboratory determinations are necessary to monitor changes in fluid balance, electrolyte concentrations, and acid-base balance after prolonged irrigation, when fluid absorption is suspected, or whenever the condition of the patient warrants such evaluation. Drug Interactions Some additives may be incompatible.

Consult with pharmacist. When introducing additives, use aseptic technique. Mix thoroughly.

Do not store. Carcinogenesis, Mutagenesis, Impairment of Fertility Studies with 0.9% Sodium Chloride Irrigation have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility. Pregnancy Teratogenic Effects Animal reproduction studies have not been conducted with 0.9% Sodium Chloride Irrigation.

It is also not known whether 0.9% Sodium Chloride Irrigation can cause fetal harm when administered to a pregnant woman or can affect reproduction capacity. 0.9% Sodium Chloride Irrigation should be given to a pregnant woman only if clearly needed. Labor and Delivery Safety and effectiveness of 0.9% Sodium Chloride Irrigation during labor and delivery have not been established.

Caution should be exercised, and the fluid balance, glucose and electrolyte concentrations, and acid-base balance, of both mother and fetus should be evaluated periodically or whenever warranted by the condition of the patient or fetus. Nursing Mothers It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when 0.9% Sodium Chloride Irrigation is administered to a nursing woman.

Pediatric Use The safety and effectiveness of 0.9% Sodium Chloride Irrigation in pediatric patients have not been established. Its limited use in pediatric patients has been inadequate to fully define proper dosage and limitations for use. Geriatric Use Clinical studies of 0.9% Sodium Chloride Irrigation did not include a sufficient number of patients age 65 years and over to determine whether they respond differently from younger subjects.

In general, dose selection for an elderly patient should be cautious, usually starting at the low end of the dosing range, reflecting the greater frequency of decreased hepatic, renal, or cardiac function, and of concomitant disease or other drug therapy. This drug is known to be substantially excreted by the kidney, and the risk of toxic reactions to this drug may be greater in patients with impaired renal function. Because elderly patients are more likely to have decreased renal function, care should be taken in dose selection, and it may be useful to monitor renal function.

Frequent laboratory determinations and clinical evaluations are recommended to monitor changes in blood glucose, electrolyte concentrations, and renal function.

🍼 Nursing Mothers 37 words ▾

Nursing Mothers It is not known whether this drug is excreted in human milk. Because many drugs are excreted in human milk, caution should be exercised when 0.9% Sodium Chloride Irrigation is administered to a nursing woman.

📄 Carcinogenesis, Mutagenesis, Impairment of Fertility 25 words ▾

Carcinogenesis, Mutagenesis, Impairment of Fertility Studies with 0.9% Sodium Chloride Irrigation have not been performed to evaluate carcinogenic potential, mutagenic potential, or effects on fertility.

📖 Instructions for Use ~1 min read ▾

INSTRUCTIONS FOR USE: Not for Injection. Not for use with pressurized irrigation systems. Check solution container composition, lot number, and expiry date.

Irrigation solutions should be inspected visually for particulate matter and discoloration prior to administration, whenever solution and container permit. Do not use if the solution is cloudy or precipitate is present. Check the solution container for leaks by squeezing firmly.

If leaks are found, discard. The intact port cap provides visual tamper evidence. Do not use if port cap is prematurely removed.

Maintain strict aseptic technique during handling. To Add Medication: 1. Identify WHITE Additive Port with arrow pointing toward solution container.

2. Immediately before injecting additives, break off WHITE Additive Port Cap with the arrow pointing toward solution container. 3.

Hold base of WHITE Additive Port. 4. Insert needle (18 – 23 gauge) through the center of the WHITE Additive Port's resealable septum and inject additives.

5. Mix solution container contents thoroughly. 6.

WHITE additive port must be swabbed with disinfection agent before repuncturing. 7. Check admixture visually for particulate matter.

Preparation for Administration 1. Immediately before inserting the irrigation set, break off BLUE Administration Port Cap with the arrow pointing away from the solution container. 2.

Use non-vented irrigation set or close the air-inlet on a vented set. Refer to directions for use accompanying the irrigation set. 3.

Hold the base of the BLUE Administration Port, twist and push spike until fully inserted. 4. The BLUE Administration Port contains a self-sealing septum that helps prevent leakage after removing the spike.

The Administration Port is not intended to be spiked more than once. 5. Suspend solution container from hanger hole.

6. For Single Use Only. Discard unused portion.

Manufactured for: Lake Zurich, IL 60047 Made in Germany www.fresenius-kabi.com/us 451818A Revised: January 2025 Fresenius Kabi Logo

📄 Package Label / Principal Display Panel ~1 min read ▾

PACKAGE LABEL – PRINCIPAL DISPLAY – 0.9% Sodium Chloride Irrigation, USP 1000 mL Bag Label solu flex ® NDC 65219- 502 -01 1000 mL 0.9% SODIUM CHLORIDE IRRIGATION, USP ISOTONIC SOLUTION FOR IRRIGATION nacl-label-01.jpg

PACKAGE LABEL – PRINCIPAL DISPLAY – 0.9% Sodium Chloride Irrigation, USP 1000 mL Case Label NDC 65219-502-10 502010 0.9% Sodium Chloride Irrigation, USP 1,000 mL x 6 STORE AT: 20 ° to 25 ° C (68 ° to 77 ° F) [see USP Controlled Room Temperature] Avoid excessive heat. Protect from freezing. nacl-label-02.jpg

PACKAGE LABEL – PRINCIPAL DISPLAY – 0.9% Sodium Chloride Irrigation, USP 2000 mL Bag Label solu flex ® NDC 65219- 504 -02 2000 mL 0.9% SODIUM CHLORIDE IRRIGATION, USP ISOTONIC SOLUTION FOR IRRIGATION nacl-label-03.jpg

PACKAGE LABEL – PRINCIPAL DISPLAY – 0.9% Sodium Chloride Irrigation, USP 2000 mL Case Label NDC 65219-504-20 504020 0.9% Sodium Chloride Irrigation, USP 2,000 mL x 5 STORE AT: 20 ° to 25 ° C (68 ° to 77 ° F) [see USP Controlled Room Temperature] Avoid excessive heat. Protect from freezing. nacl-label-04.jpg

PACKAGE LABEL – PRINCIPAL DISPLAY – 0.9% Sodium Chloride Irrigation, USP 3000 mL Bag Label solu flex ® NDC 65219- 506 -03 3000 mL 0.9% SODIUM CHLORIDE IRRIGATION, USP ISOTONIC SOLUTION FOR IRRIGATION nacl-label-05.jpg

PACKAGE LABEL – PRINCIPAL DISPLAY – 0.9% Sodium Chloride Irrigation, USP 3000 mL Case Label NDC 65219-506-30 506030 0.9% Sodium Chloride Irrigation, USP 3,000 mL x 4 STORE AT: 20 ° to 25 ° C (68 ° to 77 ° F) [see USP Controlled Room Temperature] Avoid excessive heat. Protect from freezing. nacl-label-06.jpg

Source: FDA Structured Product Labeling, mirrored from DailyMed / openFDA. Prefer the government’s original formatting? View this label on DailyMed ↗

Medicare Part D spend CMS · PART D · 2026 (Q1)

Medicare Part D (outpatient prescription) spending for Sodium Chloride — the program that covers self-administered drugs. 9 manufacturers.
⚠️ Drug-level data: CMS publishes Part D spending by drug, not by NDC — these figures combine every manufacturer, strength and package size sold under the name Sodium Chloride. That’s a different level of aggregation than the Medicaid card above, which is specific to this exact 11-digit NDC (pack size included), so the two aren’t directly comparable.
Period
Total Part D spend
$2.42M
Claims incl. refills
105K
Beneficiaries
50.3K
Spend / beneficiary
$48.15
Spend / claim
$23.08
Trend by period
💵 About the dollar figures: spending is what Part D plans paid before confidential manufacturer rebates, so the program’s real net cost is lower. A blank patient count means fewer than 11 people — CMS hides counts that small to protect privacy. Source: CMS Medicare Quarterly Part D Spending by Drug (data.cms.gov), updated quarterly.

About this NDC listing & data coverage

Finished prescription product
What data is (and isn’t) available for this NDC — tap to expand
NDC identity (package / product / labeler codes) ✓ Available
Labeler ✓ Available
Product & package description ✓ Available
Marketing category & status ✓ Available
Active ingredient / dosage form / route ✓ Available
FDA label (SPL via DailyMed) ✓ Available
Package photos ✓ Available
Inactive ingredients (structured) ✓ Available
NADAC pharmacy acquisition price (CMS) — Not published for this NDC CMS publishes NADAC only for NDCs reported in its retail-pharmacy survey.
Orange Book / therapeutic-equivalence data ✓ Available
HCPCS J-code billing crosswalk ✓ Available
Medicaid utilization (CMS SDUD) — Not published for this NDC CMS reports utilization only for NDCs with Medicaid claims above its privacy threshold.
“Not published” reflects what the public FDA / CMS / NLM sources provide for this exact package code — it is a property of the data feeds, not a judgment about the product.

Questions about this listing

Why is there no price listed?
The pricing shown on our NDC pages comes from CMS NADAC, a voluntary survey of retail community pharmacy invoices. CMS does not publish a NADAC for every NDC — packages outside the retail survey (institutional and hospital products, bulk packages, discontinued items, and many OTC items) may never receive one. A missing price reflects the survey's scope, not this product's actual cost, and does not mean the product is free or unavailable.
Is the NDC printed on the package the same as the 11-digit billing NDC?
Yes, they identify this exact package in different formats. The form printed on the packaging and shown on DailyMed is the one the FDA registered. Insurance claims use a fixed 11-digit 5-4-2 format, so the short segment is padded with a leading zero and the dashes are dropped. The Identity section at the top of this page lists each form of this code.
Is this package still being marketed?
Yes, per the latest FDA NDC Directory data on this page: this package is listed as actively marketed, with no marketing end date reported by Fresenius Kabi USA, LLC. Listing status can change — the directory data on this page refreshes weekly.
Who lists this product with the FDA?
Fresenius Kabi USA, LLC is the labeler of record for this NDC — the company under whose FDA-assigned code the package is listed. The labeler may be the manufacturer itself or a distributor marketing the product under its own code.
Do I need a prescription for this product?
This NDC is listed with FDA as a prescription product, so it is dispensed under a prescriber's order. Your pharmacist can tell you whether any over-the-counter forms of the same medication exist.
Does this product have a billing J-code?
Yes — this NDC cross-references HCPCS code A4217 for medical-claim billing (typically used when a product is administered in a clinical setting rather than dispensed at a retail pharmacy). See the Billing section on this page.
This page identifies an FDA-listed package (the NDC) and reports public regulatory and pricing data about the listing. It is reference information, not a medical recommendation — talk to your pharmacist or prescriber about your own medication.
Where does this data come from?
Listing facts (marketing category, packager status, marketing dates) from the FDA openFDA NDC Directory; label availability from DailyMed; pricing coverage from CMS NADAC; equivalence scope from the FDA Orange Book.
For educational and professional reference only — not medical advice. Pricing reflects published NADAC and CMS ASP (free public data) and may differ from your acquisition cost; always verify before billing or dispensing.